Hi
I saw your posting about buying an EZ-bleed for your GT6.
I had NO LUCK with modifying a GT6 master cylinder top
to use with an EZ-bleed. All it did was blow brake fluid
all over my paint job! If you have any luck please tell
me about it. (but be careful)
regards/dick
PS your welcome to look at or to try my setup before
you buy one.
PPS because of the GT6 has such a large plastic reservoir and very large
cap, (lots of square inches of stuff that is not very strong)
I would recomend using the very lowest pressure that you can
if you do use an EZ-bleed.
|