autox
[Top] [All Lists]

Re: Brake Pads

To: cjmccan@ilstu.edu
Subject: Re: Brake Pads
From: GSMnow@aol.com
Date: Thu, 8 Jul 1999 12:26:16 EDT
Date: Wed, 7 Jul 1999 19:42:43 -0500
From: "Chris McCann" 

<< I am in desparate need of new rear brake pads for my Integra GS-R... I 
have Axxis Metal Masters on the front, which I am not unhappy with, but I have
heard a lot about Carbotech!  I don't want to run the 'green' compound 
(because of squeeks and squeals; the car is daily driven)...  Has anyone had 
experience with the 'super street' (or something like that) pads?  Are they 
worth the substantial price difference? >>

I had Metal Masters before, and now I run Carbotech SSF pads. The SSF (Super 
Street F compound) have a little more friction thanthe Meatal masters for a 
bit less pedal pressure, they work just barely warm and I have never faded 
them. They seem much easier to modulate at the limit, the Metal Masters 
seened to lock up easier and were tough to hold on the edge. 

I have the greens on the rear, but I have rear drums. They do squeak a 
little, not bad at all, and with a drum the dust is not a problem, with disks 
it may be. They have alot more bite and work dead cold. My hand brake is 
actually able to stop the car with athority now. Unless I run a full tank of 
gas, the rears lock to easy, I added slotted rotors to the front and that 
balanced it out a bit better. Don't even think of slotted rotors on greens. 

Carbotechs are not cheap, but the SSF's work in any conditions and don't seem 
to be wearing at all even on the slotted rotors. I am tempted to get them for 
my minivan.

Gary M.
DTN nominee, any chance I'll get some votes from away JD?

<Prev in Thread] Current Thread [Next in Thread>