At 12:41 PM 08/09/2000 EDT, Bill707@aol.com wrote:
>
>In a message dated 8/9/00 0:41:53, yd3@nvc.net writes:
>
><< I have some Sears, Craftsman, tools in Whitworth. They are open ended
>wrenches,
>box end wrenches, and 1/2 drive sockets. >>
>
>I have the same set... very nice and sturdy, which I purcahsed in the 60's.
>Open end, box, and the 1/2" drive socket sets. The socket set is a bit
>overkill for most TC work, but very nice to have on hand. I never saw any
>3/8" bits. And, I'm sorry to say they are NFS>
>Bill Tantau
>St. Helena, CA
>PA PB TC
>
>
I believe Snap-on has or had recently 1/4 and 3/8 whit sockets. Of course
not cheap. Check with a Snap on dealer.
Mike
|