6pack (date)

June 30, 2000

Brake warning light, DANMAS, 21:22
Re: Brake Warning Light, Gary & Priscilla Klein, 21:03
PDWA O-Rings Was: Locking Brakes, Gary & Priscilla Klein, 20:58
Re: Brake Warning Light, Sally or Dick Taylor, 20:17
Re: Locking Brakes, TRDOCTOR, 14:51
Re: Rimmer Brother, J. Garruba, 14:06
RE: Rimmer Brother, Creamer, Mark, 13:32
Rimmer Brother, Gabriel Ige, 13:19
Carb Screws (Pozi-Driv), Theodore R. Stevens, 09:08
Oil Tolerances, Magnecor and Posidrive bits, William Whitmoyer, 07:57
Re: Gearbox Woes!, Timothy Holbrook, 06:15
Re: Locking Brakes, Trsx69, 04:56
Brake Warning Light, Kendall Larsen, 01:44

June 29, 2000

Re: Gearbox Woes, Btp44, 19:51
Re: Fire in the Hole!!??, ROBERT L. GANNON, 18:49
Other than TR6, RETWIZBANG, 17:08
Re: Gearbox Woes!, Ken Davis, 15:39
Re: Carb screws, LaJoMor, 14:12
Re: Fire in the Hole!!??, Sally or Dick Taylor, 14:02
Oil Presure warning switch, Brian Borgstede, 11:48
RE: Carb screws, Brian Borgstede, 11:43
RE: Carb screws, Peter Zaborski, 09:33
Re: Carb screws, J. Garruba, 08:19
Fire in the Hole!!??, rcotting, 07:35
RE: Oil Pressure warning switch, Riddle, Mark, 06:14
Carb screws, Timothy Holbrook, 06:11
Re: Was Mobil 1 and Oil Pressure, Timothy Holbrook, 05:54
Re: Oil Presure warning switch, Timothy Holbrook, 05:48
Re: Gearbox Woes!, Timothy Holbrook, 05:44
dipstick found!, mbarre, 00:06

June 28, 2000

RE: oil cooler, Jim Hill, 23:22
Re: Was Mobil 1 and Oil Pressure, Jeff Johnson, 22:04
RE: I'm back, and the book is finished!, Dave Brackin, 18:15
Gearbox Woes!, Ken Davis, 18:05
Oil Presure warning switch, Bernard Robbins, 17:59
RE: oil cooler, Gary & Priscilla Klein, 17:50
Re: Locking Brakes, more, Gary & Priscilla Klein, 17:23
Re: Locking Brakes, Gary & Priscilla Klein, 16:16
I'm back, and the book is finished!, DANMAS, 16:00
Re: Mobil 1 and oil pressure, Timothy Holbrook, 05:34
Break in and oil, etc., Rex R. Townsend, 01:35

June 27, 2000

oil cooler, Ryan Miles, 22:29
Fw: Magnecor plug wires, Kent J. Miller, 21:12
OK, don't know what's going on with my door..., Tripp Meister, 21:12
TR250 Vacuum Control Valve, Dave Brackin, 20:40
Re: TR6 Overdrive, Btp44, 20:01
Re: Mobil 1 and oil pressure, Jeff Johnson, 18:14
RE: Locking Brakes, more, Gary & Priscilla Klein, 17:55
TR6 Overdrive, Chabo, 17:23
dipstick dimensions, mbarre, 16:44
Re: Locking Brakes, Gary & Priscilla Klein, 16:19
Re: Locking Brakes, TRDOCTOR, 15:37
Re: Locking Brakes, TRDOCTOR, 15:32
Re: Plugs and plug wires, Russ Pagano, 15:23
Magnecor plug wires, Timothy Holbrook, 12:55
4 way valve, John Truttman, 11:18
Re: Tyres Chewer, Cameron Greig, 10:23
Re: timing chains & suspension bushings, Sally or Dick Taylor, 10:20
Re: timing chains & suspension bushings, Timothy Holbrook, 10:16
timing chains & suspension bushings, Bill McIntire, 08:15
Car for sale, Timothy Holbrook, 06:31
Plugs and plug wires, Timothy Holbrook, 06:16
Re: Greetings,, Timothy Holbrook, 06:07
Greetings,, John Zimmerman, 04:53
Re: Locking Brakes, Trsx69, 04:40
Re: Pertronix Ignitor, ROBERT L. GANNON, 04:07
Re: Locking Brakes, Sally or Dick Taylor, 00:21

