Could someone with a TVR 2500M (assuming no engine conversions and that you
still have the Triumph 6 in place) confirm that the 2500M fan blade is 12.5
inches in diameter?
The TR6 red fan is about 14.5" inches in diameter. The fans are the exact
same except for the length of the blades, the inner circumference of the
base circle is the same.
Now, if this is the case, is there any reason TVR would lop off 2 inches
from the overall diameter? Are there bonnet clearance issues with the slope
of the TVR front end?
Thanks,
Kai
--
Kai M. Radicke
Wishbone Classics
www.wbclassics.com
|