6pack (date)
October 31, 2003
- Re: TR6 Radiators, Sally or Dick Taylor, 21:03
- Re: New List Member, Mark J. Bradakis, 20:54
- Re: SPEEDO TR-6 74, Alan Salvatore, 19:54
- Re; Rear toe, +, Sally or Dick Taylor, 19:48
- Re: Stuck Parking Brake, Sally or Dick Taylor, 19:29
- Re: Rear Tow in, out? pinion seal, Richard Seaton, 19:18
- Re: Pics needed of Saffron TR6 w/ Hardtop, Don Malling, 18:32
- Stuck Parking Brake, John Mitchell, 18:04
- In case anyone's bored...?, jonmac, 17:58
- Rear Tow in, out?, mocharand5, 17:13
- New List Member, mocharand5, 16:37
- TR6 radiators, Ann and Billy Green, 16:19
- RE: Pics needed of Saffron TR6 w/ Hardtop, Jim Davis, 15:25
- Half Shaft Problems, Nick Gemas, 15:18
- re: Gear Oil GL-3/4 Question, Jon, 13:46
- Gear Oil GL-3/4 Question, Jon, 12:56
- Re: Cam regrinding, Robert M. Lang, 12:14
- Cam regrinding, Lizirbydavis, 11:28
- Air compressor follow-up, jserignese, 10:40
- Re: SPEEDO TR-6 74, Greg Dito, 10:40
- Re: Cam Regrinding, Greg Dito, 10:29
- SPEEDO TR-6 74, RazorBobSr, 10:07
- Cam Regrinding, Douglas Morris, 09:44
- Re: Re: underhood heat, Greg Dito, 08:39
- Re: underhood heat, Greg Dito, 08:09
- KYB SHocks, Gary R., 07:43
- underhood heat, Lizirbydavis, 06:30
- Re: Air Compressor, BigOldWumper, 00:11
- Re:Aaaaarrrrgh!, Sally or Dick Taylor, 00:08
October 30, 2003
- Aaaaarrrrrgh!, Navarrette, Vance, 21:22
- Re: Re: TR6 Front Shock, Greg Dito, 20:51
- Re: Removing u-joints, Greg Dito, 20:45
- speedo cables, Alan Salvatore, 20:29
- TRF, RICHARD A HENDRICKSON, 19:38
- Removing u-joints, John North, 19:36
- RE: Re: TR6 Front Shock, Gary R., 19:29
- RE: TR6 Front Shock, Gary R., 19:23
- Re: Seat reupholstery kit recommendations, Mickylong, 18:39
- RE: Pics needed of Saffron TR6 w/ Hardtop, Navarrette, Vance, 18:32
- Drive Shaft, Douglas Morris, 18:18
- Seat reupholstery kit recommendations, TR6 Triumph, 17:07
- Re: TR6 Front Shock with spring compressor photos., Richard Seaton, 16:58
- Re: Pics needed of Saffron TR6 w/ Hardtop, CP25616, 14:52
- Re: Flat towing a TR6, Mark J. Bradakis, 14:52
- Flat towing a TR6, Seth Glassman, 14:36
- Pics needed of Saffron TR6 w/ Hardtop, Kai M. Radicke, 14:30
- Re: Re: TR6 Front Shock, Greg Dito, 13:42
- RE: TR6 Front Shock, JDombey, 10:43
- Re: TR6 Front Shock, Dale, 10:32
- Re: Air Compressor, william mcintire, 07:06
October 29, 2003
- Re: Air Compressor, ShewFamily, 22:22
- right angle drive for speedo cable, Alan Salvatore, 21:04
- Re: Air Compressor, Mark Bullard, 18:28
- Re: Securon Seat Belt Installation, YeOldEd, 18:27
- Re: Securon Seat Belt Installation, Alan Salvatore, 18:22
- Re: Power Brake booster diaphragm, Hugh McAleer, 18:12
- Air Compressor, jserignese, 15:13
- Re: Re: A hardy thank you to those that endulged my 48 hour, Greg Dito, 14:57
- Re: Urethane bushing question, Robert M. Lang, 12:47
- Re: A hardy thank you to those that endulged my 48 hour whine., Theodore R. Stevens, 12:34
- RE: VTR Hillclimb, Robert M. Lang, 12:22
- RE: VTR Hillclimb, R. Ashford Little II, 11:59
- Re: GARAGEMAHALL?, Todd Bermudez, 11:16
- Re: Urethane bushing question, Greg Dito, 10:38
- Re: Urethane bushing question, LaJoMor, 10:32
- Securon Seat Belt Installation, Bruce Simms, 10:03
- Urethane bushing question, Gary R., 09:19
- Re: TR6 Front Shock, Acekraut11, 09:02
- Re: RE: TR6 Front Shock, Greg Dito, 08:50
- A hardy thank you to those that endulged my 48 hour whine., S Mann, 08:03
- Re: GARAGEMAHALL?, Skip Montanaro, 07:55
- VTR Hillclimb, R. Ashford Little II, 07:42
- RE: TR6 Front Shock, R. Ashford Little II, 07:37
- Re: QUESTION TO ALL MATH INCLINED GEAR HEADS, Terry Geiger, 07:10
- Re: rear sway bars, webb, 06:27
- What happened to Cross Roads Auto Systems?, Rex Townsend, 00:06
October 28, 2003
- Test/delete, Chris De Wet, 23:15
- Re: QUESTION TO ALL MATH INCLINED GEAR HEADS, Greg Dito, 22:19
- Re: QUESTION TO ALL MATH INCLINED GEAR HEADS, Gary Fluke, 21:52