June 26, 2000

Pertronix Ignitor, John Truttman, 17:28
RE: Locking Brakes, Dave Brackin, 16:55
Re: Locking Brakes, Valerie Stabenow, 06:57
Re: Mobil One and oil pressure, Timothy Holbrook, 06:11
Re: Locking Brakes, Timothy Holbrook, 05:34
Locking Brakes, TRDOCTOR, 05:11

June 25, 2000

Shock oil and synthetic engine oil, Rex R. Townsend, 23:42

June 24, 2000

Pertronix Ignitor (Was: Running Question / Electrical), Kai M. Radicke, 20:23
Re: Running Question / Electrical, Kai M. Radicke, 19:51
motor oil, Ryan Miles, 19:26
Re: Mobil One and oil pressure, Gary & Priscilla Klein, 07:35

June 23, 2000

Re: Mobil One and oil pressure, ROBERT L. GANNON, 17:16
Mobil One and oil pressure, MS6453, 06:37
Re: TIRES / ARM, Timothy Holbrook, 05:51
Re: Running Question / Electrical, Sally or Dick Taylor, 00:12

June 22, 2000

Calling Scott Howel, Russ Pagano, 18:57
Fw: Cincinnati area TR mechanic, Kent J. Miller, 18:42
Fw: Cincinnati area TR mechanic, Kent J. Miller, 18:34
Re: Running Question / Electrical, Bernard Robbins, 18:00
Re: TIRES / ARM, Don, 17:09
Running Question / Electrical, Kai M. Radicke, 17:04
Re: Fw: HEAD STUDS / WASHERS, Sally or Dick Taylor, 15:41
Re: Frame Question, Mike Brinker, 13:28
Frame Question, P.J.T. Alferink, 13:08
Re: TIRES / ARM, Timothy Holbrook, 10:41
Re: reostrat problems?, dstauffa, 10:24
reostrat problems?, feickert, 09:53
Block drain tap, Walt Fogle, 08:32
Cincinnati area TR mechanic, Creamer, Mark, 08:02
Re: spline lock and caps, edwin.mcguirk, 07:58
Instructions for rebuilding TR250 front end, Peter Macholdt, 07:36
RE: Body Number and Shock Oil, William Whitmoyer, 07:16
Fw: HEAD STUDS / WASHERS, Don, 06:59
Fw: SPRINGS, Don, 06:58
TIRES / ARM, Don, 06:53
72 TR6 FS, Trmgafun, 05:46
Re: Frame Question, Mike Brinker, 04:56

June 21, 2000

Re: Studs for TR6 Head, Sally or Dick Taylor, 22:59
Re: SHOCK OIL & COMMISION TAG COLOR, Sally or Dick Taylor, 22:51
Re: Frame Question, Sally or Dick Taylor, 22:26
Re: spline lock and caps, Bernard Robbins, 13:59
Frame Question, Hicks, Stephen, 10:34
SHOCK OIL & COMMISION TAG COLOR, MS6453, 05:55

June 20, 2000

Re: Fw: Tire chewer, Sally or Dick Taylor, 22:00
undercoating, Ryan Miles, 21:43
re head studs, TR6me, 20:37
Studs for TR6 Head, Michael Graham, 19:21
Re: Fw: Tire chewer, Dale Morgan, 16:19
Re: Fw: Tire chewer, Peter Macholdt, 14:58
Fw: Tire chewer, Jorge Lozano, 14:38
Re: spline lock, Timothy Holbrook, 10:38
Re: Any TR6s that were only hardtop?, Murry Mercier, 09:54
Re: spline lock, edwin.mcguirk, 07:58

June 19, 2000

Re: TR6 Questions, Sally or Dick Taylor, 23:24
Re: poly bushings lube, Sally or Dick Taylor, 22:47
Fwd: Returned mail: User unknown, TomRJade, 22:13
Re: RE:350??, Kai M. Radicke, 18:21
RE:350??, The Whites, 14:48
poly bushings lube and carb/mileage problems, RedTriumphTr6, 13:48
Re: Trailing Arm Bushing Replacements - Help!, Rob Pennington, 08:40
Re: Trailing Arm Bushing Replacements - Help!, Kevin D. O'Connor, 07:49

