fot
[Top] [All Lists]

[Fot] TR type A OD

Subject: [Fot] TR type A OD
From: gblake58tr3 at icloud.com (Greg Blake)
Date: Tue, 26 Dec 2017 14:58:18 -0600
References: <BB5A8E2C-AF79-432C-9CE3-2C899EC9911B@icloud.com> <CAMJWJcHKhHaDrVrz7BqzpLLwYpWoqVXAMzmnchEhRLToVoUDmg@mail.gmail.com> <F9E472FF-B3C3-4E84-A8AE-7296FDD586D9@icloud.com> <B7C11DC8-474B-451C-A790-7B5BFBEE494E@comcast.net>
Clear. Must be what's within reach at the moment. Inside looks good. Might get 
by with springs, gaskets and seals. 

So far on the box I know I need one synchro and some case repair. Will get the 
main shaft out another weekend to see what else I need.

Sent from my iPhone

> On Dec 26, 2017, at 12:22 PM, Dave <dlhogye at comcast.net> wrote:
> 
> Ah yes. Blue silicon? Another telltale sign of "DC".  
> 
> Sent from my iPad
> 
>> On Dec 26, 2017, at 8:55 AM, Greg Blake via Fot <fot at autox.team.net> 
>> wrote:
>> 
>> All,
>> 
>> Thanks for the responses. The OD came apart this morning. I took the main 
>> case off and removed the bridge pieces. Then I put  the rear case in a vice, 
>> applied some heat to the brake ring and a brass punch separated it from the 
>> rear case. Easy. The person that rebuilt this into previously used copious 
>> amounts of silicon on all surfaces. I've found plenty of small chucks in 
>> various orifices. 
>> 
>> 
>> Thanks again
>> 
>> Greg
>> Sent from my iPhone
>> 
>>> On Dec 26, 2017, at 10:19 AM, John Styduhar <johnstydo at gmail.com> wrote:
>>> 
>>> Did you get your OD apart?
>>> 
>>> 
>>>     Virus-free. www.avast.com
>>> 
>>>> On Sat, Dec 23, 2017 at 10:50 PM, Greg Blake via Fot <fot at 
>>>> autox.team.net> wrote:
>>>> I am attempting to rebuild an A type OD over the holiday weekend. I tried 
>>>> to separate the rear OD housing from the main OD housing after removing 
>>>> the rear output flange and speedo drive. Once i removed the 6 nuts and 
>>>> washers, I had to tap the studs with a brass drift to get the rear housing 
>>>> to separate from the main housing. But now i can't get the rear OD housing 
>>>> to come completely off. I can get about a 1/4" gap between the rear and 
>>>> main housing but it won't come all the way off. What am I doing wrong?
>>>> 
>>>> Thanks. Greg
>>>> 
>>>> Sent from my iPhone
>>>> _______________________________________________
>>>> fot at autox.team.net
>>>> 
>>>> http://www.fot-racing.com
>>>> 
>>>> Donate: http://www.team.net/donate.html
>>>> Archive: http://www.team.net/archive
>>>> Forums: http://www.team.net/forums
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/johnstydo at 
>>>> gmail.com
>>>> 
>>>> 
>>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye at 
>> comcast.net
>> 
>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20171226/f143df5e/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>