- QUESTION TO ALL MATH INCLINED GEAR HEADS, RazorBobSr, 21:09
- TR6 Front Shock, Chris & Melissa, 20:21
- Re: rear sway bars, MJSUKEY, 20:13
- Re: rear sway bars, Lizirbydavis, 19:15
- Dash Veneer, Acekraut11, 18:44
- Re: GARAGEMAHALL?, LaJoMor, 16:34
- GARAGEMAHALL?, R. Ashford Little II, 16:12
- re:alternators, Harry Hart, 09:58
- Re: The Seats Have to COME OUT?, william mcintire, 07:45
- RE: The Seats Have to COME OUT?, Jay Welch, 07:29
- Power Brake booster diaphragm, michael lunsford, 07:29
- Engine Performance Recommendations, jdhenn, 06:23
- RE: The Seats Have to COME OUT?, william.mcintire, 05:34
October 27, 2003
- Re: rear sway bars, Lizirbydavis, 20:25
- Re: The Seats Have to COME OUT?, David Friedlander, 18:44
- Re: The Seats Have to COME OUT?, Sally or Dick Taylor, 17:14
- Re: Diaphragm for Power booster, David Friedlander, 15:31
- Re: Offbrand Brake M/C, steve bridge, 15:04
- 1975 TR6 For Sale, dl, 13:21
- Roller Rocker Results, Terry Geiger, 12:56
- Re: The Seats Have to COME OUT?, Todd Bermudez, 11:48
- The Seats Have to COME OUT?, ShewFamily, 11:30
- The Seats Have to COME OUT?, S Mann, 10:55
- Offbrand Brake M/C, john davis, 10:42
- Re: Diaphragm for Power booster, orthen, 10:11
- Re: Fan belt TR6, orthen, 10:10
- RE: Adjusting rear camber on a 250, Navarrette, Vance, 09:12
- Re: Adhesive for Fuzzy Door Seal, william mcintire, 06:55
- Diaphragm for Power booster, michael lunsford, 06:30
- Fan belt TR6, Tarnow, Joshua, 05:59
- Re: How stuff works --> Differentials, Don Malling, 05:43
- Re: Adjusting rear camber on a 250, Sally or Dick Taylor, 00:39
October 26, 2003
- Re: How stuff works --> Differentials, Gary Fluke, 22:54
- Re: Help: A little guidance from the pro's, Mark J. Bradakis, 20:10
- Re: Adhesive for Fuzzy Door Seal, Mark Pruitt, 19:38
- Motor Tear down, Navarrette, Vance, 19:32
- Adhesive for Fuzzy Door Seal, John Mitchell, 19:23
- Adjusting rear camber on a 250, Peter Macholdt, 13:14
- Re: Suspension Rebuild Opinions Wanted, Timothy Holbrook, 11:06
- How stuff works --> Differentials, Don Malling, 10:52
- Re: Garage Space?, LaJoMor, 10:17
- Garage Space?, R. Ashford Little II, 08:51
- Re: Finally!, GSFuqua1, 08:23
- RE:Finally!, Dennis N Culligan, 07:13
October 25, 2003
- Re: Stromberg Needles, Sally or Dick Taylor, 21:33
- Stromberg Needles, Nick Gemas, 20:13
- Please check this out..., Joseph Grant, 20:07
- All Fads come back in style, Richard Seaton, 19:57
- Re: Barke master cylinder - Opinions wanted, Marc Girardin, 19:40
- missing, Alan Salvatore, 19:32
- RE: rear sway bars, Hugh Barber, 18:16
- vtr2003 results, Lizirbydavis, 17:41
- RE: rear sway bars, william.mcintire, 17:01
- RE: Suspension Rebuild Opinions Wanted Addition, Shawn J. Loseke, 14:53
- RE: rear sway bars, Shawn J. Loseke, 14:44
- Re: Suspension Rebuild Opinions Wanted Addition, LaJoMor, 14:36
- Re: rear sway bars, Sally or Dick Taylor, 13:41
- RE: Suspension Rebuild Opinions Wanted, Sally or Dick Taylor, 13:31
- RE: Barke master cylinder - Opinions wanted, Sally or Dick Taylor, 13:15
- Re: Emission line filter, Sally or Dick Taylor, 13:05
- Re: Suspension Rebuild Opinions Wanted, Greg Dito, 12:56
- rear sway bars, Lizirbydavis, 12:36
- Re: as if it's not obvious, YeOldEd, 12:12
- RE: as if it's not obvious, Jim Davis, 11:58
- RE: Emission line filter, Shawn J. Loseke, 10:29
- RE: Emission line filter, Gary R., 09:19
- RE: Selling my TR-250, Paul G. Edelstein, 08:50
- Emission line filter, Drswitala, 08:31
- RE: Location of Badge on Front Fenders, Jim Davis, 07:55
- RE: Barke master cylinder - Opinions wanted, william.mcintire, 07:15
- RE: Suspension Rebuild Opinions Wanted, Joseph Grant, 07:11
- missing, RICHARD A HENDRICKSON, 03:02
- Re: Barke master cylinder - Opinions wanted, Sally or Dick Taylor, 00:28
October 24, 2003
- Re: Barke master cylinder - Opinions wanted, Acekraut11, 22:34