June 18, 2000

John Phillips' oil leaking & etc., Rex R. Townsend, 21:30
TR6 Questions, John Phillips, 17:56
Re: Trailing Arm Bushing Replacements - Help!, Russ Pagano, 10:46
Trailing Arm Bushing Replacements - Help!, Ken Davis, 09:02

June 17, 2000

Charging... New Alternator, Ken Davis, 18:19
RE: 1971 TR6 Resto., Gary & Priscilla Klein, 14:54
plastic blasting, Brad ., 13:46
1971 TR6 Resto., Brad ., 13:41
Re: Any TR6s that were only hardtop?, Charles and Linda Duckworth, 12:40
RE: Any TR6s that were only hardtop?, Brian Borgstede, 12:31
RE: Any TR6s that were only hardtop?, Will, 09:53
Plug in TR block -- followup, Michael Graham, 05:40

June 16, 2000

RE: Any TR6s that were only hardtop?, Creamer, Mark, 12:54
Re: Any TR6s that were only hardtop?, Vito Pacione, 12:08
Re: Any TR6s that were only hardtop?, Timothy Holbrook, 11:53
Any TR6s that were only hardtop?, Creamer, Mark, 11:06
RE; brake pedal drop, Bill McIntire, 07:13

June 15, 2000

Brake pedal drop, Sally or Dick Taylor, 19:07
Re: FUEL PRESURE, Btp44, 13:01
RE: FUEL PRESURE, Peter Zaborski, 11:46
FUEL PRESURE, Don, 11:37

June 14, 2000

Re: Plug in TR6 Block, Btp44, 21:20
74/73 Front Bumper, Kyle K. Rice, 21:10
Re: Plug in TR6 Block, Btp44, 19:15
Re: rear anti-roll bar, Kevin O'Connor, 18:53
Re: rear anti-roll bar, Sally or Dick Taylor, 17:27
1970 TR6, CHRISTOPHER THOMSON PHELAN, 16:39
Re: Fw: Charging System Problem/questions.., Ken Davis, 15:51
Re: Plug in TR6 Block, Btp44, 14:46
Re: Plug in TR6 Block, Mike Brinker, 13:59
Plug in TR6 Block, Michael Graham, 12:53
overdrive help, Ryan Miles, 12:25
Re: Float height, Brian Borgstede, 11:10
Re: Fw: Charging System Problem/questions.., Glenn Rattmann, 09:03
RE: what should I do?, Timothy Holbrook, 05:49
Re: Float height, Sally or Dick Taylor, 01:05
Re: what should I do?, Btp44, 00:00

June 13, 2000

Re: Float height, Russ Pagano, 21:08
Fw: SPRINGS, Don, 20:58
TR6 Tail Lamp Housings, Jester, Chad (GEAE), 15:41
Re: RE; ride height & Tim Holbrook, Kevin D. O'Connor, 14:11
RE: frozen TR6 engine, John J. Black, 13:43
RE: what should I do?, Peter Zaborski, 13:41
Fw: Charging System Problem/questions.., Ken Davis, 13:40
Re: what should I do?, Timothy Holbrook, 13:30
TRF Rally springs, Peter Macholdt, 13:27
Re: what should I do?, Peter Macholdt, 13:01
RE; ride height & Tim Holbrook, Bill McIntire, 12:51
RE; what to do, Bill McIntire, 12:18
what should I do?, Ryan Miles, 11:25
Re: Float height with Grose Jets, Timothy Holbrook, 11:17
Re: ride height, Timothy Holbrook, 11:13
Re:frozen Tr6 engine, Ryan Miles, 11:10
Re: Rear Springs, Bob Kraeuter, 06:37
Re: Rear Springs, Kevin D. O'Connor, 06:09
Fw: Float height, Valerie Stabenow, 06:03
Rear Springs, mjmullin, 04:31
Float height, Sally or Dick Taylor, 01:02

