6pack (date)
March 31, 2004
- gear shift lever, Gary Fluke, 23:28
- RE:, Gary Fluke, 23:16
- TR6 intake and exhaust ports change in 72, Don Malling, 20:28
- Victoria British Clutch rebuild kit, Adam C Beasley, 18:30
- OD Wiring, Colin Thom, 16:45
- Distributorless Ignition System Project Report, Kendall Larsen, 15:16
- Re: Words of Warning (not strictly LBC), Jay Welch, 12:22
- Re: Words of Warning (not strictly LBC), Robert M. Lang, 10:46
- Re: Words of Warning (not strictly LBC), webb, 08:49
- Words of Warning (not strictly LBC), Kevin McNelis, 08:08
- Bonnet Alignment from Alex Manzo, Tommy Thompson, 07:42
- RE: Lost Cam, car frames and POR15, steve bridge, 06:12
- Re: bonnet alignment, Tommy Thompson, 00:16
March 30, 2004
- Re; Pilot Bushing, Sally or Dick Taylor, 23:37
- Re: Speedometer, Michael Corbitt, 23:21
- Re: bonnet alignment, Sally or Dick Taylor, 23:18
- Re: Carb Disassembly Question, Sally or Dick Taylor, 22:03
- RE:, Gary Fluke, 18:51
- RE: Lost Cam, Navarrette, Vance, 17:50
- RE: Man am I stumped, Rick, 17:38
- Re: Lost Cam, StuBeatty, 16:58
- RE: Lost Cam, Rick & Lori, 16:52
- RE: Embarrasssed CENTER CONSOLE BIDDER, Rick & Lori, 16:49
- Re: Lost Cam, StuBeatty, 16:42
- Lost Cam, StuBeatty, 16:11
- Re: Man am I stumped, Lumia, John, 13:59
- RE: top down, Shawn J. Loseke, 13:42
- Wiring a FIA battery cutoff switch, Chuck Arnold, 13:20
- Re: Embarrasssed CENTER CONSOLE BIDDER, trinitygadget, 12:51
- Roof Frame question, Steve Hanselman, 12:08
- top down, Drew Palavage, 11:48
- Panasport Update, R. Ashford Little II, 10:57
- RE: Starter Wiring, Gary Fluke, 10:19
- RE: Starter Wiring, Gary Fluke, 10:16
- Embarrasssed CENTER CONSOLE BIDDER, RedTriumphTr6, 10:13
- RE: Tuning TR6, Navarrette, Vance, 09:23
- RE: Starter Wiring, webb, 08:37
- Re: tr6 console, Robert M. Lang, 07:38
March 29, 2004
- RE: Starter Wiring, Gary Fluke, 23:53
- Re: Man am I stumped, Acekraut11, 22:01
- RE: Triumph Center Console for TR4A TR250 TR5 TR6, Mark Pruitt, 22:00
- RE: Choke, Adam C Beasley, 21:29
- Man am I stumped, airbear72, 20:39
- Choke, Adam C Beasley, 20:28
- Tuning TR6, Adam C Beasley, 20:03
- Water pump question, Adam C Beasley, 19:57
- Re: tr6 console, Acekraut11, 18:41
- tr6 console, Gene Holtzclaw, 18:35
- Triumph Center Console for TR4A TR250 TR5 TR6, Bill Moine, 18:29
- Timing Woes, Chris Lummis, 18:21
- re:Car will not start with new battery, Bruce Moxon, 17:12
- RE: #$@% Spring Fever, R. Ashford Little II, 15:49
- Re: New 74 TR Pics, Jay Snable, 14:49
- tranny problem solved, DaCRANEz, 13:59
- RE: #$@% Spring Fever, R. Ashford Little II, 13:57
- FW: New 74 TR Pics, Gary R., 13:52
- Speedometers, Billy and Ann Green, 13:22
- #$@% Spring Fever, R. Ashford Little II, 13:10
- RE: Tranny help, Navarrette, Vance, 12:54
- Re: New 74 TR Pics, Mickylong, 12:10
- New 74 TR Pics, Gary R., 11:32
- Oil leak, Navarrette, Vance, 08:49
- Starter Wiring, webb, 08:45
- Speedometer, Michael Corbitt, 08:29
- Tranny help, DaCRANEz, 08:05
March 28, 2004
- Carb rebuild, DaCRANEz, 20:07
- bonnet alignment, Lizirbydavis, 19:16
- Free used TR6 Gray centers with hub cap badges, Michael Greene, 18:07
- heating prob FIXED!, kmcnelis, 17:06
- Re: Heating probs, Acekraut11, 11:32
- Re: Heating probs, Irv Korey, 10:46
- Pilot bushing, Mickylong, 10:27
- Heating probs, kmcnelis, 10:25
- Carb Disassembly Question, Ken Davis, 09:38
- Re: Rocker Arm/Valve Adjustment, Robert M. Lang, 08:49
- Started engine for the 1st time, Dale, 06:40
March 27, 2004
- Transmission, Harmon, Mike, 19:47