- Re: Engine storage, Mark Riddle, 20:59
- Shipwright's disease, Neil Wehmeyer, 19:59
- Barke master cylinder - Opinions wanted, Marc Girardin, 18:20
- RE: Finally!, Hugh Barber, 16:27
- Overdrive, Robert L. Gannon, 16:13
- Re: Help: A little guidance from the pro's, Sally or Dick Taylor, 15:51
- Re: Finally!, David Friedlander, 15:46
- Re: Suspension Rebuild Opinions Wanted, Sally or Dick Taylor, 15:43
- Re: Suspension Rebuild Opinions Wanted, LaJoMor, 15:35
- Re: Silicone Rocker Cover Gasket, Sally or Dick Taylor, 15:25
- speedo cable, Alan Salvatore, 14:15
- RE: Selling my TR-250, Skip Montanaro, 13:56
- Re: Suspension Rebuild Opinions Wanted, Greg Dito, 13:50
- speedometer gear in transmission, Alan Salvatore, 13:39
- RE: TR6 - Model Cars, Todd Bermudez, 12:22
- Re: TR6 - Model Cars, Mark Bullard, 11:44
- RE: TR6 - Model Cars, WenAl Hart, 11:25
- RE: TR6 - Model Cars, Navarrette, Vance, 11:23
- TR6 - Model Cars, Michael Corbitt, 10:58
- Suspension Rebuild Opinions Wanted, Gary R., 10:50
- Silicone Rocker Cover Gasket, bosborn, 10:38
- Location of Badge on Front Fenders, ShewFamily, 10:30
- Re: TR250 Power, LaJoMor, 09:28
- RE: Refinish Dash, Navarrette, Vance, 09:18
- Re: TR250 Power, Don Malling, 09:02
- Help: A little guidance from the pro's, S Mann, 08:37
- Finally!, ShewFamily, 06:04
October 23, 2003
- Re: Finally!, GSFuqua1, 23:39
- RE: Finally!, Hugh Barber, 22:03
- Re: VIN on Windshield post, DANMAS, 21:01
- Re: Finally!, Alan Salvatore, 20:51
- Refinish Dash, John North, 20:46
- Springs, Opntop, 20:14
- Windshield VIN, Douglas R. Schirripa, 20:12
- Finally!, David Friedlander, 19:30
- Re: Differential Drain Plug, steve bridge, 19:16
- Engine storage, john davis, 19:12
- Re: VIN on Windshield post, Hugh McAleer, 19:00
- Re: VIN on Windshield post - replacement?, DANMAS, 17:20
- as if it's not obvious, R. Ashford Little II, 17:01
- Re: Selling my TR-250, Skip Montanaro, 14:45
- received my roller rockers!, Erik Quackenbush, 14:40
- Re: VIN on Windshield post - replacement?, Theodore R. Stevens, 05:15
- Re: Powder Coating Top Frame, GSFuqua1, 01:56
October 22, 2003
- Re: VIN on Windshield post, Gary Fluke, 21:34
- LBCography, Douglas Morris, 21:24
- VIN on Windshield post, Michael Kutka, 20:07
- Re: Differential Drain Plug, Neil Wehmeyer, 17:38
- Re: Differential Drain Plug, David Friedlander, 16:16
- Re: Selling my TR-250, Skip Montanaro, 15:18
- test - ignore, bosborn, 13:03
- Re: Bosch Alternator, Mark Bullard, 12:40
- Commission number question, Brian Borgstede, 12:17
- Commission number question, Hugh McAleer, 11:15
- RE: Intake manifold studs missing, Walt Philipson, 10:34
- Intake manifold studs missing, Walt Philipson, 09:28
October 21, 2003
- 5 Sp Conversion link- 1 more, Greg Dito, 21:06
- RE: 5 speed conversion, Darrell Ramsey, 20:25
- Thanks, Neil Wehmeyer, 19:59
- RE: Differential Drain Plug, Hugh Barber, 19:54
- Re: Differential Drain Plug, David Friedlander, 19:10
- RE: Differential Drain Plug, Hugh Barber, 18:48
- Bosch Alternator, StuBeatty, 18:17
- Powder Coating Top Frame, John Mitchell, 18:04
- Differential Drain Plug, David Friedlander, 17:50
- Re: New Valves, Richard Good, 17:10
- Electrical Upgrades, Richard Seaton, 16:10
- RE: Oil Filters & Seat Belts, Walt Philipson, 13:06
- Re: 5 speed conversion, Sally or Dick Taylor, 12:46
- Re: Bosch Alternator, Mark Bullard, 11:11
- Re: 5 speed conversion, Greg Dito, 10:29
- 5 speed conversion, Neil Wehmeyer, 09:09
- Renaissance Faire Show Oct 25 - Florence, Alabama, Terry Geiger, 08:12
- Re: Rear end, Robert M. Lang, 07:54
- Bosch Alternator, mwpruitt, 07:38
- Re: Rear end, steve bridge, 06:48
- re: bent sway bar, Walt Philipson, 06:20
- Re: Wear in Sliding Splines, Sally or Dick Taylor, 00:59
- Re: New Valves, Sally or Dick Taylor, 00:25
October 20, 2003
- Re: Rear end, Greg Dito, 22:41
- Re: New Valves, Greg Dito, 22:31
