spitfires (date)
March 21, 2006
- Re: Re: Family outing, Laura Gharazeddine, 12:18
- spitfire input shaft specs needed (single rail), Brad Kahler, 12:18
- Re: Re: Ignition switch connections..., Laura Gharazeddine, 12:18
- Re: Re: Spitfire/GT6 magazine, Laura Gharazeddine, 12:17
- Re: Re: Spitfire/GT6 magazine, Laura Gharazeddine, 12:17
- Re: Parcel Trays, Laura Gharazeddine, 12:17
- Re: Cheap Herald for sale in L.A., Laura Gharazeddine, 12:17
- Re: RE: IGN lighting up, Laura Gharazeddine, 12:17
- L.A. Drivers license- APOLOGY, Laura Gharazeddine, 12:17
- L.A.Drivers license-non LBC humour-but automotive related, Laura Gharazeddine, 12:17
- Alternator Bracket Needed, Laura Gharazeddine, 12:17
- Re: Re: Must see movie, Laura Gharazeddine, 12:17
- English Tunes-non LBC, Laura Gharazeddine, 12:17
- Re: Re: Good Seat Idea, Laura Gharazeddine, 12:17
- Re: Re: Soggy Trousers, Laura Gharazeddine, 12:17
- Re: Old weird Herald-dream cars?, Laura Gharazeddine, 12:17
- Re: Door Opening, Laura Gharazeddine, 12:17
- Re: Fwd: 21st Annual San Diego British Car Day, Laura Gharazeddine, 12:17
- Re: More on tires, Laura Gharazeddine, 12:17
- Re: RE: Bye, unsubscribing, Laura Gharazeddine, 12:17
- Re: Fwd: Los Angeles British Meet 2000, Laura Gharazeddine, 12:17
- Re: handbrake fixings, Laura Gharazeddine, 12:17
- Re: RE: Spitfires for sale, Laura Gharazeddine, 12:17
- Re: September 21-24 visit to Indy, Laura Gharazeddine, 12:17
- Re: Dash light reflection, Laura Gharazeddine, 12:17
- Re: unintentional error, Laura Gharazeddine, 12:17
- Re: Re: Gore and the Internal Combustion Engine, Laura Gharazeddine, 12:17
- Re: RE: Gore and the Internal Combustion Engine, Laura Gharazeddine, 12:17
- Re: RE: Trunk restoration, Laura Gharazeddine, 12:17
- Re: Re: Trunk restoration, Laura Gharazeddine, 12:17
- Re: Re: Spitfire parts at regular auto stores, Laura Gharazeddine, 12:17
- Re: RE: test: please delete, Laura Gharazeddine, 12:17
- Re: Re: Dash lights, Laura Gharazeddine, 12:17
- Re: RE: Chromed windshield frame?, Laura Gharazeddine, 12:17
- Re: Woodly Park info request, Laura Gharazeddine, 12:17
- Re: Silicone brake fluid identification (limited lbc content), Laura Gharazeddine, 12:17
- Re: RE: Chromed windshield frame?, Laura Gharazeddine, 12:17
- Re: Re: Fw: Neanderthal's Perspective, Laura Gharazeddine, 12:17
- Re: RE: Chromed windshield frame?, Laura Gharazeddine, 12:17
- Re: RE: Chromed windshield frame?, Laura Gharazeddine, 12:17
- Re: Fwd: Fw: Men's Perspective-nothing funny here!, Laura Gharazeddine, 12:17
- Re: Re: Fwd: Fw: Men's Perspective, Laura Gharazeddine, 12:17
- tandem axle trailer for sale in LA (maybe!), Brad Kahler, 12:17
September 30, 2000
- Re: GT6 MK1 numbers, Joe Curry, 20:06
- remote clutch bleed, Fred Griffiths, 19:28
- GT6 MK1 numbers, Fred Griffiths, 16:13
- rims, John & Tracy Knox, 12:21
- Re: Stowe, VT, Graham Stretch, 12:18
- Re: spitfire input shaft specs needed (single rail), William Manning, 10:42
- Re: After market Rims, PorscheRcr, 09:33
- Re: After market Rims, Carter Shore, 09:14
September 29, 2000
- More Wheel Info (Something I left out), OHFASTONE, 21:49
- Re: After market Rims, PorscheRcr, 21:38
- British Car Club forming in Southeastern Ma., KTnKT, 21:11
- Re: Tool Caddys, Rich, 19:30
- Available Wheels and Price Ranges, OHFASTONE, 16:38
- Re: family outing, FODFARTS, 16:33
- Re: After market Rims, Tburke4, 14:43
- RE: After market Rims, Graziano, Michael, 14:31
- Re: After market Rims, Douglas Frank, 14:07
- Re: RH door wanted for MkIII, Suzie, 12:55
- Re: Sidemarker plinth replacement, Barry Schwartz, 12:42
- Sidemarker plinth replacement, Dave Chu, 11:46
- Re: where in the UK to get Parts-thanks and update, alemen@pop.ftconnect.com, 10:56
- Re: where in the UK to get Parts-thanks and update, Nick Moseley, 10:15
- Re: needles, T. .R. Dafforn, 09:51
- Re: spitfire input shaft specs needed (single rail), Joe Curry, 08:38
- Re: RH door wanted for MkIII, Joe Curry, 08:28
- Small Chassis 3-3/4 inch bolt circle -, Barry Schwartz, 07:37
- RE: spitfire input shaft specs needed (single rail), Davies William-qswi646, 07:21
- RE: RH door wanted for MkIII, Mitchell, Doug (D.B.), 05:45
- Re: After market Rims, Luke Lewis, 05:36
September 28, 2000
- Re: After market Rims, Chris Taylor, 20:18
- external door handle push rods, Fred Griffiths, 19:49
- Re: family outing, Fred Griffiths, 19:37
- Re: Family outing, AandHVentures, 19:29
- Giving up on Mk2,3,IV and 1500 restorations, SJagGo, 18:57
- Re: family outing, DT Gebhard, 18:28
- RE Miata Seats, david_schenck, 18:23
- Re: After market Rims, mark holbrook, 17:15
- Re: Re. Blown Fuse, John T. Blair, 17:12
- Re: family outing, Keith R. Stewart, 17:10
- Thanks (Was Aftermarket wheels), Jason, 16:52
- Re. Blown Fuse, Sean & Shannon Twigg, 15:53
- RH door wanted for MkIII, Suzie, 15:37
- Re: Family outing, alemen@pop.ftconnect.com, 15:29
- Re: Ignition switch connections..., John Goethert, 15:13
- RE: Re: Spitfire/GT6 magazine, David A. Templeton, 15:04
- Family outing, Howard Baugues, 14:27
- family outing, Fred Thomas, 13:22
- RE: Ignition switch connections..., Graziano, Michael, 12:59
- Ignition switch connections..., Mike Welch, 12:32
- Re: needles alirght! alright! BTDT :-), Ptegler, 11:45
- Re: needles, Nolan Penney, 11:20
- RE: Spitfire/GT6 magazine, Jack Levy, 10:17
- Re: Re: Spitfire/GT6 magazine, Chuck Cassaro, 10:15
- Re: After market Rims, Barry Schwartz, 09:58
- re: parts in UK, Robert Gunther, 09:42
- needles, T. .R. Dafforn, 09:41
- Re: Spitfire/GT6 magazine, Jeff McNeal, 09:35
- Re: '63 Spit value, Jeff McNeal, 09:33
- Re: After market Rims, Ken C, 09:14
- Re: After market Rims, mark holbrook, 09:04
- Spitfire/GT6 magazine, David A. Templeton, 08:51
- Re: After market Rims, Michael D. Nugent, Ph.D., 08:34
- Re: Off to the races, Mike Ross, 07:57
- Also: Gearbox reconditioning - Marina box?, Graziano, Michael, 07:26
- RE: Gearbox reconditioning - Marina box?, Graziano, Michael, 06:57
- RE: Driving season is over, Mitchell, Doug (D.B.), 06:56
- Tool Caddys, Bowen, Patrick, 06:33
- RE: Off to the races, Bowen, Patrick, 06:06
- Re: Driving season is over, Ken Strayhorn, 06:05
- Re: After market Rims, Nolan Penney, 05:36
- Re: After market Rims, Nolan Penney, 05:16
- Re: After market Rims, Carter Shore, 04:45
- Re: Where in the UK to buy Spit body parts?, Richard B Gosling, 04:35
- Off to the races, Chris Crisenbery, 00:49
- Re: After market Rims, PorscheRcr, 00:33
September 27, 2000
- After market Rims, OHFASTONE, 23:42
- Re: Driving season is over, Jeff McNeal, 23:24