- RE: Car will not start with new battery, Rick & Lori, 15:53
- Brake booster, Josh Tarnow, 15:08
- Re: Rocker Arm/Valve Adjustment, Sally or Dick Taylor, 13:27
- Car will not start with new battery, Bruce Moxon, 13:15
- Leaky Transmission, Todd Bermudez, 12:36
- RE: Rocker Arm/Valve Adjustment, Rick & Lori, 07:48
- RE: tail lights, Rick & Lori, 07:46
- Rocker Arm/Valve Adjustment, Mark Martin, 07:19
- Update on Flywheel Lightening, Darcy Hunter, 06:12
- Re: RE: tail lights, John Peacock, 05:40
- RE: copper washer, Jim Davis, 05:00
March 26, 2004
- Re: copper washer, Kai M. Radicke, 22:08
- copper washer, DaCRANEz, 21:38
- Re: tail lights, Acekraut11, 21:28
- Re:tail lights, oliver, 20:36
- RE: transmission & diff. gear oil, Rick & Lori, 16:05
- TR 250 Hubcaps For Sale, Sources, Prices ?, Robert P Waldrop, 13:36
- transmission & diff. gear oil, STEVE KIRSIS, 13:05
- Re: Exhaust, Sally or Dick Taylor, 12:30
- Re: Dixon Car Show & Sap Meet ( Northern California), TR6UO, 10:56
- Thanks everyone and another question :), Adam C Beasley, 10:53
- Re: (no subject), Acekraut11, 10:37
- Re: Exhaust, Gary Fluke, 10:18
- Re: Exhaust, genehart, 08:48
- Exhaust, Calvin Allen, 07:58
- Dixon Car Show & Sap Meet ( Northern California), Ken Davis, 07:12
- Re: Flywheel lightening, Greg Dito, 05:52
March 25, 2004
- RE: The good, the bad, and the ugly, Hugh Barber, 20:44
- Hub puller in NY Metro area, Brian Yarborough, 19:42
- RE: EVERBODY, Navarrette, Vance, 17:45
- EVERBODY, RazorBobSr, 17:24
- Re: The good, the bad, and the ugly, Mohawktriumphs, 13:25
- RE: The good, the bad, and the ugly, Shawn J. Loseke, 11:21
- The good, the bad, and the ugly, Navarrette, Vance, 09:33
- Joe's "Rattle" resolved, Lizirbydavis, 09:27
- RE: leak???, Adam C Beasley, 06:28
- Re: WAter pump brand, jonmac, 02:49
- Re: junk yard carbs, Sally or Dick Taylor, 00:25
- RE: leak???, Sally or Dick Taylor, 00:21
March 24, 2004
- Flywheel lightening, DaCRANEz, 22:19
- RE: Motor Probs, Chuck Arnold, 21:44
- RE: 6PACK magazine back issues, Mark Creamer, 20:20
- RE: leak???, Adam C Beasley, 20:19
- Re: Ready to start?, Greg Dito, 20:04
- Re: junk yard carbs, Ken Davis, 19:06
- RE: Removing the cork residue, Rick & Lori, 18:27
- junk yard carbs, Tom Duclos, 18:16
- Re: Ready to start?, Mitchel Seff, 18:15
- Removing the cork residue, R. Ashford Little II, 17:21
- Re: Flywheel lightening, Richard Seaton, 16:55
- RE: ID Plate Question, Navarrette, Vance, 15:29
- Re: Flywheel lightening, Greg Dito, 15:20
- ID Plate Question, Gene Hart, 15:01
- Re: Distributor Question, Ken Davis, 14:59
- Flywheel lightening, DaCRANEz, 14:20
- Re: Distributor Question, Sally or Dick Taylor, 12:23
- Re: Value Calculator, Sally or Dick Taylor, 12:09
- Re: Distributor Question, trinitygadget, 11:55
- re:everybody, Pappin,Ian, 11:42
- Distributor Question, Ken Davis, 11:20
- Re: Ready to start?, Terry Geiger, 11:05
- RE: EVERYBODY, Gary R., 10:09
- EVERYBODY, RazorBobSr, 09:17
- Re: Panasport Wheels, David Brady, 08:48
- Ready to start?, Navarrette, Vance, 08:16
- Re: Frame Question, Mitchel Seff, 04:33
- Re: Confused????, jonmac, 01:39
March 23, 2004
- Water Pump brand, Bruce Simms, 21:11
- Re: Frame Question, Mitchel Seff, 20:16
- RE: leak???, Adam C Beasley, 19:55
- Re: leak???, Acekraut11, 19:33
- RE: Confused?????, Hugh Barber, 19:26
- RE: leak???, Rick & Lori, 18:54
- Re: Still Confused,.., Sally or Dick Taylor, 18:49
- Stuck the TR250 back up on ebay-local sale fell through, John Peacock, 18:47
- leak???, Adam C Beasley, 18:26