- Re: Wear in Sliding Splines, Greg Dito, 22:23
- Re: New Valves, Richard Good, 21:16
- Re: New Valves, David Friedlander, 20:48
- Rear end, Lozano, 20:39
- Wear in Sliding Splines, John North, 20:29
- RE: Mechanichal Shop for TR-6 in Miami, guillermo gonzalez, 19:12
- Re: UJoint Disassembly, BigOldWumper, 17:40
- UJoint Disassembly, Douglas Morris, 17:29
- New Valves, StuBeatty, 17:18
- Re: Oil Filters & Seat Belts, StuBeatty, 17:09
- Re: Painting questions, jonmac, 16:32
- Fwd: Fw: TR6 SEAT BELT INTERLOCK REF: MIKES TR6 SEAT BELT, Mike, 15:31
- Head Light Electrical Joint Locations?, Mike Brandon, 13:29
- Oil Filters & Seat Belts, Jim Farris, 12:45
- bent sway bar, Walt Philipson, 10:05
- Re: Manifold water by pass pipe, Sally or Dick Taylor, 00:22
October 19, 2003
- Re: Compression ratios and head thickness, Greg Dito, 21:22
- Selling my TR-250, Skip Montanaro, 19:46
- Compression ratios and head thickness, Richard Seaton, 18:28
- Re: Removing rear axle, Mitchel Seff, 17:26
- Re: Removing rear axle, Timothy Holbrook, 12:23
- Re: Nisonger alternatives, Don Malling, 12:08
- Re: Nisonger alternatives, Michael T. Altomare, 11:55
- Nisonger alternatives, SOThornton, 11:47
- Newly ground Elgin cam not needed, Richard Seaton, 10:50
- RE: Removing rear axle, John North, 10:32
- No LBC content -- PDF vs HTML Image size, Don Malling, 09:13
- Another Paint question, Nick Gemas, 07:35
- Painting Questions, Derek Graham, 00:08
October 18, 2003
- TR6 Sighting, RICHARD A HENDRICKSON, 23:03
- Triumphfest03-Riverside, California, Tommy Thompson, 22:18
- Squeaky bushings, DaCRANEz, 20:23
- Replacing trailing arm bushings, Navarrette, Vance, 19:45
- San Juan Bautista Car Show, Hugh Barber, 18:10
- Manifold water by pass pipe, Richard Seaton, 17:44
- Loctite, TR6 Triumph, 12:46
- Painting, Neil Wehmeyer, 09:31
- Re: TRF TR6 Volume II Catalog, Don Malling, 06:36
- EGR Valve SET SCREW, Saul W. Adelman, 06:29
- Re: Painting, jonmac, 02:56
October 17, 2003
- Re: Painting Questions, Gary Fluke, 22:21
- RE: Removing rear axle, Hugh Barber, 22:04
- Re: Removing rear axle, Greg Dito, 21:54
- Buffet (not the Jimmy or eatin' kinds), Douglas Morris, 21:47
- Re: Removing rear axle, Mark J Bradakis, 21:41
- Removing rear axle, John North, 21:11
- Harbor Freight Jack on Sale, Hugh Barber, 21:11
- Re: TRF TR6 Volume II Catalog, Don Malling, 19:30
- Re: Re: Painting Questions, Cabrach Connor, 18:44
- Re: Re: Painting Questions, Greg Dito, 15:41
- Re: TRF TR6 Volume II Catalog, Greg Dito, 15:36
- Re: Painting Questions, Dwayne Cooper, 15:32
- Re: Painting Questions, Walt Boeninger, 15:16
- Re: Painting Questions, orthen, 14:13
- Re: TRF TR6 Volume II Catalog, Mark J Bradakis, 13:29
- TRF TR6 Volume II Catalog, Don Malling, 13:08
- Re: am I banned from the list?, Todd Bermudez, 12:23
- Re: Painting Questions, Walt Boeninger, 10:29
- am I banned from the list?, Jim Jones, 10:12
- Shut the heck up already!, Doug Warner, 09:03
- for god's sake, Ken Davis, 08:56
- Can we PLEEEZZZE move on!!!!!, Peter Macholdt, 08:34
- Take This Thread Off List Now, 6-PACK Webmaster, 08:09
- Further Retractions, Jim Jones, 08:06
- Stop This Thread Immediately, Mike, 07:57
- Further Retractions, Don Malling, 07:54
- RE: Moving Forward, Jim Swarthout, 07:49
- RE: Which World?, Jim Swarthout, 07:44
- RE: Moving Forward, Robert M. Lang, 07:38
- Extra set screws, Saul, 07:08
- Re: Moving Forward, Alan Salvatore, 07:03
October 16, 2003
- non LBC, Alan Salvatore, 22:24
- Re: TR parts, Jim Swarthout, 21:18
- Re: Moving Forward, Don Malling, 20:11
- Re: TSI Rockers, Nick Gemas, 19:31
- RE: Painting Questions, Shawn J. Loseke, 18:48
- Re: TSI Rockers, Jim Swarthout, 18:37
- RE: Moving Forward, Jim Swarthout, 18:01
- RE: Springs, Shawn J. Loseke, 18:00
- Painting Questions, Dwayne Cooper, 17:57
- Re: Thanks for the help!, Mark Bullard, 17:57
- Commercial messages, Don Malling, 16:46
