shop-talk
[Top] [All Lists]

Re: Workbench Construction Question

To: johnm@ims.com
Subject: Re: Workbench Construction Question
From: james.a.babcock@adn.alcatel.com (James Babcock)
Date: Thu, 5 Feb 1998 16:58:14 -0500 (EST)
Sounds like a terminal case of shopwrights disease to me....

Jim
'80 TR7 dhc

John Miller wrote:
> 
> How did I get started on this project?  Let's see...
>    - wanted to rebuild a VW race motor,
>    - needed to clean the freshly machined block,
>    - but first needed to dry my air supply for blowing off a just washed 
>block,
>    - Shop-Talker's suggest an air cooler/condensor in front of the water trap,
>    - buy 50' of 1/2" OD tubing to pass air thru - but...
>    - need to clear out side of garage to hang tubing,
>    - opps, cleared out too much and now have room for new workbench over top 
>of compressor,
>    - too dark over the bench, need to add lights for new workbench.
>    
>    - #@$% engine is still in pieces!
>    
> A friend of mine always says:
>    "Before you can do anything, you have to do something else first." 
> 
> John Miller
-- 
James A. Babcock, Software Engineer   email: james.a.babcock@adn.alcatel.com
Alcatel Data Networks                   WWW: http://www.adn.alcatel.com
Ashburn, Virginia  USA                phone: +1 703 724 2762
Mike's first law of programming:  If you want it bad, you'll get it....bad.

<Prev in Thread] Current Thread [Next in Thread>