- timing adjust, Lizirbydavis, 16:56
- Goodparts Aluminum Intakes, mahlmeister1, 16:35
- Re: Frame Question, Don Malling, 16:22
- Re: Panasport Wheels, David Brady, 13:14
- Re: value calculator, Sally or Dick Taylor, 12:46
- Re: Panasport Wheels, Robert M. Lang, 12:39
- RE: value calculator, Todd Bermudez, 12:37
- Panasport Wheels, David Brady, 12:30
- value calculator, Jim Jones, 11:22
- RE: Confused?????, Cris Hemingway, 11:13
- Re: RE: Frame Question, Greg Dito, 10:05
- Re: Still Comfused Old Buddys, trinitygadget, 09:49
- Re: RE: Confused?????, trinitygadget, 09:47
- Buying A TR-6, Mickcrerar, 09:28
- RE: Confused?????, Navarrette, Vance, 09:27
- RE: Frame Question, genehart, 09:26
- RE: Frame Question, Navarrette, Vance, 09:07
- Still Comfused Old Buddys, RazorBobSr, 09:03
- Confused?????, RazorBobSr, 07:55
- Re: Getting closer to the road, Sally or Dick Taylor, 00:48
- 6-PACK Newsletter, Sally or Dick Taylor, 00:18
March 22, 2004
- [TR250] Wheel Upgrade, David Brady, 21:55
- Re: Getting closer to the road, oliver, 21:24
- RE: Frame Question, Todd Bermudez, 21:07
- Frame Question, Adam C Beasley, 20:21
- O2 Sensors, Darcy Hunter, 19:39
- Getting closer to the road, Adam C Beasley, 19:34
- Re: Gas Mileage question, Ken Davis, 18:45
- Mystery plate - just curious, Mickylong, 16:43
- TR6 capping strip, Dale M Osterndorf, 15:04
- Joe's problem (was Chuck's), Lizirbydavis, 14:42
- RE: Chuck's problem?, Navarrette, Vance, 13:40
- Re: 6PACK magazine back issues, Sally or Dick Taylor, 13:14
- Re: Chuck's Problem?, Sally or Dick Taylor, 12:49
- Re: Chuck's problem?, trinitygadget, 12:46
- Chuck's problem?, Lizirbydavis, 11:43
- Re: Opinions on engine problem, Robert M. Lang, 10:28
- RE: Opinions on engine problem, Navarrette, Vance, 09:08
- Re: TR250 FS in Central Florida-needs lots of work, John Peacock, 00:12
March 21, 2004
- Re: TR6 front spoiler, Acekraut11, 21:14
- Re: My 'New' '73 TR6, oliver, 21:05
- TR6 front spoiler, Seth Glassman, 21:00
- Re: tires, Acekraut11, 20:54
- TR250 FS in Central Florida-needs lots of work, John Peacock, 20:49
- Re: My 'New' '73 TR6, Acekraut11, 20:49
- tires, oliver, 20:12
- My 'New' '73 TR6, Adam C Beasley, 19:27
- RE: Gas Mileage question, Robert Liam Gannon, 18:56
- Re: should've paid more attention during dissassembly, David Brady, 18:31
- RE: Gas Mileage question, steven groddy, 18:20
- Centering Steering Rack on Frame?, William Maslin, 17:49
- Flywheel Lightening, Darcy Hunter, 17:48
- Triumph manual., Bill Moine, 17:27
- re:gas mileage, Mohawktriumphs, 17:15
- RE: should've paid more attention during dissassembly, Jim Davis, 17:11
- RE: Gas Mileage question, Robert Fabie, 17:05
- Re: Gas Mileage question, Acekraut11, 16:58
- RE: Gas Mileage question, Jim Davis, 16:50
- Gas Mileage question, Ken Davis, 16:29
- 6PACK magazine back issues, KKSMC, 15:19
- 6PACK magazine back issues, KKSMC, 15:13
- should've paid more attention during dissassembly, David Brady, 14:05
- Saving Clutch and Brake Wear, Douglas Morris, 13:41
- Re: Opinions on engine problem, Chuck Arnold, 12:29
- Opinions on engine problem, Chuck Arnold, 11:58
- RE: u-joints -- Thank-you, Dale, 10:41
- Re: Center Console Available, RICHARD A HENDRICKSON, 08:52
- Morrning Gents, RazorBobSr, 08:51
- Re: Miata Seats in your '6, RICHARD A HENDRICKSON, 08:45
- Re: Center Console Available, SOThornton, 08:43
- Re: Center Console Available, cm.sherman, 08:04
- Looking for David Biggs, cm.sherman, 07:18
- RE: steel wheel torque number installation?, Jim Davis, 07:16
