Stripped Sheetmetal Screws, John Mitchell, 2004/05/28

• Re: Stripped Sheetmetal Screws, Philip E. Barnes, 2004/05/28
• Re: Stripped Sheetmetal Screws, Walt Boeninger, 2004/05/28
• Re: Stripped Sheetmetal Screws, John Mitchell, 2004/05/28

Free Half a TR6, Bill Moine, 2004/05/25

• RE: Free Half a TR6, Navarrette, Vance, 2004/05/26
• RE: Free Half a TR6, Robert M. Lang, 2004/05/26
• RE: Free Half a TR6, Bill Moine, 2004/05/28

Pressure Plate, Paula J. Graffam, 2004/05/25

• pressure plate, Paula J. Graffam, 2004/05/25

Uprated springs TR250, Don Malling, 2004/05/25

• Re: Uprated springs TR250, apackard68, 2004/05/25

RE:OVERDRIVE, Harry Hart, 2004/05/25

• Re: RE:OVERDRIVE, Greg Dito, 2004/05/25
• RE:OVERDRIVE, Todd Bermudez, 2004/05/25

Replacement shaft radio cont, John Reynolds, 2004/05/24

• RE: Replacement shaft radio cont, Gary Fluke, 2004/05/25

shaft-style stereo for TR6, Ryan van Luchene, 2004/05/24

• RE: shaft-style stereo for TR6, Jim Davis, 2004/05/24
• Re: shaft-style stereo for TR6, trinitygadget, 2004/05/24
• RE: shaft-style stereo for TR6, Ryan van Luchene, 2004/05/24
• Re: shaft-style stereo for TR6, Theodore R. Stevens, 2004/05/24
• Re: shaft-style stereo for TR6, Ryan van Luchene, 2004/05/24
• RE: shaft-style stereo for TR6, Todd Bermudez, 2004/05/24
• RE: shaft-style stereo for TR6, Navarrette, Vance, 2004/05/24

Cutting holes in rear valance of 72 TR6., Brian Alwin, 2004/05/24

• Re: Cutting holes in rear valance of 72 TR6., genehart, 2004/05/24

No Spark, JRURHH, 2004/05/23

• Re: NO Spark, Sally or Dick Taylor, 2004/05/23

Bad morning that could've been much worse, Darrell Ramsey, 2004/05/23

• Bad morning that could've been much worse, Darrell Ramsey, 2004/05/23

Distributor rebuilders sources for TR6, KKSMC, 2004/05/23

• Distributor rebuilders sources for TR6, genehart, 2004/05/24

Swap meet offerings -- was Re: Surrey Glass, Ken Davis, 2004/05/23

• Re: Swap meet offerings -- was Re: Surrey Glass, Don Malling, 2004/05/23
• Re: Swap meet offerings -- was Re: Surrey Glass, TR6UO, 2004/05/23
• Re: Swap meet offerings -- was Re: Surrey Glass, Kai M. Radicke, 2004/05/23

Surrey Glass, Eureka Saws Co, Inc., 2004/05/23

• Re: Surrey Glass, Kai M. Radicke, 2004/05/23

blue smoke on start up--new engine, Colin Thom, 2004/05/22

• RE: blue smoke on start up--new engine, Navarrette, Vance, 2004/05/24
• RE: blue smoke on start up--new engine, Rick & Lori, 2004/05/24

work shop manual on cd rom, Footfrek, 2004/05/22

• Re: work shop manual on cd rom, GSFuqua1, 2004/05/22

Convertible top snaps???, Adam C Beasley, 2004/05/21

• Re: Convertible top snaps???, trinitygadget, 2004/05/21

A Couple of Genaric Questions, John & Allison Cyganowski, 2004/05/21

• Re: A Couple of Genaric Questions, Mark Bullard, 2004/05/21
• Re: A Couple of Genaric Questions, Todd Bermudez, 2004/05/21

TR Hybrid, tiscali, 2004/05/20

• RE: TR Hybrid, Navarrette, Vance, 2004/05/21

"o" ring in carb., Saul W. Adelman, 2004/05/19

• Re: "O" ring in carb., Sally or Dick Taylor, 2004/05/20

redline tire question, Jim Jones, 2004/05/19

• Re: redline tire question, Jim Jones, 2004/05/19
• RE: redline tire question, Jim Davis, 2004/05/19

