triumphs
[Top] [All Lists]

Re: [TR] Changing from DOT 3 to DOT 5 Fluif

To: pethier@comcast.net
Subject: Re: [TR] Changing from DOT 3 to DOT 5 Fluif
From: Dave1massey@cs.com
Date: Tue, 7 May 2013 11:30:58 -0400 (EDT)
Cc: triumphs@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Full-name: Dave1massey
Bubbles will dissipate so long as you don't pump them into the system.  The 
trick is if you dump some fluid into the reservoir and get bubbles, walk 
away.  Comeback a day later and finish up.  

That's hard to do on race day, however.

Dave

In a message dated 5/7/2013 9:23:51 AM Central Daylight Time, 
pethier@comcast.net writes: 
> No trouble with the silicone so far.  I tried to go silicone in an MG 
> Midget autocross car, and things did not go well.  I could never get the tiny 
> bubbles out.  But that car did not have the proper full rebuilt you should 
> do with a silicone conversion.

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>