- Re: re. Subject: Center Console Available, Alan Salvatore, 06:42
- steel wheel torque number installation?, Michael Greene, 05:46
- Fw: Center Console Available, Andrew Packard, 02:55
- re. Subject: Center Console Available, Dave Waldorf, 00:50
March 20, 2004
- Re: One Week driving a 5 speed, Sally or Dick Taylor, 23:57
- Re: u-joints, DaCRANEz, 22:10
- RE: drive shaft vibrations and ujoints TR250 TR6, Gene Hart, 21:59
- RE: 1973 TR6 Heater Core & Fan, Rick, 21:05
- One Week driving a 5 speed, richard.r.olson, 18:03
- RE: drive shaft vibrations and ujoints TR250 TR6, jonmac, 17:28
- RE: TR6 Center Consoles, Robert Fabie, 16:37
- RE: TR6 Center Consoles, Rick & Lori, 16:30
- TR6 Center Consoles, Bob Fabie, 15:33
- Horton rear shock conversion Installation, jollycj, 15:32
- RE: u-joints -- Thank-you, Dave and Jodi Murray, 15:31
- u-joints, Dave and Jodi Murray, 09:47
- Re: drive shaft vibrations and ujoints TR250 TR6, Don Malling, 08:54
- RE: 1973 TR6 Heater Core & Fan, Jim Davis, 07:17
- Re: drive shaft vibrations and ujoints TR250 TR6, Don Malling, 07:13
- 1973 TR6 Heater Core & Fan, Daybell7, 06:39
- Center Console Available, Robert Fabie, 05:59
March 19, 2004
- RE: drive shaft vibrations and ujoints TR250 TR6, Hugh Barber, 22:08
- Please contact, Robert Liam Gannon, 18:05
- TR6 Seats, RICHARD A HENDRICKSON, 16:54
- RE: Weber three 40 DCOE Carbs unlimited/ Stromberg rebuild, R. Ashford Little II, 16:48
- FW: Weber three 40 DCOE Carbs unlimited/ Stromberg rebuild, Jim Davis, 15:54
- RE: TR6 capping strip, Jim Davis, 15:54
- Removal tool for TR250/early TR6 rostyle hubcaps, jonmac, 15:48
- Re: drive shaft vibrations and ujoints TR250 TR6, David Brady, 15:31
- Re: TR6 capping strip replacements, John Mitchell, 14:08
- PDWA leak, John Mitchell, 14:00
- drive shaft vibrations and ujoints TR250 TR6, Don Malling, 12:48
- RE: PDWA leak, Navarrette, Vance, 09:01
- TR6 capping strip, Dale M Osterndorf, 07:37
- RE: Weber three 40 DCOE Carbs unlimited/ Stromberg rebuild, R. Ashford Little II, 06:53
March 18, 2004
- Re: PDWA leak, Alan Salvatore, 21:51
- RE: Weber three 40 DCOE Carbs unlimited/ Stromberg rebuild, Hugh Barber, 21:41
- PDWA leak, John Mitchell, 19:52
- Weber three 40 DCOE Carbs unlimited/ Stromberg rebuild, Michael Greene, 19:11
- RE: Dirty !@*&#^%*@!!!, jonmac, 15:23
- Re: Dear Gents, Mark Riddle, 15:19
- Dear Gents, RazorBobSr, 14:32
- Removal tool for TR250/early TR6 rostyle hubcaps, Walter Fogle, 14:17
- Door noise, Dennis N Culligan, 14:13
- Re: Door Noise, Mickylong, 13:25
- Door Noise, Robert M Deutsche, 11:26
- Re: What needs to be done?, Adam Beasley, 07:16
March 17, 2004
- Massachusetts TR-6 owner, Richard and Tracy Lambour, 19:18
- Re: Rivit, or some tpye of connector on Hood Frame, Mitchel Seff, 17:57
- RE: TR6 Seat belt re-webbing, Jim Davis, 15:30
- Re: What needs to be done?, Kai M. Radicke, 15:24
- RE: Seat belts, Jim Davis, 14:40
- RE: Rivit, or some tpye of connector on Hood Frame, Jim Davis, 14:40
- RE: Rivit, or some tpye of connector on Hood Frame, Navarrette, Vance, 14:29
- Re: What needs to be done?, Philip E. Barnes, 13:53
- What needs to be done?, Adam Beasley, 13:26
- Rivit, or some tpye of connector on Hood Frame, genehart, 13:18
- RE: clutch fork pin?, Robert M. Lang, 13:15
- Wiring Diagrams, Prospero's Garage, 13:08
- Re: Fixing Leaky Freezeplugs (Fw: update: leaky mgb & coolant, Jay Welch, 13:07
- RE: Dirty !@*&#^%*@!!!, Navarrette, Vance, 12:34
- RE: clutch fork pin?, Ryan van Luchene, 11:54
- RE: clutch fork pin?, Sally or Dick Taylor, 11:46
