Now that I can see the area, did you try a crow's foot wrench?
> From: firstname.lastname@example.org
> To: email@example.com
> Date: Fri, 21 May 2010 11:03:02 -0700
> Subject: Re: [Shop-talk] Funny wrench request
> Thanks to all for the suggestions. Looks like the QuadBox is the best
> solution available, so I'm going to run over to my local Ace in a bit and
> see if they have one in stock.
> In case anyone is interested, here is a shot of the location in question,
> with the nut already removed. The nut in the foreground is actually 1/16"
> smaller than what should be in there, so you can see that the flange is
> quite close to the nut.
> And the angle of that shot makes the area seem rather roomier than it is,
> here's another one (other side, with the pan/flange removed) that better
> shows how close the frame member is:
> -- Randall
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
Suggested annual donation $12.96