- '68 Spitfire found on Yahoo for $200, Susan Hensley, 21:09
- Re: After market Rims, Vic Whitmore, 20:39
- RE: After market Rims, Bill Miller, 19:43
- seized clutch!, Fred Griffiths, 19:37
- Gearbox reconditioning - Marina box?, McKey, Paul, 19:05
- Driving season is over, BillG, 18:05
- RE: Parcel Trays, BillG, 17:42
- After market Rims, Jason, 17:09
- Parcel Trays, Jason K. Cullum, 17:03
- Re: Where in the UK to buy Spit body parts?, Jonathan Miles, 14:11
- Cheap Herald for sale in L.A., William Manning, 13:42
- San Diego British Car Day 2000, Richard Feibusch, 13:15
- RE: IGN lighting up, Graziano, Michael, 13:12
- Re: Choke cable, Eric Kieboom, 13:02
- Re: IGN lighting up, A666K, 12:45
- IGN lighting up, Jeff Gruber, 12:08
- Thermo switch for Electric Fan conversion - recommendations?, Gary Kristjansson, 10:18
- Miata Seats, SMatson802, 10:08
- Re: Post-Mk3 tonneau - UK version?, Philip Johnson, 09:44
- Re: Pro Blend - 40 Below (reply tp Nolan), Nolan Penney, 06:01
- Thermo switch for Electric Fan conversion - recommendations?, L&B Lubbers, 05:29
- RE: Hood (Softtop) Cover Fitting, Eric Kieboom, 03:12
- Tires Located, OHFASTONE, 02:04
September 26, 2000
- Spitfire Glovebox Fabrication, Jeff McNeal, 23:44
- Re: GT6 magnetic-less gas cap (a little long as usual :-}), PorscheRcr, 21:26
- Re: cylinder head, PorscheRcr, 20:57
- Re: L.A.Drivers license-non LBC humour-but automotive related, PorscheRcr, 20:54
- RE: Rusty Flywheel, Bill Miller, 19:38
- RE: Hood (Softtop) Cover Fitting, BillG, 19:31
- Rimmers shipping, McKey, Paul, 17:12
- Choke cable, 1784T2Y4DY, 16:39
- Pro Blend - 40 Below (reply tp Nolan), Barry Schwartz, 13:56
- Re: Pro Blend - 40 Below, Nolan Penney, 13:19
- Re: GT6 magnetic-less gas cap (a little long as usual :-}), Nolan Penney, 13:04
- Post-Mk3 tonneau - UK version?, Michael Nugent, 12:59
- RE: Pro Blend - 40 Below, Graziano, Michael, 12:24
- Pro Blend - 40 Below, Barry Schwartz, 12:01
- NASS and the Totally Triumph Auction, Bowen, Patrick, 11:58
- Re: Picture of New Tan?, Eric Kieboom, 11:53
- USGP Report (no LBC), Mitchell, Doug (D.B.), 11:33
- Where in the UK to buy Spit body parts?, Nick Moseley, 11:23
- Re: Picture of New Tan?, Ptegler, 11:13
- Re: Wheels & tires, Luke Lewis, 11:01
- Re: Seats, Luke Lewis, 10:56
- Formula One (a little LBC), AandHVentures, 10:44
- richer needles and stronger damper springs!, T. .R. Dafforn, 10:42
- RE: Rusty Flywheel, Craig Smith, 09:33
- Re: Rusty Flywheel, Tburke4, 09:26
- Re: Hood (Softtop) Cover Fitting, Eric Kieboom, 09:07
- Re: Rusty Flywheel, mark holbrook, 08:53
- RE: little Triumph convertible sportscar, David A. Templeton, 08:30
- little Triumph convertible sportscar, bauguesh, 08:20
- GT6 magnetic-less gas cap (a little long as usual :-}), Barry Schwartz, 08:08
- Re: Hood (Softtop) Cover Fitting, Fred Griffiths, 08:05
- OOTO, Dean.Dashwood, 02:06
September 25, 2000
- Hood (Softtop) Cover Fitting, McKey, Paul, 21:47
- Re: Blown Fuse, Donald H Locker, 21:44
- Re: Seats, Joe Curry, 20:59
- Seats, BillG, 20:32
- Re Re: cylinder head, FODFARTS, 20:22
- Re: LBC sort of, Carter Shore, 19:39
- Terry L. Thompson?, Jeff McNeal, 19:09
- Re: Re: cylinder head, OHFASTONE, 16:27
- Rusty Flywheel -Reply, Gary Kristjansson, 14:38
- RE: Rusty Flywheel, David A. Templeton, 11:40
- Rusty Flywheel, Tburke4, 11:23
- RE: LBC sort of, David A. Templeton, 09:56
- Re: LBC sort of, Robert Gunther, 09:53
- Re: humor, Tburke4, 09:46
- Re: RE: LBC sort of, alemen@pop.ftconnect.com, 09:37
- humor, Bradley D Richardson, 09:37
- RE: LBC sort of, David A. Templeton, 09:17
- LBC sort of, Craig Smith, 09:12
- Re: Alternator Bracket Needed, Richard B Gosling, 06:04
- Re: Blown Fuse, Dean.Dashwood, 03:51
- Re: cylinder head, Richard B Gosling, 01:52
- What can I paint?, Bruce Larson, 00:21
September 24, 2000
- Wiring harness routing, J Constantino, 23:18
- To reply with text or not, that is a question., J Constantino, 23:10
- Re: Wiring harness routing, Fred Griffiths, 19:50
- Re: Re: Parts Needed, OHFASTONE, 15:15
- Re: Soggy Trousers, OHFASTONE, 13:37
- Wiring harness routing, Howard Baugues, 13:20
- Re: Movie list of Spit-spotting, Jeff McNeal, 11:15
- Movie list of Spit-spotting, Lyta Byron, 10:55
- Re: Distribtor Rebuild, DT Gebhard, 08:22
- Re: Parts Needed, Gospitt, 01:14
September 23, 2000
- Re: Must see movie, SpitfiresRule, 23:40
- Re: Parts Needed, Robert Gunther, 19:25
- Re: Parts Needed, Rich, 17:58
- RE: Parts Needed, Tim Doyle, 17:36
- RE: Parts Needed, Tim Doyle, 17:31
- Re: Parts Needed, Jeff McNeal, 15:58
- Re: Parts Needed, Bradley D Richardson, 15:17
- RE: Parts Needed, Tim Doyle, 15:09
- Re: Parts Needed, Rich, 14:52
- TRF flyer, Fred Thomas, 14:51
- Re: Blown Fuse, Donald H Locker, 13:53
- Re: Parts Needed, Bradley D Richardson, 12:07
- MK III Parts Book, Douglas Braun & Nadia Papakonstantinou, 11:12
- Re: Must see movie, Douglas Braun & Nadia Papakonstantinou, 10:46
- Re: LBC Support Vehicle Brakes Failing, PorscheRcr, 10:35
- Re: Must see movie, Patrick Baize, 08:36
- Re: Blown Fuse, Mike Ross, 06:33
- RE: Maryland Vehicle Inspection, Sean & Shannon Twigg, 05:06
- Blown Fuse, Sean & Shannon Twigg, 05:06
- Re: LBC Support Vehicle Brakes Failing, Luke Lewis, 04:15
- Re: Must see movie, Jeff McNeal, 01:58
- Must see movie, Joe Curry, 01:08
September 22, 2000
- Re: There's a new Spit owner out there, Curtis, 20:47
- RE: LBC Support Vehicle Brakes Failing, BillG, 20:46
- Re: Soggy Trousers - windshield removal and replacement, L&B Lubbers, 20:08
- There's a new Spit owner out there, Mike Ginter, 20:05
- Re: Soggy Trousers, Nolan Penney, 19:13
- Re: Odd assortment of things...., Nolan Penney, 19:08
- Re: purpose of crank and cam sensors?, Carter Shore, 18:00
- Re: Parts Needed, Jeff McNeal, 16:55
- RE: Parts Needed, Tim Doyle, 16:39
- RE: Maryland Vehicle Inspection, Sean & Shannon Twigg, 16:02
- Odd assortment of things...., Graziano, Michael, 15:41
- Re: Welding steel to stainless, Joe Curry, 15:36
- RE: Welding steel to stainless, Greg Schluge, 15:26
- Re: Parts Needed, Trevor Boicey, 15:08
- OOTO, Mike Ginter, 15:04
- Re: AutoCAD / 3D studio files..., eyp_jl, 14:40
- Re: Parts Needed, Jeff McNeal, 14:34
- Re: Windscreen polishing ( was soggy trousers), alemen@pop.ftconnect.com, 14:32
- Re: Soggy Trousers, Trevor Boicey, 14:21
- Re: LBC Support Vehicle Brakes Failing, Kirk Crawford, 14:17
- Windscreen polishing ( was soggy trousers), alemen@pop.ftconnect.com, 14:02
- Re: Re: Soggy Trousers, alemen@pop.ftconnect.com, 14:00
- Parts Needed, Tim Doyle, 13:45
- RE: LBC Support Vehicle Brakes Failing, Chris Sharp, 13:43