- Re: Dirty !@*&#^%*@!!!, Greg Dito, 10:48
- Re: Dirty !@*&#^%*@!!!, mahlmeister1, 10:34
- Re: Dirty !@*&#^%*@!!!, Btp44, 10:21
- Fixing Leaky Freezeplugs (Fw: update: leaky mgb & coolant plug), Kai M. Radicke, 10:10
- Re: Dimensions of a 1973 TR6, Tommy Thompson, 09:47
- Dirty !@*&#^%*@!!!, Navarrette, Vance, 08:58
- Re: New to the list looking for a TR250 tub, John Peacock, 08:41
- Seat belts, jserignese, 08:29
- Dimensions of a 1973 TR6, Adam Beasley, 08:00
- Re: New to the list looking for a TR250 tub, James Franks, 07:41
- Re: New to the list looking for a TR250 tub, Greg Dito, 07:19
- digest delivery?, Walt Philipson, 06:19
March 16, 2004
- Re: New to the list looking for a TR250 tub, John Peacock, 21:33
- Re: New to the list looking for a TR250 tub, John Peacock, 21:32
- Re: Clutch Fork Pin, Kai M. Radicke, 21:08
- Test, Robert Liam Gannon, 18:40
- Re: Newcomer to North Carolina, Alan Salvatore, 18:07
- RE: re-chroming bumpers, Gene Hart, 17:24
- RE: clutch fork pin?, Rick & Lori, 17:20
- re-chroming bumpers, Brian Yarborough, 17:14
- Newcomer to North Carolina, James Henningsen, 16:54
- New to the list looking for a TR250 tub, John Peacock, 15:11
- Re: Clutch Fork Pin, Sally or Dick Taylor, 15:02
- RE: clutch fork pin?, Navarrette, Vance, 12:23
- RE: Cool option, Navarrette, Vance, 12:13
- New Orleans show, Harold M. Morton, 12:09
- clutch fork pin?, Ryan van Luchene, 11:59
- Keeping things original, Jsut4fun, 11:16
- Re: Cool option, John Peacock, 10:23
- Re: OD cable routing, Ken Davis, 09:02
- Cool option, R. Ashford Little II, 07:22
- Central MO help, mahutchinson, 06:30
- TR6's on ebay, Walt Philipson, 06:05
March 15, 2004
- Re: VB Catalog, Kai M. Radicke, 19:38
- VB Catalog, Acekraut11, 18:57
- a new TR philosophy - not LBC, Jim Jones, 17:41
- Re: Aluminum rims - nonLBC, RICHARD A HENDRICKSON, 16:58
- Brake master cylinder, Peter Macholdt, 12:40
- TVR / TR6 Red Engine Fan, Kai M. Radicke, 12:01
- RE: TR6 seat belts, Navarrette, Vance, 11:01
- RE: Tranny on 74, Navarrette, Vance, 10:58
- OD cable routing, Navarrette, Vance, 10:42
- Re: Rear Brake Hoses, William Maslin, 07:48
- Re: Cam bearings, Mitchel Seff, 05:01
- 2004 Michigan British Reliability Run, jonmac, 02:23
March 14, 2004
- Rear Brake Hoses, John Mitchell, 20:29
- Re: Cam bearings, Don Malling, 18:06
- 2004 Michigan British Reliability Run, Blake J. Discher, 17:13
- RE: Goodmorrning Gents, Robert Fabie, 16:53
- RE: Cam bearings, Jim Davis, 16:50
- Rear Bumper Part Question, Robert Fabie, 16:44
- Cam bearings, Terry Geiger, 16:03
- RE: Master Cylinder, William Maslin, 11:21
- Re: Rear Brake Hoses, William Maslin, 11:12
- RE: Master Cylinder, Rick & Lori, 10:11
- rally, Ralph Steinberg, 10:07
- Tranny on 74, RazorBobSr, 10:02
- Goodmorrning Gents, RazorBobSr, 08:56
- Re: TR6 seat belts, jonmac, 06:09
- RE: Master Cylinder, Gary Fluke, 00:07
March 13, 2004
- Rear Brake Hoses, John Mitchell, 21:23
- Re: Master Cylinder, Btp44, 19:59
- RE: my tale of TR6 woe (really long), Gary Fluke, 18:35
- Master Cylinder, Gary Fluke, 18:29
- Surrey Top On EBay-Sold Already, Todd Bermudez, 07:22
- Surrey Top On EBay, Todd Bermudez, 06:26
March 12, 2004
- Re: TR6 Diff repair & template attached, Brian Yarborough, 17:05
- my tale of TR6 woe (really long), Lizirbydavis, 15:20
- RE: TR6 Seat Belts, Jim Davis, 12:50
- short/long tail Crankshaft and Flywheel, David Brady, 12:22
- thanks guys, Ryan van Luchene, 11:55
- TR250/GT6 Crankshaft, David Brady, 11:20
- Thank You, Robert M Deutsche, 10:45