- Re: Springs, Don Hasara, 12:32
- Vol 2 Catalog - High Marks for TRF, Michael Corbitt, 12:09
- test, Jim Jones, 12:02
- Re: Autojumble list for TR6/TR250 only?, Mike, 11:16
- Re: Which lock tight to use, Robert M. Lang, 10:44
- Re: commercial messages, Greg Dito, 10:39
- Re: Autojumble list for TR6/TR250 only? - was Commerial, Greg Dito, 10:30
- In my opinion........, S Mann, 10:16
- Autojumble list for TR6/TR250 only? - was Commerial Messages No, Terry Geiger, 09:25
- Re: Thanks for the help!, Ken Davis, 08:51
- Re: Which lock tight to use, Don Malling, 08:47
- Re: Thanks for the help!, Riveting Images, 08:32
- Commercial Messages, Don Malling, 08:30
- Re: Thanks for the help!, apackard68, 08:21
- Thanks for the help!, Riveting Images, 07:55
- RE: bypass valves, Neil Wehmeyer, 07:39
- Re: Fall is for Springs, Philip E. Barnes, 07:14
- commercial messages, STEPHEN KIRSIS, 06:50
- List Rules/Guidelines, Mike, 05:32
- re: commercial messages, Berzins Family, 03:23
- Re: Which lock tight to use, Sally or Dick Taylor, 00:33
- Re: Commercial Messages - No More, GSFuqua1, 00:33
- Fw: Wheels (NLBC), RICHARD A HENDRICKSON, 00:28
October 15, 2003
- Wheels (NLBC), RICHARD A HENDRICKSON, 22:36
- RE: Fall is for Springs, R. Ashford Little II, 21:39
- My New Obsession, Mark Anderton, 21:22
- Commercial messages/Autojumble list, Hugh Barber, 21:19
- Re: Commercial Messages - No More, Tom Di Iulio, 20:48
- Re: New product development! Formerly "Commercial Messages", Jim Swarthout, 20:30
- Re: Commercial messages, STEVE STERN, 19:19
- Fall is for Springs, Opntop, 19:18
- Which lock tight to use, Richard Seaton, 19:10
- Re: At my wit's end, Gary Fluke, 17:25
- Re: Carb questions - 74 TR6 175 CD2's, Alan Salvatore, 17:05
- Re: At my wit's end, Alan Salvatore, 16:57
- Re: At my wit's end, Don Malling, 16:48
- Re: Steering Help Needed Fast!, YeOldEd, 16:31
- Re: Please post the rules, Irv Korey, 16:08
- Re: Carb questions - 74 TR6 175 CD2's, Mark Riddle, 16:01
- Re: At my wit's end, Greg Dito, 14:32
- Re: At my wit's end, Philip E. Barnes, 13:28
- Re: Re: Steering Help Needed Fast!, Greg Dito, 12:58
- At my wit's end, Kevin McNelis, 12:55
- Carb questions - 74 TR6 175 CD2's, Gary R., 11:35
- Commercial Messages - my 2 cents, Ken Davis, 10:24
- I unsubscribed over the silliness of this issue., Joe18d, 09:55
- Re: Steering Help Needed Fast!, Timothy Holbrook, 09:18
- RE: Commercial Messages - No More, Robert M. Lang, 09:13
- Re: Steering Help Needed Fast!, Greg Dito, 09:12
- Re: Please post the rules, TR6me, 08:33
- RE: Commercial Messages - No More, Kronberg, Peter, 08:28
- Please post the rules, Andrew H. Litkowiak, 08:04
- Re: Carbs, Todd Bermudez, 07:58
- Steering Help Needed Fast!, Riveting Images, 07:48
- Re: Carbs, Philip E. Barnes, 06:47
- Re: Commercial Messages - No More, Mike, 06:40
- RE: Thread size, Saul, 04:54
October 14, 2003
- RE: Looking for EGR Valve pipe thread size, Peter Zaborski, 23:48
- commercialization, tom martin, 23:07
- Re: Commercial Messages, Kai M. Radicke, 22:37
- RE: Commercial Messages, Jim Swarthout, 21:51
- Re: Commercial Messages, Trumpet76TR6, 21:11
- RE: Looking for EGR Valve pipe thread size, Jim Swarthout, 20:47
- Looking for EGR Valve pipe thread size, Saul W. Adelman, 19:56
- RE: Carbs, Gary R., 18:44
- Compression, dwarner, 17:53
- I enjoy hearing about parts for sale, keep 'em coming Jim!, Joe18d, 17:46
- Re: Carbs, Mark Riddle, 17:00
- RE: Bustin' loose, R. Ashford Little II, 16:46
- Re: Commercial Messages, Jim Swarthout, 16:40
- Re: Carbs, Terry Geiger, 16:12
- Re: TRF Volume 2 Catalog, John Mitchell, 14:49
- Carbs, Wisnewski, Stan, 14:20
- Re: cam number 307621, Btp44, 13:52
- RE: Parts needed, Gary R., 13:35
- received Jim's roller rockers, Cregg Cowan, 12:01
- Re: TRF Volume 2 Catalog, Michael Corbitt, 11:45
- RE: Bustin' loose, R. Ashford Little II, 11:36
- Parts needed, Gary R., 11:32