- Re: LBC Support Vehicle Brakes Failing, Luke Lewis, 13:32
- Re: purpose of crank and cam sensors?, Luke Lewis, 13:30
- Re: Delamination (was: Soggy Trousers), Joe Curry, 11:59
- Delamination (was: Soggy Trousers), Douglas Frank, 11:23
- Re: Soggy Trousers, Nolan Penney, 11:06
- LBC Support Vehicle Brakes Failing, Kirk Crawford, 10:52
- RE: Cleaning A Soft Top, David A. Templeton, 10:49
- Re: Soggy Trousers, Richard B Gosling, 09:59
- Daffy Maxed, Richard B Gosling, 09:55
- Re: Soggy Trousers, Tburke4, 09:51
- Re: Distribtor Rebuild, Ptegler, 09:50
- Re: Cleaning A Soft Top, AandHVentures, 09:25
- Indy British Motor Days, AandHVentures, 09:25
- Re: Soggy Trousers, alemen@pop.ftconnect.com, 09:06
- Re: Soggy Trousers, Douglas Braun & Nadia Papakonstantinou, 08:41
- Re: Soggy Trousers, Douglas Braun & Nadia Papakonstantinou, 08:39
- Re: purpose of crank and cam sensors?, Donald H Locker, 07:45
- Re: Soggy Trousers -Reply, Gary Kristjansson, 07:45
- RE: purpose of crank and cam sensors?, David A. Templeton, 07:43
- purpose of crank and cam sensors?, Bowen, Patrick, 07:39
- Distribtor Rebuild, DT Gebhard, 07:13
- Re: AutoCAD / 3D studio files..., Ptegler, 06:26
- Re: Soggy Trousers, Richard B Gosling, 06:07
- Re: Soggy Trousers, Patrick Barber, 05:15
- Re: cylinder head, Richard B Gosling, 03:15
- AutoCAD / 3D studio files..., Jason Tilley, 02:22
- Re: Soggy Trousers, Richard B Gosling, 02:21
- This Guy Wantsa Woodie (and who doesn't?), Richard Feibusch, 00:00
September 21, 2000
- Re: Another Spitfire for SALE, Curtis, 21:23
- Cleaning A Soft Top, Bill Munts, 20:29
- Re: Joke - car related, SJagGo, 17:17
- Re: splitting the difference, John Cave, 13:18
- Re: Wheels & tires, Luke Lewis, 13:14
- Re: Re: Good Seat Idea, Luke Lewis, 13:08
- Re: Speed Cable on OD trans, Ree Gurley, 11:40
- Reasonable price for original wood steering wheel, Mike Ross, 11:06
- RE: Another Spitfire for SALE, Mike Welch, 09:08
- Re: Soggy Trousers, Douglas Braun & Nadia Papakonstantinou, 08:22
- www.team.net, Douglas Braun & Nadia Papakonstantinou, 08:18
- Re: cylinder head, Vic Whitmore, 07:17
- All I can say is have a look, Jack Levy, 05:05
- Re: balance shafts (car-related, but not very LBC), Richard B Gosling, 03:06
- Re: cylinder head, Dean.Dashwood, 03:01
- Re: Exhaust manifold/downpipe gasket, Richard B Gosling, 01:33
- Re: Soggy Trousers, LT, 00:29
September 20, 2000
- Re: balance shafts, OHFASTONE, 23:24
- ARP Hardware, OHFASTONE, 22:04
- Wheels & tires, Ken C, 21:17
- Another Spitfire for SALE, Curtis, 21:11
- Re: Speed Cable on OD trans, Joe Curry, 20:48
- Speed Cable on OD trans, david_schenck, 20:33
- Spitfire for SALE, Mike Ginter, 19:25
- New email address, Mike Ginter, 19:22
- Re: Good Seat Idea, Luke Lewis, 16:43
- Re: Bronte Creek, Luke Lewis, 16:39
- Re: balance shafts, Donald H Locker, 15:05
- Joke - car related, Suzie, 13:56
- Re: 4-2-1 Exhaust Header, Vic Whitmore, 12:42
- Re: Lucas fuses, Ptegler, 11:39
- Re Balance shafts (correction), Barry Schwartz, 10:27
- Re: balance shafts, Greg Rowe, 09:53
- Re: balance shafts, Barry Schwartz, 09:32
- balance shafts, Bowen, Patrick, 08:36
- Re: Observations, alemen@pop.ftconnect.com, 08:36
- Waterloo Drivetrain Systems/British European Motors, John J. Black, 08:33
- RE: Lucas fuses, Chris De Wet, 08:31
- RE: Lucas fuses, Chris De Wet, 08:27
- Re: cylinder head, Joe Curry, 08:12
- Re: Observations, Carter Shore, 07:57
- RE: cylinder head, Graziano, Michael, 07:17
- RE: Observations, Graziano, Michael, 07:09
- Re: Observations, Barry Schwartz, 06:54
- Disappointed in Lucas, Mitchell, Doug (D.B.), 05:28
- Re: Soggy Trousers, Greg Rowe, 05:21
- Exhaust manifold/downpipe gasket, Richard B Gosling, 04:29
- Re: Soggy Trousers, Richard B Gosling, 02:13
- RE: Spitfires for sale, Chris De Wet, 01:32
- RE: Spitfires for sale, Chris De Wet, 01:28
September 19, 2000
- Re: cylinder head, Joe Curry, 23:55
- cylinder head, John Weber, 23:12
- Re: Observations, Joe Curry, 23:00
- Re: Observations, Alan Lemen, 22:59
- Re: Observations, Joe Curry, 22:23
- Observations, Douglas Braun & Nadia Papakonstantinou, 22:08
- Re: 4-2-1 Exhaust Header, N.A. Campiglia III, 21:24
- Re: 4-2-1 Exhaust Header, Cwn74, 21:00
- Re: 4-2-1 Exhaust Header, Cwn74, 21:00
- Re: 4-2-1 Exhaust Header, Bill Munts, 20:40
- Re: 4-2-1 Exhaust Header, Bob Harris, 19:59
- Radiator, david_schenck, 19:35
- 4-2-1 headers, James F. Libecco, 19:00
- Re: 4-2-1 Exhaust Header, Nolan Penney, 17:56
- Re: Re: 4-2-1 Exhaust Header, alemen@pop.ftconnect.com, 16:59
- Re: 4-2-1 Exhaust Header, Cwn74, 16:30
- More Seat Detail, david_schenck, 16:08
- Re: 4-2-1 Exhaust Header, Keith R. Stewart, 15:37
- Re: Soggy Trousers, Richard B Gosling, 10:12
- Re: 4-2-1 Exhaust Header, alemen@pop.ftconnect.com, 09:40
- Re: Re: Re: Soggy Trousers, alemen@pop.ftconnect.com, 09:36
- Re: splitting the difference (more on the 3.27 diffs), Barry Schwartz, 09:14
- Re: Copper Sealing Washers, (was leaky J-type overdrive), PorscheRcr, 08:41
- Re: splitting the difference, John Cave, 08:02
- Re: MKII Rear Window Seal, Jeff McNeal, 07:56
- Re: Soggy Trousers, Richard B Gosling, 07:51
- Re: Soggy Trousers, Douglas Braun & Nadia Papakonstantinou, 07:43
- Re: Soggy Trousers, Douglas Braun & Nadia Papakonstantinou, 07:39
- Re: MKII Rear Window Seal, Vic Whitmore, 07:38
- RE: 4-2-1 Exhaust Header, Graziano, Michael, 07:36
- RE: 4-2-1 Exhaust Header, Craig Smith, 07:27
- 4-2-1 Exhaust Header, Vic Whitmore, 07:12
- RE: A gentle Reminder, Chris De Wet, 06:30
- resolution of pulling the harmonic balancer on a buick, Bowen, Patrick, 06:10
- RE: Shorter coil springs?, Bowen, Patrick, 06:07
- Re: Wiper Motor, frandrum, 06:07
- Re: Old weird Herald-dream cars?, Carter Shore, 05:55
- Re: Copper Sealing Washers, (was leaky J-type overdrive), Carter Shore, 05:53
- Re: Soggy Trousers, T. .R. Dafforn, 04:27
- Soggy Trousers, Richard B Gosling, 04:02
- Re: Tail Happy, Dean.Dashwood, 03:19
- Re: End float measurement, simon.halliwell, 02:51
- Re: Copper Sealing Washers, (was leaky J-type overdrive), Trevor Boicey, 01:23
September 18, 2000
- New lessons learned (kinda long), Glenn Trunnell, 23:23
- Re: Copper Sealing Washers, (was leaky J-type overdrive), Donald H Locker, 21:10
- Re: End float measurement, Donald H Locker, 21:03
- Re: upside down steering wheel, Jeff Gruber, 20:29
- RE: MK1 Bolt pattern, Chris Sharp, 19:55
- Re: Copper Sealing Washers, (was leaky J-type overdrive), Vic Whitmore, 19:54
- Re: Good Seat Idea, Mike Ross, 19:48
- Re: Importing car from Canada to USA, John & Tracy Knox, 19:41
