Thanks to all who responded!
I've got two of the U-joints dismantled. Four more to go. The
sockets/C-clamp, plus additional banging with the mallet did the trick.
-Keith
> use the old socket trick, one socket that has an od smaller than the
> bearing cap and another socket with an id larger than the opposite
> bearing cap, put the smaller one in one side and the larger one on the
> other side and use either a vice (bench press for you old machineists)
> or a 6 inch c-clamp to push the bearing cap out the other side. hitting
> them only causes sore thumbs and frustration.
>
> larry
|