I just had the same problem. I picked up a used valve and ordered o-rings
from Moss.
I haven't installed it yet because i forgot to order some rubber grease,
although I don't know how necessary it is.
Good directions are on the buckeye triumph web site.
al salvatore
76tr6
----- Original Message -----
From: "John Mitchell" <jmitch@snet.net>
To: "6-Pack" <6pack@autox.team.net>; <triumphs@autox.team.net>
Sent: Thursday, March 18, 2004 9:52 PM
Subject: PDWA leak
> Hi everyone, I just finished rebuilding front and rear brakes and
> replaced all hoses. After bleeding, I'm getting a leak up though the
> brake switch on the PDWA. It feels as though the piston is centered and
> the fluid is only coming from the rear brake(smaller) portion of the
> master cylinder. Im soo glad I switched to silicone fluid! Would this
> be an "O" ring problem or something else? It didn't leak before the
> rebuild, but at that time the cylinder wasn't centered either. Any
> ideas would be greatly appreciated. TIA
> John Mitchell 76TR6
|