- Thrust Washers, Fred Griffiths, 19:21
- Good Seat Idea, david_schenck, 18:11
- Re: Lucas fuses, John T. Blair, 18:08
- Re: Old weird Herald, Carter Shore, 16:06
- Re: Importing car from Canada to USA, Chris DeStaffany, 15:08
- RE: Bronte Creek, David A. Templeton, 13:58
- Re: Bronte Creek, Luke Lewis, 13:06
- pulling the harmonic balancer on a buick, Bowen, Patrick, 12:29
- Re: thrust washers, Joe Curry, 12:10
- RE: thrust washers, Graziano, Michael, 11:54
- Re: Shorter coil springs?, Kevin Rhodes, 11:53
- Re: Shorter coil springs?, Douglas Frank, 11:37
- Re: Tail Happy, Douglas Frank, 11:33
- Re: thrust washers, Nolan Penney, 11:12
- Re: thrust washers, Dave Chu, 11:09
- Re: handbrake fixings, john, 11:07
- Re: splitting the difference, Barry Schwartz, 10:58
- RE: thrust washers, Graziano, Michael, 10:50
- thrust washers, James F. Libecco, 10:39
- advice sought on refurbishing front and rear suspension, Help, 10:32
- Re: splitting the difference, John Cave, 10:26
- RE: Engine bench test question, Mike Welch, 09:57
- Sunday Afternoon Drive (long), Chris Sharp, 09:46
- Hardtop door glass seal, alemen@pop.ftconnect.com, 09:42
- Re: Breather pipe removal, Joe Curry, 09:42
- Re: End float measurement, Joe Curry, 09:33
- Old weird Herald, Reginald Tulk, 09:13
- Breather pipe removal, DAVID ARMITAGE, 09:12
- Re: splitting the difference, Ken C, 09:11
- End float measurement, simon.halliwell, 09:03
- Re: Lucas fuses, Douglas Braun & Nadia Papakonstantinou, 08:54
- Re: splitting the difference, Barry Schwartz, 08:51
- Re: Tail Happy, PorscheRcr, 08:29
- splitting the difference, John Cave, 08:18
- Lucas fuses, Chris De Wet, 08:16
- Re: Shorter coil springs?, Kevin Rhodes, 08:08
- Re: Re: Importing car from Canada to USA, Ptegler, 07:58
- Shorter coil springs?, Mike Ross, 07:53
- Re: Importing car from Canada to USA, Ptegler, 07:38
- Engine bench test question, Mike Ross, 06:59
- RE: Tail Happy, Craig Smith, 06:14
- Re: More on tires, Nolan Penney, 06:05
- Re: Copper Sealing Washers, (was leaky J-type overdrive), Nolan Penney, 05:59
- Re: Intake manifold question, Nolan Penney, 05:55
- Re: Importing car from Canada to USA, Nolan Penney, 05:51
- Re: Tail Happy, Dean.Dashwood, 03:42
- Re: Door Opening, Richard B Gosling, 03:27
September 17, 2000
- Fwd: Re: Importing car from Canada to USA, OHFASTONE, 23:36
- Re: Importing car from Canada to USA, Trevor Boicey, 22:55
- Re: Bronte Creek, David Templeton, 21:07
- Re: Bronte Creek, Vic Whitmore, 20:43
- Re: Bronte Creek, David Templeton, 20:27
- Importing car from Canada to USA, Douglas Braun & Nadia Papakonstantinou, 20:01
- Re: Door Opening, Chris DeStaffany, 19:53
- Re: Bronte Creek, David Templeton, 19:34
- What happened to Road&Track?), Richard Feibusch, 18:59
- Re: Bronte Creek, Luke Lewis, 17:59
- Re: Bronte Creek, Vic Whitmore, 17:54
- Re: Bronte Creek, Denise & Glenn Swan, 11:40
- Re: Door Opening, Tburke4, 10:31
- Bronte Creek, David Templeton, 10:09
- Door Opening, Craig Smith, 09:49
September 16, 2000
- Intake manifold question, Glenn Trunnell, 23:43
- RE: tail happy., James F. Libecco, 23:23
- Copper Sealing Washers, (was leaky J-type overdrive), Trevor Boicey, 23:20
- Re: Hard top trim, Alan Lemen, 22:22
- Re: Hard top trim, SJagGo, 19:56
- MK1 Bolt pattern, Jason K. Cullum, 19:42
- Re: Hard top trim, Greg Thorsley, 19:18
- Re: Hard top trim, SJagGo, 18:55
- Fwd: 21st Annual San Diego British Car Day, WyzeGuy555, 18:00
- RE: More on tires, BillG, 16:06
- tail happy., James F. Libecco, 15:04
- Hard top trim, Alan Lemen, 12:11
- 21st Annual San Diego British Car Day, Richard Feibusch, 10:44
- Engine Lathes Available, Karl J. Schmitt, 09:13
- Re: Bye, unsubscribing, Keith R. Stewart, 08:51
- Re: Body Work Preparation - Rust and Bondo, Tburke4, 08:12
- Leaking J-type overdrive... but where?, Trevor Boicey, 03:00
- Re: More on tires, OHFASTONE, 01:07
- Re: More on tires, PorscheRcr, 00:26
- More on tires, OHFASTONE, 00:19
September 15, 2000
- Re: Tail Happy, PorscheRcr, 23:36
- Re: Tail Happy, PorscheRcr, 23:17
- BATTLE OF BRITAIN 2000, Richard Feibusch, 21:40
- Re: Tail Happy, Luke Lewis, 21:25
- Re: Body Work Preparation - Rust and Bondo, Nolan Penney, 19:57
- Re: Bye, unsubscribing, Bradley D Richardson, 18:39
- RE: Bye, unsubscribing, Simmons, Reid W, 18:27
- Re: Bye, unsubscribing, Nolan Penney, 17:56
- RE: handbrake fixings, BillG, 17:25
- Re: Bye, unsubscribing, Keith R. Stewart, 15:35
- RE: Bye, unsubscribing, Craig Smith, 14:32
- Re: Bye, unsubscribing, Douglas Frank, 14:22
- Website, Graham Stretch, 13:28
- Tail Happy, Craig Smith, 13:20
- Re: Maryland Vehicle Inspection, Ree Gurley, 10:55
- Re: Spitfires for sale, Joe Curry, 10:01
- Re: Body Work Preparation - Rust and Bondo, rtgetzinger, 09:42
- Re: Spitfires for sale, Jeff McNeal, 09:24
- Re: Body Work Preparation - Rust and Bondo, Joe Curry, 08:47
- Re: handbrake fixings, Joe Curry, 08:39
- RE: All British Car Day 2000, Kingston, ON, David A. Templeton, 08:37
- All British Car Day 2000, Kingston, ON, Bill Gunshannon, 08:35
- Body Work Preparation - Rust and Bondo, Graziano, Michael, 07:59
- Re: Maryland Vehicle Inspection, Nolan Penney, 07:33
- Re: handbrake fixings, john, 07:15
- Re: Trailing Arms, Keith R. Stewart, 05:23
- (Fwd) Re: UK Fuel blockade, DAVID ARMITAGE, 04:44
- RE: Spitfires for sale, Chris De Wet, 04:14
- UK Fuel blockade, Richard B Gosling, 02:29
September 14, 2000
- Fwd: Los Angeles British Meet 2000, WyzeGuy555, 23:25
- Los Angeles British Meet 2000, Richard Feibusch, 22:47
- RE: RE: Spitfires for sale, BillG, 20:43
- Maryland Vehicle Inspection, John Baker, 19:14
- Re: Trailing Arms, R.D. Waid, 17:32
- Re: website, Jeff McNeal, 17:22
- website, Graham Stretch, 17:06
- RE: Coolant flow direction on 78 Spit., Graziano, Michael, 16:37
- Re: Coolant flow direction on 78 Spit., Douglas Braun & Nadia Papakonstantinou, 16:37
- Coolant flow direction on 78 Spit., Dave Chu, 16:21
- Re: handbrake fixings, Joe Curry, 16:18
- All British Car day 2000, Kingston, ON, Bill Gunshannon, 15:52
- All British Car Day 2000, Kingston, ON, Bill Gunshannon, 15:50
- Re: thrust washers, Cwn74, 15:02
- Bye, unsubscribing, Simmons, Reid W, 13:06
- RE: RE: Spitfires for sale, Douglas Braun & Nadia Papakonstantinou, 11:53
- handbrake fixings, SJagGo, 11:52
- Taxes, Suzie, 11:49
- RE: RE: Spitfires for sale, David A. Templeton, 11:37
- RE: Electric woos and lessons learned, David A. Templeton, 11:32
- Re: RE: Spitfires for sale, Douglas Braun & Nadia Papakonstantinou, 11:28
- Electric woos and lessons learned, David A. Templeton, 10:53
