Sorry to bomb the list, but has nobody got a ruler or worse a TF.
----- Original Message -----
From: david.tinker <david.tinker@virgin.net>
To: <mg-t@autox.team.net>
Sent: Sunday, June 11, 2000 9:36 PM
Subject: TF Scuttle top
> Can somebody out there please measure their TF windscreen mounting bracket
> and let me have the position of the mounting holes each side of the
scuttle
> top, measured backwards from the bulkhead. I know the distance up from
the
> folded lip of the scuttle top is 3/4". The body man filled the original
> holes with weld when doing a repair and has not redrilled them.
>
> I have a fairly good idea where they should be but want to be sure
measure
> twice drill once!) It may be that I could drill the holes through from
the
> inside using the scuttle frame as a template.
>
> Thanks in advance
>
> David Tinker
>
|