- TR6 for sale - cheap, Jim Jones, 11:07
- Re: TRF Volume 2 Catalog, Todd Bermudez, 10:45
- RE: Box in Engine Compartment, Mark Hooper, 09:46
- TRF Volume 2 Catalog, Michael Corbitt, 09:30
- Box in Engine Compartment, Douglas Morris, 08:34
- Re: Pedestal to rocker shaft fit, Peter Macholdt, 08:30
- back from machine shop, STEVE KIRSIS, 07:41
- RE: Pedestal to rocker shaft fit, Mark Hooper, 06:17
October 13, 2003
- cam number 307621, Rick, 23:45
- Starter Gear, Douglas Morris, 19:20
- Re: Trouble Shooting cont. Venting Problem!, Paula J. Graffam, 18:31
- Saving TR6s, Jim Davis, 17:14
- RE: Bustin' loose, Jim Davis, 17:04
- Strange volt readings, Josh Tarnow, 16:05
- RE: A Car is Reborn:Discovery Channel, Gary R., 15:03
- Pedestal to rocker shaft fit, Peter Macholdt, 14:46
- Re: TR6 Value & History, Sally or Dick Taylor, 14:05
- Added some exterior pictures taken on a beautiful day., S Mann, 11:25
- Re: TR6 Value & History, S Mann, 09:21
- TR6 Value & History, Jim Farris, 07:46
- RE: Bustin' loose, R. Ashford Little II, 07:33
- Re: rear end noise, Mitchel Seff, 05:13
- Re: rear end noise, Doug Hofer, 04:40
October 12, 2003
- rear end noise, Grant Kester, 20:43
- Re: SCAM Please update your e-Bay account information, Greg Dito, 18:59
- down load pictures, Alan Salvatore, 17:40
- FW: Please update your e-Bay account information, Jim Davis, 17:36
- Bustin' loose, R. Ashford Little II, 16:13
- Re: urethane bushings, Dale, 13:22
- Re: TR6 Flexible coupling on steering shaft, Greg Dito, 11:04
- RE: Spin-On Oil Filter Number Question, Hugh Barber, 10:54
- Re: Flexible coupling on steering shaft, Greg Dito, 09:48
- A Car is Reborn:Discovery Channel, mahlmeister1, 06:22
- Re: Repairing the frame on a TR6, Mitchel Seff, 05:20
October 11, 2003
- Re: Flexible coupling on steering shaft, Mark Riddle, 22:30
- Re: Spin-On Oil Filter Number Question, Don Malling, 21:55
- Re: urethane bushings, Sally or Dick Taylor, 21:45
- Fw: Factory Hard Top, Earl Barfield, 20:56
- Re: Spin-On Oil Filter Number Question, David Friedlander, 20:19
- RE: hard top, Kendall Larsen, 19:48
- urethane bushings, DaCRANEz, 19:45
- Re: Repairing the frame on a TR6, Greg Dito, 19:19
- Spin-On Oil Filter Number Question, dwaldorf, 19:17
- All British Car and Cycle Show, October 18th, Safety Harbor,, michael lunsford, 18:21
- Flexible coupling on steering shaft, Richard Seaton, 17:47
- Repairing the frame on a TR6, feickert, 15:41
- RE: hard top, Shawn J. Loseke, 07:27
October 10, 2003
- straight six, Ann and Billy Green, 22:43
- Bentley Manuals, Michael Corbitt, 21:34
- RE: Brake MC Apple Hydraulics, Peter Zaborski, 18:28
- hard top, Ozium8221, 17:02
- Re: Brake MC Apple Hydraulics, Don Malling, 15:41
- Brake MC Apple Hydraulics, Todd Bermudez, 15:32
- Alan From Tampa, rfabie@erols.com, 13:27
- RE: Just for fun I added some under-the-hood pictures this, Navarrette, Vance, 10:33
- Just for fun I added some under-the-hood pictures this morning., S Mann, 09:24
- (no subject), JasonDC8, 03:27
October 09, 2003
- Re: Valve Job, Don Malling, 23:44
- Re: Cam Part Number, Greg Dito, 22:33
- FW:, Rick, 22:28
- Re: Valve Job, Sally or Dick Taylor, 21:45
- Re: Valve Job, Greg Dito, 21:17
- Valve Job, Douglas Morris, 20:09
- What is my car worth?, Robert L. Gannon, 19:41
- RE: TRF Catalog, R. Ashford Little II, 18:17
- Re: TRF Catalog, David Friedlander, 17:29
- Re: Powder color for wheels, Greg Dito, 15:25
- RE: Flywheel HP vs road wheel HP, Navarrette, Vance, 12:46
- Re: Flywheel HP vs road wheel HP, Sally or Dick Taylor, 11:57
- Powder color for wheels, Walt Philipson, 11:37
- RE: Flywheel HP vs road wheel HP, Shawn J. Loseke, 10:58
- Flywheel HP vs road wheel HP, Don Malling, 10:03
- Re: TRF Catalog, SOThornton, 09:00
- Car Value - Thanks to those responding, I added 4 pictures., S Mann, 08:50
- Fw: RE: Trouble Shooting cont., Paula J. Graffam, 08:46