- Re: Trunk Floor, Mike Ross, 10:48
- Re: RE: Spitfires for sale, alemen@pop.ftconnect.com, 10:38
- Re: Trailing Arms, Joe Curry, 09:52
- RE: Spitfires for sale, David A. Templeton, 09:49
- Re: Spitfires for sale, Douglas Braun & Nadia Papakonstantinou, 09:43
- Trunk Floor, Douglas Braun & Nadia Papakonstantinou, 09:38
- Spitfires for sale, Mike Ginter, 09:06
- Re: POR15, Vic Whitmore, 07:35
- Re: POR15, Nolan Penney, 06:30
- Re: Trailing Arms, tw1, 05:51
- Re: Trailing Arms, Dr T. Dafforn, 03:47
- RE: early overdrive, Chris De Wet, 02:48
September 13, 2000
- thrust washers, John Weber, 22:38
- [Fwd: POR15], Chris Taylor, 21:02
- Re: British Car Show, BILL McDEVITT, 20:44
- RE: POR15, BillG, 20:43
- Re: British Car Show, Curtis, 20:00
- Re: Rubber bumper to Chrome coversion?, Mike Ginter, 19:58
- Trailing Arms, DT Gebhard, 19:16
- Rubber bumper to Chrome coversion?, G faber, 19:13
- Re: British Car Show, Mike Ginter, 17:20
- Re: POR15, Chris DeStaffany, 16:59
- Re: POR15, Mike Ross, 16:23
- Re: MK II Rear Window Seal, Mike Ross, 16:16
- Re: POR15, Vic Whitmore, 14:47
- Re: POR15, Nolan Penney, 13:09
- British Car Show, BILL McDEVITT, 11:19
- Tonneau Cover Studs Wanted, R.D. Waid, 11:12
- RE: British Car Show, Mike Welch, 10:53
- Re: SU Needle selection and Air/Fuel Gauges, T. .R. Dafforn, 09:49
- RE: POR15 - No lBC but one of the funniest things of the year., Graziano, Michael, 09:33
- RE: POR15, Graziano, Michael, 09:04
- Re: POR15, Vic Whitmore, 08:44
- POR15, Robert Gunther, 08:18
- RE: triumphs at "bronte", David A. Templeton, 08:11
- Re: triumphs at "bronte", John Cave, 06:19
- Engine inspection, DAVID ARMITAGE, 03:09
- Re: MK II Rear Window Seal, Richard B Gosling, 02:22
- Re: RE: veneering masonite, OHFASTONE, 00:19
September 12, 2000
- Dash light reflection, Chris DeStaffany, 22:58
- Re: veneering masonite, Howard Baugues, 20:20
- RE: veneering masonite, John Weber, 19:26
- 73 GT6 brakes, Sam Gentry, 18:10
- Re: MK II Rear Window Seal, Suzie, 17:14
- Re: veneering masonite, OHFASTONE, 17:12
- Re: The British Invasion, JM Dion, 17:10
- Sleeves, OHFASTONE, 16:14
- Car Show NE Ohio, this weekend, Dave Simpson, 15:59
- Re: triumphs at "bronte", Chris Taylor, 15:13
- Re: MK II Rear Window Seal, Douglas Braun & Nadia Papakonstantinou, 14:42
- Re: triumphs at "bronte", Keith R. Stewart, 14:14
- re: Gore( Bore )<no score>{any more}, rtgetzinger, 13:31
- The British Invasion, tom popkes, 12:11
- Re: MK II Rear Window Seal, Joe Curry, 11:58
- Gore( Bore ), BILL McDEVITT, 11:55
- Re: MK II Rear Window Seal, Jeff McNeal, 11:34
- September 21-24 visit to Indy, Mitchell, Doug (D.B.), 11:17
- RE: triumphs at "bronte", Mitchell, Doug (D.B.), 11:10
- RE: MK II Rear Window Seal, Mitchell, Doug (D.B.), 10:52
- RE: Exhausting problem...., Mitchell, Doug (D.B.), 10:50
- Re: triumphs at "bronte", Luke Lewis, 09:56
- Re: RE: slave cyl ?, alemen@pop.ftconnect.com, 09:46
- Fwd: Re: workshop manual for Triumph Spitfire 1500, Jeff Gruber, 09:10
- Re: early overdrive, Joe Curry, 09:07
- Re: slave cyl ?, alemen@pop.ftconnect.com, 08:57
- Re: triumphs at "bronte", Vic Whitmore, 08:33
- list question, PorscheRcr, 08:26
- triumphs at "bronte", John Cave, 08:21
- RE: One more electric fan conversion question, Chris De Wet, 07:28
- RE: early overdrive, Chris De Wet, 07:19
- RE: MK II owner's manual, Chris De Wet, 06:49
- 1939 Triumph Dolomite Roadster, Chris De Wet, 06:18
- RE: Substitute Parts, Chris De Wet, 04:16
- Re: MK II Rear Window Seal, Philip Johnson, 01:12
September 11, 2000
- veneering masonite, John Weber, 23:12
- Re: Shaky Spit - Update + Solution, OHFASTONE, 20:52
- slave cyl ?, Tommy Cox, 20:05
- Re: Fw: Heater fan orientation, David Templeton, 17:26
- Re: Fw: Heater fan orientation, Joe Curry, 17:17
- Fw: Heater fan orientation, David Templeton, 16:48
- Re: torque wrenches, Thearthurhsmith, 16:00
- Top frames, Tod Jones, 15:37
- unintentional error, SJagGo, 14:55
- manual saga goes on, Jeff Gruber, 14:51
- RE: Stromberg 150CD, Graziano, Michael, 14:44
- Stromberg 150CD, Craig Smith, 13:55
- Re: Thrust washer disaster, Joe Curry, 13:53
- RE: Spitfire parts at regular auto stores, Bill Gunshannon, 13:28
- Re: Gore and the Internal Combustion Engine, Douglas Frank, 13:28
- Re: Spitfire parts at regular auto stores, Bill Gunshannon, 13:24
- Re: MK II Rear Window Seal, Suzie, 13:22
- Re: Gore and the Internal Combustion Engine, SJagGo, 11:47
- Compression and Rings, frandrum, 11:21
- RE: Gore and the Internal Combustion Engine, Simmons, Reid W, 10:50
- Re: Exhausting problem...., Douglas Braun & Nadia Papakonstantinou, 09:17
- RE: Exhausting problem...., Graziano, Michael, 08:57
- RE: MK II Rear Window Seal, Chris De Wet, 08:31
- Re: MK II Rear Window Seal, Jeff McNeal, 08:31
- Exhausting problem...., Kevin Rhodes, 07:54
- Re: Fw: Shaky Spit - Update + Solution, Stephane St-Amant, 07:23
- Stromberg, Craig Smith, 06:15
- Re: MK II Rear Window Seal, Philip Johnson, 05:48
- Re: COMPLETE SHOP MANUAL, Dean.Dashwood, 04:43
- RE: MK II Rear Window Seal, Chris De Wet, 04:37
- Thrust washer disaster, DAVID ARMITAGE, 04:25
- Re: torque wrenches, OHFASTONE, 00:47
- GT6 radius arms wanted, Edward Hamilton, 00:08
September 10, 2000
- GT6 Sighting, Paul Cartwright, 23:54
- RE: Trunk restoration, John Weber, 23:41
- Re: Trunk restoration, Bob Sykes, 23:38
- Re: torque wrenches, M Hutchinson, 22:06
- Re: Trunk restoration, Fred Griffiths, 21:17
- Re: Water pump pulley, Dave Chu, 21:13
- I can Spit four thousand clicks -- road trip report., Andy Warfield, 20:53
- Re: torque wrenches, Flinthoof Ponypal, 19:42
- Re: torque wrenches, Douglas Braun & Nadia Papakonstantinou, 19:13
- Re: torque wrenches, Nolan Penney, 18:50
- Re: Fw: Shaky Spit - Update + Solution, Nolan Penney, 18:28
- torque wrenches, Bradley D Richardson, 18:14
- Re: Water pump pulley, L&B Lubbers, 17:25
- RE: BPNW, Chris DeStaffany, 16:44
- RE: BPNW, Tim Doyle, 13:48
- Fw: Gore and the Internal Combustion Engine, BILL McDEVITT, 11:43
- Water pump pulley, Dave Chu, 10:28
- Re: BPNW, AandHVentures, 09:07
- RE: Fw: Shaky Spit - Update + Solution, John Weber, 00:40
September 09, 2000
- Re: Shaky Spit - Update + Solution, richard bonilla, 21:08
- Cooling system filter, slick & cheap!, Nolan Penney, 20:27
- Re: Welding steel to stainless, Nolan Penney, 20:21
- Re: Fw: Shaky Spit - Update + Solution, Nolan Penney, 20:11
- Re: Shaky Spit - Update, PorscheRcr, 19:56
- A Very Good Spitfire Day, R.D. Waid, 19:13
- pollution plumbing - '71 Mk IV, Fred Griffiths, 18:02
- BPNW, John Weber, 17:48
- head reinstall, John Weber, 17:46