Gunst bearing question, Jim Jones, 2004/05/19

• Re: Gunst bearing question, trinitygadget, 2004/05/19

Gunst bearing, Mitchel Seff, 2004/05/19

• Re: Gunst bearing, Mitchel Seff, 2004/05/19
• Gunst Bearing, Don Malling, 2004/05/22

Crane XR700 vs XR 3000, Mark Bullard, 2004/05/18

• Re: Crane XR700 vs XR 3000, Terry Geiger, 2004/05/18
• RE: Crane XR700 vs XR 3000, Gary R., 2004/05/18

Gunst bearing results..?, Kevin Thompson, 2004/05/17

• Re: Gunst bearing results..?, Dave Mahlmeister, 2004/05/18
• Re: Gunst bearing results..?, Todd Bermudez, 2004/05/18
• Re: Gunst bearing results..?, Sally or Dick Taylor, 2004/05/19

Distributor installation, Walter Fogle, 2004/05/16

• Re: Distributor installation, Sally or Dick Taylor, 2004/05/17

Question on the Electronic Ignition System., Mike Brandon, 2004/05/16

• RE: Question on the Electronic Ignition System., Cris Hemingway, 2004/05/16
• Re: Question on the Electronic Ignition System., Acekraut11, 2004/05/16
• RE: Question on the Electronic Ignition System., Gary R., 2004/05/17
• Question on the Electronic Ignition System., Mike Brandon, 2004/05/18

triple carb update, Eureka Saws Co, Inc., 2004/05/16

• RE: triple carb update, Navarrette, Vance, 2004/05/17

Question - Tube Shock Conversion, Jay Welch, 2004/05/16

• Re: Question - Tube Shock Conversion, Jay Welch, 2004/05/18

Newbie Questions, John & Allison Cyganowski, 2004/05/15

• Re: Newbie Questions, bratt, 2004/05/15

Running Hot UPDATE, Mark Martin, 2004/05/15

• Re: Running Hot UPDATE, Navarrette, Vance, 2004/05/17
• Re: Re: Running Hot UPDATE, trinitygadget, 2004/05/17

throwout bearing, Jim Jones, 2004/05/14

• Re: throwout bearing, Kai M. Radicke, 2004/05/14

lightened flywheel on Ebay, Lizirbydavis, 2004/05/14

• lightened flywheel on EBay, Lizirbydavis, 2004/05/14

Gas Prices was Re: Looking for mirror, Ken Davis, 2004/05/14

• RE: Gas Prices was Re: Looking for mirror, Rick & Lori, 2004/05/15

1974 TR6 Rear Bumper, Doreen Marengo, 2004/05/14

• RE: 1974 TR6 Rear Bumper, Todd Bermudez, 2004/05/14

Running Hot, Mark Martin, 2004/05/14

• RE: Running Hot, Rick & Lori, 2004/05/14
• Re: Running Hot, Acekraut11, 2004/05/14
• Re: Running Hot, Acekraut11, 2004/05/14
• Re: Running Hot, Sally or Dick Taylor, 2004/05/14
• Re: Running Hot, Kendall Larsen, 2004/05/14
• Re: Running Hot, Sally or Dick Taylor, 2004/05/14

Something is wrong, Robert Liam Gannon, 2004/05/13

• RE: Something is wrong, Robert Liam Gannon, 2004/05/16

Trash in the master cylinder, Lizirbydavis, 2004/05/13

• RE: Trash in the master cylinder, Navarrette, Vance, 2004/05/14
• RE: Trash in the master cylinder, genehart, 2004/05/14
• RE: Trash in the master cylinder, Robert M. Lang, 2004/05/14
• Re: Trash in the master cylinder, Peter Macholdt, 2004/05/14
• Re: Trash in the master cylinder, Doug Hofer, 2004/05/14

Roll bar material, Chuck Arnold, 2004/05/13

• Re: Roll bar material, Mark J. Bradakis, 2004/05/13
• Re: Roll bar material, steve bridge, 2004/05/13
• Re: Roll bar material, Mike Munson, 2004/05/14

Dash pot 'O' ring sizes, KKSMC, 2004/05/13

• Re: Dash pot 'O' ring sizes, trinitygadget, 2004/05/13

Whacko tranny, Paula J. Graffam, 2004/05/13

• RE: Whacko tranny, Navarrette, Vance, 2004/05/13
• Re: Whacko tranny, Sally or Dick Taylor, 2004/05/13
• Re: Whacko tranny, Btp44, 2004/05/13
• Re: Whacko tranny, Paula J. Graffam, 2004/05/15
• Re: Whacko Tranny, Sally or Dick Taylor, 2004/05/16