- Re: flywheel balance, contact request, Greg Dito, 10:41
- Wiring diagram and istanlation question, genehart, 10:26
- flywheel balance, contact request, David Brady, 10:22
- Re: Gauge repair, Thanks, RICHARD A HENDRICKSON, 09:35
- Gauge repair, Thanks, Mitchel Seff, 04:36
- Re: timing cover, Greg Dito, 03:12
March 11, 2004
- Re: Gauge Repair, bernd, 20:55
- Re: Diff. crack (Bummer!), Acekraut11, 19:01
- Diff. crack (Bummer!), Brian Yarborough, 17:16
- timing cover, mcgarry, 17:08
- Gauge Repair, Mitchel Seff, 17:08
- Re: Buffer Recommendations?, Walt Boeninger, 15:34
- Re: Seat Belts /visors, Bob, 14:00
- smokin', Ryan van Luchene, 11:58
- Re: POR-15 and Eastwood Rust encapsulator products -- Chassis, Paul G. Edelstein, 10:49
- test, Pappin,Ian, 10:12
- Seat Belts /visors, jserignese, 08:54
- Re: TR6 oversized seals-answer, bernd, 08:40
- Re: Buffer Recommendations?, CLIFF DAVIES, 08:37
- RE: Buffer Recommendations?, R. Ashford Little II, 08:19
- RE: Buffer Recommendations?, Kronberg, Peter, 08:07
- Ammeters, jonmac, 08:07
- Re: Buffer Recommendations?, Mickylong, 07:46
- Re: TR6 oversized seals-answer, webb, 07:23
- Buffer Recommendations?, William Maslin, 07:17
- Re: TR6 oversized seals-answer, Don Malling, 02:55
- Forwarded: Carlisle Import Show - Anyone been?, lists, 02:40
March 10, 2004
- Re: Introduction & A Question, Richard Seaton, 16:57
- Introduction & A Question, Robert M Deutsche, 14:15
- Re: TR6 oversized seals-answer, bernd, 12:55
- POR-15 and Eastwood Rust encapsulator products -- Chassis Coat, Don Malling, 11:16
- Re: TR6 oversized seals-answer, bernd, 10:39
- Re: Amp gauge, Lizirbydavis, 10:13
- Re: Re: Amp gauge, trinitygadget, 09:40
- Re: Amp gauge, Robert M. Lang, 09:11
- Amp gauge, Jim, 05:54
March 09, 2004
- Smiley 6, Kendall Larsen, 23:06
- RE: Seat belts /visors, Jim Davis, 17:30
- Re: OT, but funny nonetheless, Mickylong, 13:24
- Spin-On Oil Filter Adaptor - Update, webb, 13:16
- OT, but funny nonetheless, R. Ashford Little II, 13:11
- Carpet sets from Euroclassictrim, Colin Traquair, 06:16
- RE: Seat belts /visors, Walt Philipson, 06:04
- Re: Spin on filter adaptor leaks, jonmac, 01:28
- Forwarded: #@%&@#& gearbox!, lists, 00:11
March 08, 2004
- TR IRS diff mount reinforcing, Mark J. Bradakis, 23:57
- RE: TR6 Wheel / Rim Silver Paint, Rick, 19:45
- Thanks to the list!, Grant Kester, 18:50
- RE: Seat belts /visors, Jim Davis, 17:41
- Re: Electrical Conundrum, Mark J. Bradakis, 14:49
- Re: Spin-on oil filter adaptor, webb, 14:39
- Re: Speedo cable and EGR Counter, Terry Geiger, 14:31
- Re: Spin-on oil filter adaptor, Mark Bullard, 14:18
- Re: Spin-on oil filter adaptor, Peter Macholdt, 14:17
- Spin-on oil filter adaptor, STEVE KIRSIS, 14:12
- Spin-on oil filter adaptor, webb, 13:42
- Re: Electrical Conundrum, Acekraut11, 13:19
- Electrical Conundrum, Grant Kester, 13:04
- RE: Rodents eating wiring, Kendall Larsen, 12:45
- Re: Rodents eating wiring, mitch vamos, 12:18
- Re: Rodents eating wiring, TR6UO, 11:52
- Re: Rodents eating wiring, Robert M. Lang, 10:24
- Seat belts /visors, jserignese, 10:16
- RE: TR6 Wheel / Rim Silver Paint, Navarrette, Vance, 08:57
- RE: Bleeding Systems, R. Ashford Little II, 08:26
- FOR ANYONE, RazorBobSr, 05:26
- Re: Rodents eating wiring, mitch vamos, 00:55
March 07, 2004
- Re: Rodents eating wiring, Acekraut11, 22:30
- convertible top latch hardware, Michael Greene, 20:13
- brake master cylinder, bernd, 19:44
- RE: convertible top latch hardware Victoria cat. scan image, Jim Davis, 17:51
- convertible top latch hardware Victoria cat. scan image, Michael Greene, 17:23