- Fw: Shaky Spit - Update + Solution, Stephane St-Amant, 16:41
- Cancelled Subscription, Stephen Hall, 15:14
- Re: Welding steel to stainless, reed mideke, 14:14
- Re: Fan makes popping noise, L&B Lubbers, 13:16
- Re: New Spitfire resource, L&B Lubbers, 12:59
- Re: Spitfires List - Disenroll, L&B Lubbers, 12:52
- Re: MK II Rear Window Seal, Philip Johnson, 12:43
- Signing off..., Dr. Faustus, 12:23
- Re: Shaky Spit - Update, Stephane St-Amant, 11:11
- Multiple Message - Sorry, Greg Thorsley, 10:24
- MKII Rear Window Seal, Greg Thorsley, 10:20
- MKII Rear Window Seal, Greg Thorsley, 10:19
- MK II Rear Window Seal, Greg Thorsley, 10:16
- Vic British quality?, Fred Griffiths, 10:00
- MK II Rear Window Seal, Greg Thorsley, 09:52
- Re: New Spitfire resource, Jeff McNeal, 08:54
- RE: welding cast iron, Greg Schluge, 07:47
- Re: New Spitfire resource, Bradley D Richardson, 07:33
- RE: Floor pan repair, Greg Schluge, 07:25
- Welding steel to stainless, Michael D. Nugent, Ph.D., 05:08
- Re: SU Needle selection and Air/Fuel Gauges, Carter Shore, 04:45
- Flushing sug. for brakes (kinda long as usual :-}), LT, 02:50
- Re: MK II owner's manual, PorscheRcr, 00:34
September 08, 2000
- Re: What size screw holds the auto choke on?, John & Judy Tones, 23:11
- Re: Shaky Spit, SpitfiresRule, 22:21
- Fan makes popping noise, M. E. Foster, 22:12
- Re: Spitfire parts at regular auto stores, Luke Lewis, 21:42
- RE: Noisier after bump, Greg Hendrix, 21:14
- Re: Shaky Spit, Nolan Penney, 20:33
- Spitfires List - Disenroll, Art Fournier, 18:50
- Re: Bentley vs Leyland manual, Donald H Locker, 18:17
- RE: delete button test, Tim Doyle, 17:56
- RE: Shaky Spit, Tim Doyle, 17:55
- Bentley vs Leyland manual, Fred Griffiths, 17:49
- Re: Trunk restoration, Vic Whitmore, 14:19
- Re: Noisier after bump, Greg Hendrix, 14:10
- delete button test, Thearthurhsmith, 14:09
- Re: Shaky Spit, Vic Whitmore, 13:55
- Re: Fuel Alternatives??, Douglas Braun & Nadia Papakonstantinou, 13:49
- Trunk restoration, rtgetzinger, 13:44
- MK II owner's manual, Diane Pataki, 13:36
- Re: Shaky Spit, Joe Curry, 13:35
- Shaky Spit, Stephane St-Amant, 13:33
- Re: Noisier after bump, Trevor Boicey, 13:27
- Re: Incredible Touring Weather!, Bill Gunshannon, 12:23
- Re: What size screw holds the auto choke on?, Nolan Penney, 12:08
- What size screw holds the auto choke on?, John Weale, 11:56
- Re: Spitfire parts at regular auto stores, Sam Gentry, 11:45
- SU Needle selection and Air/Fuel Gauges, Nolan Penney, 11:43
- RE: COMPLETE SHOP MANUAL, Simmons, Reid W, 11:34
- Fuel Alternatives??, Suzie, 11:33
- RE: Spitfire parts at regular auto stores, Simmons, Reid W, 11:24
- Re: Spitfire parts at regular auto stores, Bill Gunshannon, 10:24
- Fwd: RE: Thanks to all..., Howard Baugues, 10:07
- Re: Flushing sug. for brakes (kinda long as usual :-}), Douglas Braun & Nadia Papakonstantinou, 10:05
- Re: Supertrapp, Tom Ambrose, 10:02
- Re: Thanks to all..., Eric A. Yates, 09:45
- RE: Thanks to all..., Brad Richardson, 09:31
- Re: Flushing sug. for brakes (kinda long as usual :-}), Barry Schwartz, 09:00
- Thanks to all..., hill, 08:48
- RE: COMPLETE SHOP MANUAL, Mike Welch, 08:32
- RE: test: please delete OK, David A. Templeton, 08:21
- Re: test: please delete OK, Thearthurhsmith, 08:16
- RE: Welding Spit body panels, Greg Schluge, 08:03
- Re: Supertrapp, DT Gebhard, 07:55
- Re: Spitfire parts at regular auto stores, DT Gebhard, 07:43
- Re: Noisier after bump, Nolan Penney, 06:46
- RE: Supertrapp, Jack Levy, 05:36
- Re: Hummmmmm, Dean Dashwood, 02:04
September 07, 2000
- Re: COMPLETE SHOP MANUAL, Jeff Gruber, 21:33
- Re: COMPLETE SHOP MANUAL, Douglas Braun & Nadia Papakonstantinou, 21:27
- Re: Supertrapp, Tom Ambrose, 21:24
- Wimpy crying about content, Craig Smith, 20:54
- Re: COMPLETE SHOP MANUAL, Dave Chu, 20:48
- Re: COMPLETE SHOP MANUAL, Jeff Gruber, 20:35
- RE: test: please delete, Tim Doyle, 19:24
- test: please delete, Mike Ross, 18:25
- Re: Spitfire parts at regular auto stores, Sam Gentry, 18:02
- Re: Spitfire parts at regular auto stores, David Templeton, 18:00
- Supertrapp, Bill Munts, 17:29
- Re: Dash lights, SJagGo, 17:21
- Dash lights, 1784T2Y4DY, 17:12
- Spitfire parts at regular auto stores, Nolan Penney, 17:09
- Re: Tuning/Emissions Question, Nolan Penney, 16:26
- Re: COMPLETE SHOP MANUAL, Nolan Penney, 15:57
- Re: Air/Fuel Gauge/Sensor Location, Nolan Penney, 15:47
- Humour - car related!, Suzie, 15:31
- Re: Silicone brake fluid identification (limited lbc content), Nolan Penney, 15:20
- Re: Was (Re: valves) but contains NO LBC CONTENT, Joe Curry, 14:57
- RE: One more electric fan conversion question, Chris DeStaffany, 14:08
- Was (Re: valves) but contains NO LBC CONTENT, HD883HUGGR, 13:47
- finding the rim size pt.2, Dean Martz, 13:06
- Re: How to ruin a perfectly good door, Kevin Hillman, 11:35
- Re: One more electric fan conversion question, Dave Chu, 10:11
- Re: valves #2, Douglas Braun & Nadia Papakonstantinou, 09:52
- Re: valves #2, Dave Chu, 09:46
- Re: valves #2, Joe Curry, 09:46
- Re: COMPLETE SHOP MANUAL, Dave Chu, 09:39
- Re: valves #2, Joe Curry, 09:34
- COMPLETE SHOP MANUAL, Jeff Gruber, 09:27
- RE: Low compression in number 2, Graziano, Michael, 09:14
- valves #2, John Weber, 09:09
- RE: Low compression in number 2, Jeff Gruber, 08:44
- RE: One more electric fan conversion question, Chris De Wet, 08:28
- RE: Chromed windshield frame?, Chris De Wet, 08:12
- Re: Air/Fuel Gauge/Sensor Location, Carter Shore, 08:09
- RE: Low compression in number 2, Mitchell, Doug (D.B.), 08:08
- Fallfest Directions!!!!!!!, Graziano, Michael, 08:07
- Hummmmmm, Thearthurhsmith, 06:45
- RE: valves, Graziano, Michael, 06:29
- RE: Take it where it belongs!, Bowen, Patrick, 06:10
- RE: valves, Bowen, Patrick, 06:04
- RE: One more electric fan conversion question, Chris De Wet, 04:45
- RE: Chromed windshield frame?, Chris De Wet, 04:19
- Los Angeles British Car Meet 2000, Richard Feibusch, 03:30
- New Spitfire resource, Jeff McNeal, 01:41
- Re: Air/Fuel Gauge/Sensor Location, PorscheRcr, 00:19
- Re: really want to rant over something??, Trevor Boicey, 00:06
September 06, 2000
- Re: One more electric fan conversion question, Chris DeStaffany, 21:39
- Re: Take it where it belongs!, dayton carpenter, 21:32
- Re: Silicone brake fluid identification (limited lbc content), Howard Baugues, 21:12
- Re: 78 Spit electric fan conversion, Joe Curry, 20:31
- Re: 78 Spit electric fan conversion, Donald H Locker, 20:08
- welding cast iron, Greg Rowe, 19:59
- welding cast iron, Dave Simpson, 19:29
