My 1600 ran hot too. I had the rad recored which helped a lot. Don't get one
of those hi-efficiency rad cores as they have too many fins and block
airflow. Also make sure it's a 3 row core.
I would flush the entire system before doing that to make sure everything is
clean as it can be. I use Prestone flush and it seems to work OK.
I also use Redline Waterwetter which helps a bit. Try to run a mix of 40% af
to 60% water. AF is a horrible heat conductor.
You're not running a metal 4 blade fan are you? They're garbage.
Mike
----- Original Message -----
From: "aaron atkins" <amatkins@qnet.com>
To: "datsun list" <datsun-roadsters@autox.team.net>
Sent: Wednesday, May 01, 2002 1:30 PM
Subject: overheating/ troubleshooting
> As far as my overheating problems go, I've been looking as best I can with
> no luck. Here are the checks I have made so far.
>
> New temp gauge & sending unit
> 110# compression on all four cylinders
> timing dead on the money
> dwell set
> have flow in radiator
> new thermostat 180 deg., could not find a 160
> even temp across front of radiator
> no water in oil and vice versa
> clean exhaust..no billowing white smoke
> checked color of plugs...black sooty around outside but very center of
> electode is shiny brass; ceramic in same area off-white.
> burped system by screwdriver in thermo method.
>
> I'm stumped. The temp climbs right up to about 210 when I start
> getting nervous and shut it down. If you can come up with any more checks
> let me know. My next step is to get the radiator re-cored. That's
always
> money well spent in the long run anyway. I was this close to making
Solvang
> too. Dang it!!
>
> Aaron
> '67 1600
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|