Joe Lynn wrote:
> When I was originally disassembling the slave for the rebuild I
> noticed that I was missing the return spring.... at this point I don't
> have the spring installed. If the spring pulls the piston back another
> 3/4" into the bore, it seems like I'll be back to where I started when
> it wasn't moving far enough to release the clutch?
That's the exact situation I have. As Randall suggests, it is likely a
broken taper pin and should be fixed soon. OTOH, it has taken me more
than 20 years to figure out I have this problem.
If you find some other cause for this (works only w/o return spring in
place) I would appreciate knowing what it is.
Geo Hahn
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.12.8/161 - Release Date: 11/3/2005
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|