- RE: Trouble Shooting cont., Jim Davis, 08:07
- Re: Gunst Bearing, Don Malling, 07:10
October 08, 2003
- Re: Opinions on cash value of my car., GSFuqua1, 23:05
- Re: Selling on EBAY, GSFuqua1, 22:20
- RE: Opinions on cash value of my car., Jim Davis, 19:55
- Looking for a 1969 TR6 "rear" carburettor, TR6 Triumph, 18:25
- unusual color combination, Philip E. Barnes, 14:15
- Trouble Shooting cont., Paula J. Graffam, 13:42
- Jim's Roller Rockers, Terry Geiger, 13:10
- Re: Video camera windshield mount, jonmac, 11:33
- Gunst Bearing, JasonDC8, 11:11
- RE: Distributor question, Gary R., 10:57
- Re: Distributor question, Greg Dito, 10:44
- Re: cylinder head, Timothy Holbrook, 10:31
- Opinions on cash value of my car., S Mann, 09:43
- Distributor question, Gary R., 09:00
- cylinder head, Jim Jones, 08:39
- test email, Jim Jones, 08:05
- Re: RE: Selling on EBAY, Greg Dito, 07:39
- Fuel / Evap loss Lines, c_davies, 07:21
- TRF Catalog, Saul W. Adelman, 04:07
- RE: Selling on EBAY, Alex Cherington, 02:50
October 07, 2003
- Brake & Shimmy Update..., Acekraut11, 22:06
- Re: Video Camera windshield mount, cm.sherman, 21:34
- RE: Selling on EBAY, Mark Hooper, 21:26
- selling on eBay, Doug Warner, 20:56
- Re: Selling on EBAY, GSFuqua1, 19:17
- TRF catalog, Saul W. Adelman, 18:10
- Re: Commercial message - parts for pick up at Triumph Fest, Sally or Dick Taylor, 17:39
- REar End supports, Curt Hoffman, 17:32
- Video Camera windshield mount, James Henningsen, 16:54
- RE: TRF Sale, Mike Munson, 15:11
- SU and Stromberg Carb parts and repairs.. and a lot more, Gary R., 14:16
- Commercial message - parts for pick up at Triumph Fest, Ted Schumacher, 13:55
- Re: Top Window Replacement, Sally or Dick Taylor, 11:50
- Selling on EBAY, Keith Meinhold, 11:43
- Re: Selling on EBAY, Mark Creamer, 11:09
- Tub Weight / was frame weight, MJSUKEY, 10:53
- TR6 for sale, Philip E. Barnes, 10:09
- RE: Top Window Replacement, Navarrette, Vance, 09:52
- Re: Top Window Replacement, GSFuqua1, 09:40
- RE: What's wrong here, Stephen Hanselman, 08:47
- Top Window Replacement, Acekraut11, 08:37
- TRF Sale, Vsnively, 07:42
- Re: Triumph World emblems, Blake J. Discher, 06:33
- Re: Drill bits and clutch fork -- Beginner question, Don Malling, 05:59
October 06, 2003
- TR6 frame weight, Ann and Billy Green, 22:16
- Re: Drill bits and clutch fork -- Beginner question, Mitchel Seff, 21:01
- Drill bits and clutch fork -- Beginner question, Don Malling, 19:57
- NBCC Car and Motorcycle Show, Richard Seaton, 17:50
- Re: Drivetrain problem, Sally or Dick Taylor, 12:33
- Non-original restorations, YeOldEd, 11:50
- Drivetrain problem, Ryan van Luchene, 10:56
- Re: TR6 w/ 30K, Acekraut11, 10:36
- RE: TR6 w/ 30K, Navarrette, Vance, 10:29
- Starting problem, Mike Keenan, 09:06
- RE: Radiator Drain Tap, Navarrette, Vance, 08:55
- Re: Rusted Wheels, Greg Dito, 08:42
- RE: Rusted Wheels, Gary R., 08:34
- what's wrong here follow up, Todd Bermudez, 07:59
- Rusted Wheels, jserignese, 07:43
- Triumph World emblems, jonmac, 07:27
- Re: Diff seal replacement help, jdhenn, 02:19
- Re: Diff seal replacement help, Sally or Dick Taylor, 00:30
October 05, 2003
- RE; Distributor Advance Weights, Sally or Dick Taylor, 21:53
- Differential repair complete, Mitchel Seff, 21:18
- REar end supports, Curt Hoffman, 20:46
- Re: REar end supports, Acekraut11, 20:33
- RE: REar end supports, Jim Davis, 20:19
- Re: REar end supports, Greg Dito, 20:10
- Rusted Wheels, jserignese, 20:07
- Re: Distributor Advance Weights, Gameparker, 17:37
- Re: Distributor Advance Weights, Greg Dito, 16:24
- Re: Distributor Advance Weights, Greg Dito, 16:14
- Distributor Advance Weights, Gameparker, 15:57
- Diff seal replacement help, James Henningsen, 13:09
- RE: Radiator Drain Tap, Jim Davis, 08:44
- Re: Convertible top tr6, Greg Dito, 08:38
- Radiator Drain Tap, Douglas Morris, 08:24
