Interesting. My gear box has a "DC" stamped on it and silver paint applied by
a guy named Duane Carlson. Your OD seams to have been painted too. Does it
have California history?
Happy holidays, Friends.
DH
> On December 24, 2017 at 7:20 AM Greg Blake via Fot wrote:
>
>
> Nope. Trying to follow along per the buckeye article. He recommended
> removing the rear housing while the OD is still attached. My next try will be
> to remove the whole unit unless I have an aha moment and figure out what's
> going on.
>
> Pics of my situation.
>
>
>
> Sent from my iPhone
>
> > > On Dec 24, 2017, at 8:31 AM, Jerry Van Vlack wrote:
> >
> > Have you removed the entire OD from the Transmission or are you
> > just trying to remove the rear housing while the main OD case is still
> > attached to the transmission?
> >
> > -----Original Message----- From: Greg Blake via Fot
> > Sent: Sunday, December 24, 2017 8:23 AM
> > To: EDWARD WOODS
> > Cc: Greg Blake via Fot
> > Subject: Re: [Fot] TR type A OD
> >
> > I actually have that printed and on the workbench. It is an
> > excellent article.
> >
> > I've included a picture below for where I got stuck. Reading it
> > again this morning, maybe the brake ring is trying to come out with the
> > rear housing? With only a 1/4" gap, how does one drive the brake ring back
> > into the main housing?
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Sent from my iPhone
> >
> > > > > On Dec 24, 2017, at 6:59 AM, EDWARD WOODS wrote:
> > >
> > > Greg,
> > >
> > > You're not using the excellent article on the A type
> > > overdrive found on the Buckeye Triumphs technical site.
> > >
> > > Ed Woods
> > >
> > > > > > > On December 23, 2017 at 10:50 PM Greg Blake via
> > > Fot wrote:
> > > >
> > > >
> > > > I am attempting to rebuild an A type OD over the
> > > > holiday weekend. I tried to separate the rear OD housing from the main
> > > > OD housing after removing the rear output flange and speedo drive. Once
> > > > i removed the 6 nuts and washers, I had to tap the studs with a brass
> > > > drift to get the rear housing to separate from the main housing. But
> > > > now i can't get the rear OD housing to come completely off. I can get
> > > > about a 1/4" gap between the rear and main housing but it won't come
> > > > all the way off. What am I doing wrong?
> > > >
> > > > Thanks. Greg
> > > >
> > > > Sent from my iPhone
> > > > _______________________________________________
> > > > fot at autox.team mailto:fot at autox.team .net
> > > >
> > > > http://www.fot-racing.com
> > > >
> > > > Donate: http://www.team.net/donate.html
> > > > Archive: http://www.team.net/archive
> > > > Forums: http://www.team.net/forums
> > > > Unsubscribe/Manage:
> > > > http://autox.team.net/mailman/options/fot/fogbro1 at comcast.net
> > > >
> > > > > > >
> > > > >
> >
> >
> >
> > _______________________________________________
> > fot at autox.team mailto:fot at autox.team .net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/fot/jerryvv at roadrunner.com
> >
> > > _______________________________________________
> fot at autox.team mailto:fot at autox.team .net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye at
> comcast.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20171224/a3c4bbaf/attachment.html>
|