- Re: Silicone brake fluid identification (limited lbc content), Vic Whitmore, 19:24
- How to ruin a perfectly good door, Jeff McNeal, 18:50
- Re: Silicone brake fluid identification (limited lbc content), Jeff McNeal, 18:29
- RE: Fuel. Check. Fire. Fire. Hello, Fire?, Tim Doyle, 18:20
- Re: valves, MikeC, 18:01
- RE: Woodly Park info request, David Moag, 17:55
- Re: Low compression in number 2, Joe Curry, 17:54
- Low compression in number 2, Jeff Gruber, 17:38
- Re: Silicone brake fluid identification (limited lbc content), Joe Curry, 17:19
- Re: Re: Fuel. Check. Fire. Fire. Hello, Fire?, alemen@pop.ftconnect.com, 16:41
- Re: Re: Fuel. Check. Fire. Fire. Hello, Fire?, alemen@pop.ftconnect.com, 16:36
- Welding the Exhaust Manifold, Jeff Gruber, 16:27
- Fw: finding your rim size, Michael T. Altomare, 16:09
- really want to rant over something??, Thearthurhsmith, 15:26
- One more electric fan conversion question, Dave Chu, 14:58
- Re: Air/Fuel Gauge/Sensor Location, Barry Schwartz, 14:55
- Re: Noisier after bump, Trevor Boicey, 14:34
- Re: Fuel. Check. Fire. Fire. Hello, Fire?, Michael Nugent, 14:04
- Re: Men's Perspective, John T. Blair, 13:41
- Re: Air/Fuel Gauge/Sensor Location, Nolan Penney, 13:25
- Re: Fw: Men's Perspective, Douglas Frank, 12:59
- My Bonnet Has a Scratch, Chris Sharp, 12:49
- Woodly Park info request, Barry Schwartz, 12:32
- Silicone brake fluid identification (limited lbc content), Nolan Penney, 12:03
- Re: Air/Fuel Gauge/Sensor Location, Carter Shore, 11:39
- Re: Air/Fuel Gauge/Sensor Location, mark holbrook, 10:59
- Re: valves, Joe Curry, 10:42
- Re: Fuel. Check. Fire. Fire. Hello, Fire?, alemen@pop.ftconnect.com, 10:27
- valves, John Weber, 10:26
- Air/Fuel Gauge/Sensor Location, Graziano, Michael, 10:17
- RE: PDWA operation, Craig Smith, 09:47
- RE: Fuel. Check. Fire. Fire. Hello, Fire?, Craig Smith, 09:38
- Shelby Wheels, last chance, Joe Curry, 09:26
- Fw: Shipping Eyes, Ree Gurley, 09:20
- Re: Fuel. Check. Fire. Fire. Hello, Fire?, Flinthoof Ponypal, 09:11
- PDWA operation, Barry Schwartz, 09:11
- Re:Men's Perspective-enough!, Vic Whitmore, 08:07
- Re: Fwd: Fw: Men's Perspective-nothing funny here!, Bradley D Richardson, 07:43
- Re: finding your rim size, Nolan Penney, 06:48
- Re: Noisier after bump, Nolan Penney, 06:42
- Re: Fuel. Check. Fire. Fire. Hello, Fire?, Richard B Gosling, 06:37
- RE: Wiper going wrong way, Bowen, Patrick, 06:04
- Re: New Project, SpitfiresRule, 00:51
- Re: Chromed windshield frame?, Jeff McNeal, 00:25
- Re: Fw: Men's Perspective, Gospitt, 00:22
- RE: Chromed windshield frame?, Chris De Wet, 00:16
- RE: Chromed windshield frame?, Chris De Wet, 00:08
September 05, 2000
- Re: Ebay GT6, special GT6?, PorscheRcr, 23:48
- Re: 78 Spit electric fan conversion, Dave Chu, 23:01
- Re: GT6 windshield frame install, Douglas Braun & Nadia Papakonstantinou, 22:59
- GT6 windshield frame install, J Constantino, 22:42
- Shipping Eyes, Ree Gurley, 22:21
- Re: Shipping Eyes, Joe Curry, 22:17
- Fuel. Check. Fire. Fire. Hello, Fire?, Flinthoof Ponypal, 21:30
- RE: Fwd: Fw: Men's Perspective-nothing funny here!, BillG, 20:56
- RE: Fwd: Fw: Men's Perspective, BillG, 20:36
- Re: Fwd: Fw: Men's Perspective, Lyta Byron, 20:16
- Re: Fwd: Fw: Men's Perspective-nothing funny here!, dayton carpenter, 19:58
- Re: Sense of Humor!!??, Jeff McNeal, 19:37
- 78 Spit electric fan conversion, Dave Chu, 19:34
- Re: Alternate Rimmer Brother contact wanted, Edward Hamilton, 19:25
- Re: RE: Chromed windshield frame?, Jeff McNeal, 19:20
- Re: Sense of Humor!!??, Jeff McNeal, 19:17
- Re: Chromed windshield frame?, Joe Curry, 19:02
- atlanta spit owners, richard bonilla, 18:42
- Re: New Project, Patrick Baize, 18:14
- Welded manifolds, Simmons, Reid W, 18:14
- Re: Noisier after bump, Donald H Locker, 17:58
- Reminder - Palo Alto Meet 2000, Richard Feibusch, 17:25
- Parts Page, Glenn Trunnell, 17:19
- Re: Fw: Neanderthal's Perspective, Thearthurhsmith, 17:14
- finding your rim size, Dean Martz, 17:09
- Re: Sense of Humor!!??, BILL McDEVITT, 16:29
- RE: RE: Chromed windshield frame?, Graziano, Michael, 15:58
- Leaky Spit, Kirk Crawford, 15:30
- 73 Gt6 brakes, Sam Gentry, 15:12
- Re: RE: Chromed windshield frame?, Jeff McNeal, 15:07
- Re: Alternate Rimmer Brother contact wanted, Dave Chu, 14:54
- Re: Noisier after bump, Jeff Gruber, 14:47
- Re: RE: Chromed windshield frame?, Douglas Braun & Nadia Papakonstantinou, 14:39
- Database, Joe Curry, 14:30
- Re: Noisier after bump, Trevor Boicey, 14:29
- Whoops! SORRY! was Men's Perspective-nothing funny here!, Greg Rowe, 14:27
- Re: Fwd: Fw: Men's Perspective, Joe Curry, 14:21
- New Project, Joe Curry, 14:19
- Re: Fwd: Fw: Men's Perspective-nothing funny here!, Greg Rowe, 14:09
- Re: Re: Fwd: Fw: Men's Perspective, rtgetzinger, 14:06
- Re: Fwd: Fw: Men's Perspective, Joe Curry, 13:48
- Re: Alternate Rimmer Brother contact wanted, Bill Gunshannon, 13:46
- Re: Alternate Rimmer Brother contact wanted, Jeff McNeal, 12:43
- RE: Sense of Humor!!??, Graziano, Michael, 12:15
- Sense of Humor!!??, BILL McDEVITT, 12:15
- Alternate Rimmer Brother contact wanted, Dave Chu, 12:11
- Re: Sense of Humor!!??, Jeff McNeal, 11:58
- Fallfest?, Graziano, Michael, 10:19
- Re: Chromed windshield frame?, Jeff McNeal, 10:09
- Midget 1500 (Spitfire) Alternator Conversion Completed, Graziano, Michael, 10:00
- Tire fitment spreadsheet, Nolan Penney, 09:52
- Re: Ebay GT6, special GT6?, Karl Theis, 09:45
- Re: Chromed windshield frame?, Ken C, 09:30
- Re: Chromed windshield frame?, Joe Curry, 09:17
- Re: Fwd: Fw: Men's Perspective, Chuck Cassaro, 09:17
- Re: Chromed windshield frame?, Nolan Penney, 09:16
- RE: Chromed windshield frame?, Mitchell, Doug (D.B.), 09:13
- Re: Chromed windshield frame?, Jeff McNeal, 09:11
- Re: Chromed windshield frame?, Joe Curry, 09:09
- Re: Chromed windshield frame?, Barry Schwartz, 09:08
- Re: Fwd: Fw: Men's Perspective, Fred Thomas, 09:05
- RE: Chromed windshield frame?, Craig Smith, 08:58
- Re: Chromed windshield frame?, Bradley D Richardson, 08:55
- Re: Fw: Men's Perspective, bauguesh, 08:53
- Re: Fw: Men's Perspective, M.Hesselink, 08:52
- RE: Chromed windshield frame?, Tom Ambrose, 08:47
- Re: Chromed windshield frame?, Joe Curry, 08:45
- Re: Chromed windshield frame?, Jeff McNeal, 08:43
- Re: Chromed windshield frame?, Nolan Penney, 08:41
- RE: Fw: Men's Perspective, Chris De Wet, 08:35
- RE: Chromed windshield frame?, Craig Smith, 08:34
- RE: Chromed windshield frame?, Barry Schwartz, 08:30
- Re: Fw: Men's Perspective, PorscheRcr, 08:28
- Re: Chromed windshield frame?, Joe Curry, 08:25