June 12, 2000

Re: spline lock, edwin.mcguirk, 08:34

June 11, 2000

Charging System Problem/questions.., Ken Davis, 22:13
Re: Float height with Grose Jets, Sally or Dick Taylor, 21:44
Re: ride height, Sally or Dick Taylor, 21:11
ride height, TomRJade, 20:17
new guy, kevin mcevoy, 19:01
Float height with Grose Jets, Russ Pagano, 18:32
FROZEN TR6 ENGINE, Gabriel Ige, 03:39

June 10, 2000

Re: High RPM miss, Sally or Dick Taylor, 23:23
Re: High RPM miss, Dale Morgan, 18:56
Re: High RPM miss, Kyle K. Rice, 15:19
Re: High RPM miss, Dale Morgan, 14:58
Re: Fuel starvation, Sally or Dick Taylor, 12:25
Fuel starvation, ROBERT L. GANNON, 11:23
RE: Floor panels, Dave Brackin, 06:03
Re: Interior question, Charles and Linda Duckworth, 05:47
Re: High RPM miss, Sally or Dick Taylor, 00:13

June 09, 2000

Interior question, Doug Augenthaler, 21:43
Fw: Floor panels, Rick@tapco, 18:30
High RPM miss, Kyle K. Rice, 15:15
Re: spline lock, Peter Macholdt, 14:41
Re: spline lock, J. Garruba, 13:04
RE: spline lock, Peter Zaborski, 13:01
RE: spline lock, Jim Hill, 12:48
Re: spline lock, Sally or Dick Taylor, 12:06
Re: spline lock, Btp44, 10:57
spline lock, Peter Zaborski, 10:12
Re: rear suspension, Bill McIntire, 10:01

June 08, 2000

Inspected by # Duh, RangerCRS, 21:18
RE: leaded fuel O2 sensor, Bernard Robbins, 17:40
RE: leaded fuel O2 sensor, Santamaria, Joseph (Joseph), 15:23
RE: RE: Wheel noise, Riddle, Mark, 15:21
RE: leaded fuel O2 sensor, Bernard Robbins, 13:32
RE: Tim's Idle Mixture, Santamaria, Joseph (Joseph), 13:25
Amazing TR6 knowledge, RETWIZBANG, 12:23
Re: Amazing TR6 knowledge, Mike Brinker, 12:11
Re: Drain Plug, Vito Pacione, 11:58
RE: Drain Plug, Peter Zaborski, 11:36
Drain Plug, feickert, 10:57
re: door rattles, Walt Fogle, 09:04
re: Wheel Noise, Dixon, Andy, 08:21
autocross, Ralph Steinberg, 04:59
Re: Door Rattles, Sally or Dick Taylor, 01:10
RE: rear suspension, Sally or Dick Taylor, 00:45
Re: Front end ride height, Sally or Dick Taylor, 00:20

June 07, 2000

Re: Wheel noise, Sally or Dick Taylor, 23:53
Re: Front end ride height, Jorge Lozano, 20:38
cable failure, Opntop, 20:14
RE: Wheel noise, Dale Morgan, 18:27
RE: Rear suspension, Dale Morgan, 18:02
Re: Idle mixture, Btp44, 17:25
Re: Door Rattles, ROBERT L. GANNON, 15:31
Re: rear suspension, ROBERT L. GANNON, 15:26
Re: Front end ride height, ROBERT L. GANNON, 15:13
Tim's Idle Mixture, William Whitmoyer, 14:01
Wheel noise, John Truttman, 11:55
RE: Idle mixture, Phil Buck, 08:58
Trunk, rcotting, 08:36
Front end ride height, jmlozano, 07:52
RE: rear suspension, Bill McIntire, 07:51
Door Rattles, Chris Kincer, 07:08
Re: Carb bypass valves, Sally or Dick Taylor, 00:19

June 06, 2000

Re: starter problem, Sally or Dick Taylor, 23:55
Rich running at idle, Rex R. Townsend, 23:41
Re: Idle mixture, Sally or Dick Taylor, 22:45
Trunk, Doug Augenthaler, 18:41
Carb bypass valves, Russ Pagano, 18:13
RE: cable failure, Peter Zaborski, 13:11
starter problem, RedTriumphTr6, 10:15
Idle mixture, Timothy Holbrook, 09:54
Re: cable failure, Timothy Holbrook, 05:38
Re: Cable Failure, Trmgafun, 05:09
There is some hope!, Rex R. Townsend, 00:19
Re: cable failure, Sally or Dick Taylor, 00:03