Looking for mirror, Richard Seaton, 2004/05/12

• Re: Looking for mirror, Davgil, 2004/05/13
• Re: Looking for mirror, Robert M. Lang, 2004/05/13
• RE: Looking for mirror, Steve Hanselman, 2004/05/13
• RE: Looking for mirror, Navarrette, Vance, 2004/05/13
• RE: Looking for mirror, Mark Hooper, 2004/05/13
• Re: Looking for mirror, TR6UO, 2004/05/13
• Re: Looking for mirror, Robert M. Lang, 2004/05/13

Re: Oil cooler cleanliness, jonmac, 2004/05/12

• Re: Oil cooler cleanliness, Kai M. Radicke, 2004/05/12
• Re: Oil cooler cleanliness, jonmac, 2004/05/12
• RE: Oil cooler cleanliness, Navarrette, Vance, 2004/05/13

Smooth idle and vacuum leaks (long), Navarrette, Vance, 2004/05/12

• Re: Smooth idle and vacuum leaks (long), trinitygadget, 2004/05/12

74 TR6 Keys, B&C Chamness, 2004/05/11

• Re: 74 TR6 Keys, Acekraut11, 2004/05/11
• Re: 74 TR6 Keys, Jay Welch, 2004/05/12
• Re: 74 TR6 Keys, Theodore R. Stevens, 2004/05/12
• RE: 74 TR6 Keys, Navarrette, Vance, 2004/05/12
• Re: 74 TR6 Keys, Todd Bermudez, 2004/05/12
• Re: Re: 74 TR6 Keys, trinitygadget, 2004/05/12
• Re: 74 TR6 Keys, Mark Bullard, 2004/05/12
• Re: 74 TR6 Keys, Adam Wilhite, 2004/05/12
• RE: 74 TR6 Keys, RangerCRS, 2004/05/12
• Re: 74 TR6 Keys, Sally or Dick Taylor, 2004/05/12
• RE: 74 TR6 Keys, Rick & Lori, 2004/05/12
• Re: 74 TR6 Keys, Mark Bullard, 2004/05/13

Engine Main Bearings?, Mark Pruitt, 2004/05/11

• RE: Engine Main Bearings?, Hugh Barber, 2004/05/11
• Re: Engine Main Bearings?, Kai M. Radicke, 2004/05/11

red hot headers, Eureka Saws Co, Inc., 2004/05/10

• Re: red hot headers, Walt Boeninger, 2004/05/10
• RE: red hot headers, Robert Fabie, 2004/05/10
• Re: red hot headers, Sally or Dick Taylor, 2004/05/10

Flushing out oil cooler, MJSUKEY, 2004/05/10

• Re: Flushing out oil cooler, Kai M. Radicke, 2004/05/10
• Re: Flushing out oil cooler, Kai M. Radicke, 2004/05/10

Question for electrical gurus, Gary R., 2004/05/10

• Re: Question for electrical gurus, Peter Macholdt, 2004/05/10
• RE: Question for electrical gurus, Gary R., 2004/05/11
• Re: Question for electrical gurus, Acekraut11, 2004/05/11
• Re: RE: Question for electrical gurus, trinitygadget, 2004/05/11
• RE: RE: Question for electrical gurus, Gary R., 2004/05/11

Wot no e-mail!, YeOldEd, 2004/05/09

• Re: Wot no e-mail!, GSFuqua1, 2004/05/09

Lost Californian needs help with TR6, kaicee, 2004/05/06

• Re: Lost Californian needs help with TR6, genehart, 2004/05/06
• Re: Lost Californian needs help with TR6, Lawrence K. Brown, 2004/05/06
• Re: Lost Californian needs help with TR6, Robert M. Lang, 2004/05/06
• Re: Lost Californian needs help with TR6, Kai M. Radicke, 2004/05/06
• Re: Lost Californian needs help with TR6, kaicee, 2004/05/06
• Re: Lost Californian needs help with TR6, genehart, 2004/05/07
• Re: Lost Californian needs help with TR6, genehart, 2004/05/07

Rear Shocks, Calvin Allen, 2004/05/06

• Re: Rear Shocks, Acekraut11, 2004/05/06

Question on later TR6 seat frames., Don Malling, 2004/05/06

• RE: Question on later TR6 seat frames., Todd Bermudez, 2004/05/06
• RE: Question on later TR6 seat frames., k6na@cts.com, 2004/05/06