- RE: TR6 Wheel / Rim Silver Paint, Rick, 15:53
- Re: Headers, Kai M. Radicke, 11:33
- Headers, Brian Yarborough, 09:51
- RE: Rodents eating wiring, Saul W. Adelman, 09:33
- Re: Rodents eating wiring, RICHARD A HENDRICKSON, 09:02
- wiring damage, DaCRANEz, 08:34
- wheel paint, DaCRANEz, 08:21
- RE: Rodents eating wiring, steve bridge, 08:14
- Rodents eating wiring, Saul W. Adelman, 07:48
- Fumes Update, Robert L. Gannon, 07:15
- Re: lower sill paint, John Mitchell, 06:48
- Re: lower sill paint, Mitchel Seff, 06:46
- lower sill paint, Lizirbydavis, 06:20
March 06, 2004
- RE: Threads for brake pipes, Hugh Barber, 23:25
- RE: Now they tell me..., Mark Pruitt, 21:54
- Threads for brake pipes, Peter Macholdt, 21:53
- Now they tell me..., Douglas Morris, 20:32
- FW: AIR COMPRESSOR LITIGATION WEBSITE,Campell Hausfield,, Hugh Barber, 19:50
- throttle adjust, Lizirbydavis, 18:22
- Re: Painting, Sally or Dick Taylor, 17:56
- Clarification on boxing rear diff bridge, Cregg Cowan, 17:04
- Exhaust Fume discussion, michael lunsford, 16:31
- Painting, JRURHH, 14:18
- Re: throttle adjust, Sally or Dick Taylor, 13:13
- Re: Slave Rebuild Kit, Sally or Dick Taylor, 13:08
- RE: TR6 Wheel / Rim Silver Paint, Gary R., 10:29
- TR6 Wheel / Rim Silver Paint, Ronniepalmisano, 10:03
- Re: Tire poll follow-up question, Mitchel Seff, 09:37
- TR6 TIRE HELP, Michael Greene, 07:53
- RE: Windshield Seal Repair Parts List, Rick & Lori, 07:17
- Slave Rebuild Kit, Drswitala, 06:40
- throttle adjust, Lizirbydavis, 06:17
March 05, 2004
- RE: J type OD Identification, Peter Zaborski, 19:25
- windshield, DaCRANEz, 19:01
- Re: Windshield Seal Repair Parts List, Sally or Dick Taylor, 18:59
- Re: Fumes Update, Robert L. Gannon, 17:44
- Re: Windshield Seal Repair Parts List, Mitchel Seff, 17:35
- Re: Fumes, Robert L. Gannon, 16:39
- J type OD Identification, jdhenn@cfl.rr.com, 12:04
- Petrol injection pix, jonmac, 11:31
- Re: Fumes, Walt Philipson, 11:19
- Re: Windshield Seal Repair Parts List, genehart, 10:32
- Re: Windshield Seal Repair Parts List, Peter Macholdt, 10:18
- Re: Windshield Seal Repair Parts List, genehart, 10:04
- RE: Tire poll follow-up question, R. Ashford Little II, 09:37
- Re: Windshield Seal Repair Parts List, Acekraut11, 09:23
- Re: Windshield Seal Repair Parts List, genehart, 09:06
- RE: Fumes, Navarrette, Vance, 08:54
- Pictures of Shroud and Wiper Motor Cover, Mark Pruitt, 08:45
- Re: Fumes, Terry Geiger, 06:52
- RE: Tire poll, R. Ashford Little II, 05:42
March 04, 2004
- Re: Stromberg Rebuilder, LaJoMor, 20:44
- Windshield Seal Repair Parts List, Acekraut11, 20:38
- RE: Tire poll, R. Ashford Little II, 20:18
- Fumes, Robert L. Gannon, 20:12
- RE: Lucas alternator refurb?, Mark Creamer, 20:12
- Re: radiator shroud, bratt, 20:01
- RE: radiator shroud, Mark Pruitt, 19:55
- RE: Tire poll, Shawn J. Loseke, 19:54
- RE: Tire poll, R. Ashford Little II, 19:45
- RE: radiator shroud, Rick & Lori, 19:25
- Re: radiator shroud, Alan Salvatore, 19:24
- radiator shtoud, STEVE KIRSIS, 19:14
- Re: radiator shroud, Kai M. Radicke, 18:48
- RE: Tire poll, Rick & Lori, 18:43
- Re: radiator shroud, Peter Macholdt, 18:39
- RE: Tire poll, Navarrette, Vance, 18:27
- RE: Stromberg Rebuilder, Timothy Holbrook, 18:25
- RE: Tire poll, Timothy Holbrook, 18:24
- radiator shroud, STEVE KIRSIS, 18:21
- Re: Tire poll, Kai M. Radicke, 18:03
- RE: Tire poll, R. Ashford Little II, 16:50
- RE: Tire poll, R. Ashford Little II, 14:59
- RE: Tire poll, Navarrette, Vance, 14:55
