mg-t
[Top] [All Lists]

RE: TF Scuttle top

To: "'david.tinker'" <david.tinker@virgin.net>, mg-t@autox.team.net
Subject: RE: TF Scuttle top
From: "Hermance, Jonathan" <Jonathan_Hermance@ATK.COM>
Date: Wed, 14 Jun 2000 08:15:13 -0500
David,

I have a TF but am not clear on how/what you wish measured.  Thinking I know
what you want might generate measurements that would lead to drilling twice.

Jon

-----Original Message-----
From: david.tinker [mailto:david.tinker@virgin.net]
Sent: Tuesday, June 13, 2000 4:43 PM
To: mg-t@autox.team.net
Subject: Fw: TF Scuttle top


Sorry to bomb the list, but has nobody got a ruler or worse a TF.
----- Original Message -----
From: david.tinker <david.tinker@virgin.net>
To: <mg-t@autox.team.net>
Sent: Sunday, June 11, 2000 9:36 PM
Subject: TF Scuttle top


> Can somebody out there please measure their TF windscreen mounting bracket
> and let me have the position of the mounting holes each side of the
scuttle
> top, measured backwards from the bulkhead.  I know the distance up from
the
> folded lip of the scuttle top is 3/4". The body man filled the original
> holes with weld when doing a repair and has not redrilled them.
>
> I have a fairly good idea where they should be but want to be sure
 measure
> twice drill once!) It may be that I could drill  the holes through from
the
> inside using the scuttle frame as a template.
>
> Thanks in advance
>
> David Tinker
>

<Prev in Thread] Current Thread [Next in Thread>