- Re: Differential Question, PorscheRcr, 08:19
- Re: Fwd: Fw: Men's Perspective, DT Gebhard, 08:17
- Re: upside down steering wheel, Jeff Gruber, 08:08
- Re: Fwd: Fw: Men's Perspective, Bradley D Richardson, 08:04
- RE: Chromed windshield frame?, Craig Smith, 07:59
- Re: Fw: Men's Perspective, Bill Gunshannon, 07:53
- Chromed windshield frame?, Jeff McNeal, 07:47
- Re: Fwd: Fw: Men's Perspective, M.Hesselink, 07:40
- Fwd: Fw: Men's Perspective, Nolan Penney, 07:14
- RE: Noisier after bump, Jeff Gruber, 06:34
- RE: Differential Question, Craig Smith, 06:15
- RE: Noisier after bump, Craig Smith, 05:40
- Re: Rev <4000rpm sorted, so now the overdrive, Richard B Gosling, 01:54
September 04, 2000
- Re: upside down steering wheel, Joe Curry, 23:14
- Yet another Spitfire web page, Flinthoof Ponypal, 22:52
- Re: early overdrive, Cwn74, 20:03
- re: 7 blade fan, 1784T2Y4DY, 19:51
- Re: Taking a drive -- thanks to all, Mike Nelson, 18:03
- Differential Question, david_schenck, 17:57
- Taking a drive -- thanks to all, Jeff McNeal, 16:45
- Re: upside down steering wheel, Tony Childs, 16:03
- Request for help - sorta lbc-ish, Suzie, 15:49
- early overdrive, Rob Travis, 13:20
- Re: Rev <4000rpm sorted, so now the overdrive, T. .R. Dafforn, 09:54
- 1978 Spitfire radiator braces, James, Ray, 09:40
- '74 Spit has to go - whole or parted, Greg Hendrix, 08:56
- Re: Tuning/Emissions Question, david_schenck, 07:53
- Re: Wiper going wrong way, John T. Blair, 07:18
- Wiper going wrong way, John Baker, 04:52
- Re: Tuning/Emissions Question, Fred Thomas, 04:11
September 03, 2000
- Ignition lamp flicker, BillG, 22:11
- Re: Window cranks, Luke Lewis, 21:39
- Re: Window cranks, Luke Lewis, 21:38
- Re: Tuning/Emissions Question, Greg Rowe, 21:18
- Re: Ebay GT6, special GT6?, Fred Griffiths, 21:09
- Tuning/Emissions Question, david_schenck, 20:11
- Re: Transmission switches, SJagGo, 18:53
- pulley and fan, MikeC, 18:43
- Window cranks!!, BILL McDEVITT, 18:17
- DOT-5, BILL McDEVITT, 18:10
- Re: DOT-5, Jeff McNeal, 18:03
- Re: Floorpan repair, Mike Ross, 15:56
- Shoreham Airshow - the 'Bear' Essentials, Suzie, 14:00
- Re: Single carb air filter cover size?, Chris Taylor, 10:57
- Re: Altenator gave up the electrons, Patrick Baize, 08:14
- Re: Leaking brake line connection, Donald H Locker, 06:01
September 02, 2000
- Re: Floorpan repair, Mike Ross, 23:07
- Re: Window cranks, Joe Curry, 22:58
- Window cranks, AandHVentures, 22:49
- Ebay GT6, special GT6?, Jack Levy, 19:55
- Leaking brake line connection, Jeff McNeal, 19:49
- Looking for Convertable tops (hoods), Chris DeStaffany, 19:20
- Re: Noisier after bump, Luke Lewis, 18:45
- Re: Altenator gave up the electrons, Luke Lewis, 18:42
- Re: Wheel Studs, Bradley D Richardson, 13:29
- Re: Tuning SU's, Flinthoof Ponypal, 10:23
- Re: Transmission switches, Gary Tash, 10:16
- Re: Fix-A-Flat ????, wizardz, 10:14
- Re: Hood Frame rebuild, Keith R. Stewart, 09:40
- Hood Frame rebuild, Fred Griffiths, 09:11
- Re: On reading messages, M.Hesselink, 07:33
- inaccurate tachometer, Spitfire 1500, 01:16
- Re: Tuning SU's, Trevor Boicey, 00:36
- Re: Tuning SU's, Dave Chu, 00:18
- Re: Tuning SU's, Joe Curry, 00:12
September 01, 2000
- Re: Floorpan repair, Trevor Boicey, 23:44
- Tuning SU's, Flinthoof Ponypal, 23:05
- Re: SU carb question, Nolan Penney, 22:37
- On reading messages, Nolan Penney, 22:21
- Re: Floorpan repair, Nolan Penney, 22:14
- Re: Fix-A-Flat, Nolan Penney, 22:05
- Re: Altenator gave up the electrons, Nolan Penney, 22:00
- Re: A little bit of humour [non lbc], Lyta Byron, 21:44
- Re: Noisier after bump, M.Hesselink, 21:40
- Re: Noisier after bump, wizardz, 21:24
- Fw: Altenator gave up the electrons, Tod Jones, 19:08
- Re: valves, Patrick Baize, 17:35
- Re: Wheel Studs, Jeff McNeal, 17:16
- Re: Noisier after bump, Dave Chu, 17:12
- Re: upside down steering wheel, Jeff McNeal, 17:03
- Wheel Studs, Bradley D Richardson, 17:01
- Re: Noisier after bump, Jeff McNeal, 16:41
- Re: upside down steering wheel, Joe Curry, 16:32
- Noisier after bump, Jeff Gruber, 16:22
- upside down steering wheel, Jeff Gruber, 16:19
- RE: Altenator gave up the electrons, Graziano, Michael, 15:28
- Black goo on trim, Jack Levy, 15:08
- traffic, Fred Thomas, 15:05
- Re: traffic, alemen@pop.ftconnect.com, 15:00
- Re: Jet question, Dave Chu, 14:36
- A little bit of humour [non lbc], Suzie, 14:32
- Re: Fix-A-Flat, Ptegler, 14:25
- Re: Transmission switches, SJagGo, 14:24
- Fix-A-Flat, HD883HUGGR, 14:09
- Re: SU jets question, alemen@pop.ftconnect.com, 13:58
- Re: Altenator gave up the electrons, Luke Lewis, 13:55
- Re: Floorpan repair, Michael Nugent, 13:28
- Re: SU jets question, Donald H Locker, 13:23
- Re: SU jets question, stu bollen, 13:22
- Re: Floorpan repair, Donald H Locker, 13:16
- Re: Floorpan repair, Donald H Locker, 13:14
- Re: SU jets question, Ptegler, 13:12
- Re: SU carb question, Donald H Locker, 13:09
- RE: SU jets question, Craig Smith, 13:03
- SU jets question, Ken Strayhorn, 12:52
- Re: SU carb question, Nolan Penney, 12:25
- Re: Transmission switches, Ptegler, 12:21
- Re: Floorpan repair, Nolan Penney, 12:20
- Re: Transmission switches, Joe Curry, 12:15
- Re: Weber Carbs, Nolan Penney, 11:58
- Re: Re: Spitfire O/D wiring and oil, alemen@pop.ftconnect.com, 11:52
- Floorpan repair, Michael Nugent, 11:49
- Re: Carpet snaps (now studs), alemen@pop.ftconnect.com, 11:37
- RE: Transmission switches, BillG, 11:37
- Re: Shelby wheels "found", Jeff McNeal, 09:47
- RE: Weber installation, Craig Smith, 09:31
- Re: Shelby wheels "found", Joe Curry, 09:21
- Re: Shelby wheels "found", Jeff McNeal, 09:20
- Re: Weber installation, Joe Curry, 09:16
- RE: Transmission switches, Bowen, Patrick, 09:15
- Re: Spitfire O/D wiring and oil, Richard B Gosling, 09:12
- Re: SU carb question, Douglas Braun & Nadia Papakonstantinou, 08:59
- Weber Carbs, Jjcousins, 08:55
- Re: Carpet snaps, Douglas Braun & Nadia Papakonstantinou, 08:53
- Beaulieu Auto Jumble, Fred Griffiths, 08:45
- Transmission switches, BillG, 08:31
- Re: SU carb question, Joe Curry, 08:31
- Weber DGV, Joe Curry, 08:29
- Re: Carpet snaps, Mike Ginter, 08:26
- Re: Shelby wheels "found", Joe Curry, 08:25
- Re: SU carb question, Ptegler, 08:04
- SU carb question, stu bollen, 08:00
- Re: Suspension setup?!, Vic Whitmore, 07:38
- Re: Carpet snaps, Jeff McNeal, 06:40
- Re: Carpet snaps, Nolan Penney, 04:33
- Re: Rev <4000rpm sorted, so now the overdrive, Richard B Gosling, 04:28
- Re: Altenator gave up the electrons, Tod Jones, 03:26
- Re: Suspension setup?!, Joe Curry, 00:19
- Re: Shelby wheels "found", Joe Curry, 00:15