Not at all. The switch activates as soon as the pedal moves off the stop.
Just like anything with a dual braking circuit.
Dave
In a message dated 5/7/2013 10:58:56 AM Central Daylight Time,
cfmtr3a@verizon.net writes:
> The problem with that is you have to completely depress the pedal for the
> lights to activate.
>
> -----Original Message-----
> From: triumphs-bounces@autox.team.net
> [mailto:triumphs-bounces@autox.team.net] On Behalf Of Dave1massey@cs.com
> Sent: Tuesday, May 07, 2013 11:35 AM
> To: triumphs@autox.team.net
> Subject: Re: [TR] Changing from DOT 3 to DOT 5 Fluif
>
> One trick (done by my DPO) is to mount a pedal actuated switch from an MGB
> in place of the stop bolt on the pedal box. Buy some green and
> green/purple
> wire to match the colors when you wire it up.
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|