June 05, 2000

Re: TR6: PI Metering Unit adjustment question, Tony Gordon, 21:59
Re: cable failure, Mike Brinker, 20:50
cable failure, Opntop, 20:04
Differential Terms, Kai M. Radicke, 18:50
Black valance, Dale Morgan, 17:14
RHD Triumphs on the road in San Diego, dstauffa, 15:41
Re: TR6: PI Metering Unit adjustment question, Bernard Robbins, 13:17
Re: Watt's Going On?, J. Garruba, 10:09
Watt's Going On?, rcotting, 08:45
carb rebuild, RedTriumphTr6, 08:23
Re: PI rebuild, Anthony Gordon, 07:54
Re: speedo, Bill McIntire, 07:11
floor panels, Harmon, Mike, 06:50

June 04, 2000

re:Trip carbs, Btp44, 20:43
TR6: PI Metering Unit adjustment question, Tony Gordon, 17:00

June 03, 2000

Re: 02 sensor sensitivity, Timothy Holbrook, 18:44
Re: TR6 rear wheel studs, Sally or Dick Taylor, 14:21
Re: Disappearing dashpot oil, J. Garruba, 07:35
TR6 rear wheel studs, Jim Davis, 06:43

June 02, 2000

Re: 02 sensor sensitivity, Sally or Dick Taylor, 17:40
Re: EFI on TR6??, Timothy Holbrook, 17:03
RE: Triple strombergs and Rimmer Exhaust, Timothy Holbrook, 16:57
Fwd: Re: FW: EFI on TR6??, Timothy Holbrook, 16:51
Re: FW: EFI on TR6??, Btp44, 15:32
RE: Triple strombergs and Rimmer Exhaust, Phil Buck, 14:34
Re: O2 sensor voltage drain, Kendall Larsen, 14:32
Triple strombergs and Rimmer Exhaust, Timothy Holbrook, 13:51
Fwd: Re: EFI on TR6??, Timothy Holbrook, 12:18
Speedo Variance, rcotting, 10:39
Fwd: Anyone Dynoed the TR6 Supercharger Was: EFI on TR6??, Timothy Holbrook, 09:43
Fwd: Re: FW: EFI on TR6??, Timothy Holbrook, 09:38
RE: Optimistic Speedometer and Odometer, Peter Zaborski, 09:27
Overly Fast speedometer, William Whitmoyer, 07:47
Mr.T is our A Team, rcotting, 05:25
Re: Vacuum with open exhausts, Sally or Dick Taylor, 01:15

June 01, 2000

Anyone Dynoed the TR6 Supercharger Was: EFI on TR6??, Don Clark, 23:28
Re: FW: EFI on TR6??, Btp44, 23:01
Re: EFI on TR6??, MS6453, 22:43
Re: Vacuum with open exhausts, Bernard Robbins, 22:42
Re: Vacuum with open exhausts, Sally or Dick Taylor, 22:00
Re: FW: EFI on TR6??, Sally or Dick Taylor, 21:42
Re: Optimistic Speedometer and Odometer, Sally or Dick Taylor, 21:04
Optimistic Speedometer and Odometer, Robert Reynolds, 19:47
Re: FW: EFI on TR6??, Btp44, 17:10
Re: yellow paint, Ryan Van Luchene, 16:21
TR6 interview with J. Bruce McWilliams, Mike Brinker, 14:28
Re: FW: EFI on TR6??, Bernard Robbins, 14:21
FW: EFI on TR6??, Jim Davis, 14:17
RE: Roll bar questions, Sullivan, John, G (John), 14:17
Roll bar questions, MS6453, 13:52
RE: June 24 party, Jim Hill, 13:41
Re: EFI on TR6??, Bernard Robbins, 13:31
June 24 party, William Whitmoyer, 09:39
Rear Ends....whooooo, William Whitmoyer, 09:27
FW: Rear Valance Black, Chris Kincer, 08:38
RE: Replacing locking switch, Bob Kraeuter, 07:06
They only come out at lunch, RETWIZBANG, 06:59
Fuel Injection, Total Advance Corporation, Sally or Dick Taylor, 00:16
Re: wipers/seatbelts, Sally or Dick Taylor, 00:11