And let me add be sure to get throttle shaft seals as they tend to leak like
a sieve after a few years.
Gary R.
http://www.icer.net/TR6.html
74 TR6
Woodbury, CT
> -----Original Message-----
> From: owner-6pack@autox.team.net
> [mailto:owner-6pack@autox.team.net] On Behalf Of Mark Riddle
> Sent: Tuesday, October 14, 2003 7:01 PM
> To: SWisnewski@tiaa-cref.org
> Cc: 6pack@autox.team.net
> Subject: Re: Carbs
>
> Just to venture a couple of guesses, it sounds as if you have
> holes in the "diaphragms"(lean mixture at cruising speed, and
> lean acceleration), and very likely "bypass valves" that are
> in need of adjustment (bypass valves not seating can be the
> cause of fast idle 2000-2500 rpm).
>
> Cheers,
>
> Mark Riddle
> "72 TR6 With "adjusted" bypass valves-idling nicely at 850 rpm
|