- RE: Sealant between brake servo and firewall?, Jim Davis, 06:58
- RE: Convertible top tr6, Jim Davis, 06:42
October 04, 2003
- Sealant between brake servo and firewall?, Steve Cirimele, 22:52
- Convertible top tr6, Steve R., 22:32
- Re: wiper motor, Don Malling, 22:17
- wiper motor, Opntop, 18:04
- Brake light on/off during shifting gears, Michael Greene, 12:59
- RE: Heater Control Valve, Scott Hershman, 12:22
- RE: sway bar bushing mounts, Jim Davis, 10:53
- RE:, Robert M. Lang, 10:47
- sway bar bushing mounts, DaCRANEz, 09:33
- Re: What's wrong here, GSFuqua1, 02:09
October 03, 2003
- Re: What's wrong here, GSFuqua1, 23:03
- re. What's wrong here, dwaldorf, 21:36
- Re: clutch fork pins, Sally or Dick Taylor, 21:00
- Re: Switching to DOT5 Brake Fluid, Don Malling, 20:25
- Switching to DOT5 Brake Fluid, Douglas Morris, 20:13
- Re: TR6 w/ 30K, Greg Dito, 19:17
- RE:, Navarrette, Vance, 17:45
- Re:, YeOldEd, 17:42
- RE:, Navarrette, Vance, 17:35
- RE: What's wrong here, R. Ashford Little II, 16:47
- Re: What's wrong here, Kendall Larsen, 15:40
- Kastner's New Book & Haynes Manual, Saul W. Adelman, 15:19
- Re: RE: What's wrong here, mwpruitt, 14:04
- Re: What's wrong here, Cregg Cowan, 13:43
- Kastner's New Book & Haynes Manual, Mike, 13:18
- Re: fan belt, bereza, 13:12
- RE: What's wrong here, Navarrette, Vance, 12:55
- RE: What's wrong here, R. Ashford Little II, 12:49
- What's wrong here, Todd Bermudez, 12:14
- TR6 For Sale Follow up IV, Brett Graffis, 10:23
- RE: clutch fork pins, Navarrette, Vance, 09:00
- Re: TR6 Ball Joint Removal, Paul G. Edelstein, 07:18
- Re: clutch fork pins, Mitchel Seff, 05:04
- clutch fork pins, JIMMY RICHARDS, 04:08
- Re:, Jeffrey B. Fetner, 02:15
October 02, 2003
- RE: I thought the BELT was the hard part, Peter Zaborski, 23:18
- RE: Rimmer Fenders?, Shawn J. Loseke, 22:57
- Re: Back-to-front ring gears, Sally or Dick Taylor, 21:57
- Re: What's wrong here, Jeffrey B. Fetner, 21:46
- Rimmer Fenders?, Mark Bullard, 19:18
- Need help (again), Mickylong, 19:01
- attn: Ric Keller, Kevin Andrews, 18:53
- Re: TR6 Ball Joint Removal, Don Malling, 17:57
- Re: Coker Classic Red Lines vs Michelin X Red Line (Coker), Irv Korey, 15:10
- Re: Using E-Z LOC inserts on Trailing arm studs., Sally or Dick Taylor, 13:21
- Triumph mailing list, david brady, 12:42
- Re: Re 9.5:1 + Distributor Setup, Walt Boeninger, 12:28
- Re: Coker Classic Red Lines vs Michelin X Red Line (Coker), Paul G. Edelstein, 12:25
- Re: I thought the BELT was the hard part, Cregg Cowan, 11:19
- I thought the BELT was the hard part, Scot Montrey, 10:30
- Michigan British Reliability Run Update, Blake J. Discher, 07:53
- TR6 baffle plate installation, Peter Farquharson, 06:36
- Re: Carb needle valve and choke.., Sally or Dick Taylor, 01:40
- Re 9.5:1 + Distributor Setup, Sally or Dick Taylor, 01:04
October 01, 2003
- Re: TR6 Ball Joint Removal - Take 2, Greg Dito, 22:44
- Re: TR6 Ball Joint Removal, Greg Dito, 22:31
- RE: TR6 Ball Joint Removal, Jim Swarthout, 22:18
- Re: TR6 Ball Joint Removal, Andrew H. Litkowiak, 21:58
- Re: fan belt, TR6 Triumph, 21:52
- Re: TR6 Ball Joint Removal, TR6 Triumph, 21:44
- Tidewater Triumph Register, Kevin Andrews, 21:12
- TR6 Ball Joint Removal, Chris & Melissa, 21:10
- Free lever shocks, Keith Meinhold, 18:55
- Re: fan belt, Mark Riddle, 17:41
- Re: 'Back to front' starter ring gears, jonmac, 16:43
- New TR6 Arm rest console (not Amco), Cregg Cowan, 13:51
- Re: fan belt, Sally or Dick Taylor, 12:56
- Re: fan belt, Cregg Cowan, 09:39
- TRF Investment, Gary R., 09:37
- Re: 9.5:1 compression, hotter cam and dist setup, Walt Boeninger, 09:27
- RE: 9.5:1 compression, hotter cam and dist setup, Navarrette, Vance, 09:17
- Carb needle valve and choke.., Gary R., 09:16
- fan belt, Scot Montrey, 08:11
- RE: clutch slave, Richard Cottingham, 05:52
- Re: Heater Control Valve, Don Malling, 05:06
- Ring Gear, Don Malling, 03:44