Lever Dampers, Michael Corbitt, 2004/05/06

• Re: Lever Dampers, Sally or Dick Taylor, 2004/05/06

J Type Overdrive in a 72 TR6?, Mark Pruitt, 2004/05/05

• Re: J Type Overdrive in a 72 TR6?, Don Malling, 2004/05/05

Electric Cooling Fans, Bob, 2004/05/05

• RE: Electric Cooling Fans, Rick & Lori, 2004/05/05

consoles for a TR6, Gene Holtzclaw, 2004/05/05

• Re: consoles for a TR6, Mark Bullard, 2004/05/05

Distributor Timing, Sally or Dick Taylor, 2004/05/05

• RE: Distributor Timing, Rick & Lori, 2004/05/05
• RE: Distributor Timing, Gary Fluke, 2004/05/05
• RE: Distributor Timing, Robert M. Lang, 2004/05/06
• Re: Distributor Timing, Sally or Dick Taylor, 2004/05/06

Re-webbing seat belts, Navarrette, Vance, 2004/05/05

• Re: Re-webbing seat belts, genehart, 2004/05/05

Help...looking for lost (?) heater part, Richard Seaton, 2004/05/04

• Fw: Help...looking for lost (?) heater part, Richard Seaton, 2004/05/05

Valve Stem Seals, Rick & Lori, 2004/05/04

• RE: Valve Stem Seals, Navarrette, Vance, 2004/05/05

hard top, AM Racing wheels, Jim Jones, 2004/05/04

• RE: hard top, AM Racing wheels, Todd Bermudez, 2004/05/04
• Re: hard top, AM Racing wheels, GSFuqua1, 2004/05/05
• Re: hard top, AM Racing wheels, Jim Jones, 2004/05/05
• Re: hard top, AM Racing wheels, GSFuqua1, 2004/05/05

Emergency Flasher Switch Problem.. I think., Gary R., 2004/05/04

• Re: Emergency Flasher Switch Problem.. I think., genehart, 2004/05/05

Breather Hoses, Buzz Osborn, 2004/05/04

• Breather Hoses, Brian Borgstede, 2004/05/04
• RE: Breather Hoses, k6na@cts.com, 2004/05/06

Yokohama Avid 205/70-15 or 205/75-15, Don Vinton, 2004/05/03

• RE: Yokohama Avid 205/70-15 or 205/75-15, R. Ashford Little II, 2004/05/04

vacuum retard, DaCRANEz, 2004/05/03

• RE: vacuum retard, Navarrette, Vance, 2004/05/03
• Re: vacuum retard, Sally or Dick Taylor, 2004/05/04
• Re: vacuum retard, Jeff Fetner, 2004/05/04
• Re: vacuum retard, Jeff Fetner, 2004/05/04
• Re: vacuum retard, Jay Welch, 2004/05/04
• Re: vacuum retard, DaCRANEz, 2004/05/04
• RE: vacuum retard, Navarrette, Vance, 2004/05/04
• RE: vacuum retard, Jay Welch, 2004/05/04
• Re: Vacuum Retard, Sally or Dick Taylor, 2004/05/04

Emergency flasher location, Ruffner, James A *HS, 2004/05/03

• RE: Emergency flasher location, Todd Bermudez, 2004/05/03
• RE: Emergency flasher location, Steve Hanselman, 2004/05/03

Front Brakes, Mark Bullard, 2004/05/02

• Re: Front Brakes, Greg Dito, 2004/05/02
• Re: Front Brakes, Mark Bullard, 2004/05/03
• RE: front brakes, Ryan Miles, 2004/05/04

Still running rough, KKSMC, 2004/05/02

• RE: Still running rough, Jim Davis, 2004/05/02
• Re:Still Running Rough, Sally or Dick Taylor, 2004/05/02
• Still running rough, KKSMC, 2004/05/03
• RE: Still running rough, Navarrette, Vance, 2004/05/03

Topping up with Anti freeze?, Mike Brandon, 2004/05/02

• Re: Topping up with Anti freeze?, Sally or Dick Taylor, 2004/05/02
• Re: Topping up with Anti freeze?, Jay Welch, 2004/05/03

Valve cover filler cap, Rick, 2004/05/01

• Re: Valve cover filler cap, Mitchel Seff, 2004/05/01
• RE: Valve cover filler cap, Rick, 2004/05/03