- Re: Tire poll, Robert M. Lang, 14:51
- RE: Stromberg Rebuilder, R. Ashford Little II, 14:20
- Tire poll, R. Ashford Little II, 14:14
- Stromberg Rebuilder, Richard Paquette, 13:16
- Diff and mount repairs in western Mass?, Kronberg, Peter, 08:56
- Re: window channel seals, Alan Salvatore, 07:59
- Re: window channel seals, Acekraut11, 06:57
- window channel seals, Walt Philipson, 06:40
- RE: List, Gary R., 05:49
- fork pin, DaCRANEz, 00:00
March 03, 2004
- Re: engine rebuild, +, Sally or Dick Taylor, 23:48
- (no subject), DaCRANEz, 23:44
- engine rebuild, DaCRANEz, 23:06
- List, Kevin Andrews, 22:46
- Lucas alternator refurb?, Kronberg, Peter, 12:16
- Mating British car parts, redux, Navarrette, Vance, 10:58
- Re: Re: Flywheel retainers?, Robert M. Lang, 10:03
- Re: Re: Flywheel retainers?, trinitygadget, 08:53
- RE: Washer Bottle Bracket, Gary R., 07:59
- Thermostatic vacum switch, michael lunsford, 07:19
- Re: TRF Summer Party CD, Robert M. Lang, 07:06
- Re: Flywheel retainers?, Robert M. Lang, 06:59
- Re: Flywheel retainers?, Mitchel Seff, 04:38
March 02, 2004
- TRF Summer Party CD, MJSUKEY, 20:12
- Flywheel retainers?, richard.r.olson, 19:01
- Re: Nitrous Oxide, Mitchel Seff, 18:00
- Re: Thermostatic Vacuum Switch, Douglas Morris, 17:33
- RE: Washer Bottle Bracket, andylit@covad.net, 16:43
- Re: falcon exhaust, RICHARD A HENDRICKSON, 16:02
- Re: falcon exhaust, Alan Salvatore, 15:21
- Brake Master Cap, Mark Bullard, 14:50
- Washer Bottle Bracket, Gary R., 13:41
- RE: Thermostatic Vacuum Switch, Steve Hanselman, 13:32
- Re: Thermostatic Vacuum Switch, Sally or Dick Taylor, 13:03
- RE: falcon exhaust, Navarrette, Vance, 11:57
- Re: TR6 on Ebay, jonmac, 11:11
- falcon exhaust, Lizirbydavis, 11:02
- RE: Nitrous Oxide, Navarrette, Vance, 10:36
- Re: Mating British Car parts..., Jay Welch, 08:50
- Re: Barrett-Jackson auction thoughts, genehart, 08:39
- Re: Barrett-Jackson auction thoughts, Robert M. Lang, 07:33
- Re: Oil temp gauge, Irv Korey, 05:23
March 01, 2004
- Re: Man am I stumped, Mark Bullard, 23:50
- Re: Nitrous Oxide, MJSUKEY, 20:13
- Center Console on Ebay, Mark Bullard, 18:51
- Re: Mating British Car parts..., Don Malling, 18:21
- Barrett-Jackson auction thoughts, Navarrette, Vance, 17:54
- Re: Mating British Car parts..., Mitchel Seff, 17:36
- Re: TR6 on Ebay, Richard Seaton, 15:58
- Re: Mating British Car parts..., Kai M. Radicke, 15:51
- Re: TR6 on Ebay, Robert M. Lang, 15:46
- Re: TR6 on Ebay, Chip19474, 15:24
- RE: Mating British Car parts..., Robert M. Lang, 15:11
- RE: Oil temp gauge, Robert M. Lang, 15:08
- Thermostatic Vacuum Switch, Douglas Morris, 14:46
- Re: Mating British Car parts..., Peter Macholdt, 14:26
- RE: Mating British Car parts..., Todd Bermudez, 13:42
- Re: Mating British Car parts..., Sally or Dick Taylor, 13:07
- Re: FW: TR6 on Ebay, Mickylong, 12:55
- Re: FW: TR6 on Ebay, YeOldEd, 12:19
- RE: Oil temp gauge, Navarrette, Vance, 11:41
- Re: FW: TR6 on Ebay, Walt Boeninger, 11:32
- RE: Port Matching, Navarrette, Vance, 11:28
- Re: Bleeding Systems, Walt Boeninger, 11:23
- Re: FW: TR6 on Ebay, Robert M. Lang, 11:18
- RE: FW: TR6 on Ebay, Navarrette, Vance, 11:05
- Re: FW: TR6 on Ebay, LaJoMor, 10:53
- FW: TR6 on Ebay, Navarrette, Vance, 10:37
- Oil temp gauge, Jim, 10:22
- Re: Port Matching, Robert M. Lang, 10:21
- RE: Head work, Navarrette, Vance, 10:10
- Mating British Car parts..., Navarrette, Vance, 09:22
- RE: Head work, Navarrette, Vance, 08:45
- TR6 on Ebay, R. Ashford Little II, 08:35
- Re: Raising Compression, Robert M. Lang, 08:16