fot
[Top] [All Lists]

[Fot] TR type A OD

Subject: [Fot] TR type A OD
From: fogbro1 at comcast.net (EDWARD WOODS)
Date: Sun, 24 Dec 2017 07:59:08 -0500 (EST)
References: <BB5A8E2C-AF79-432C-9CE3-2C899EC9911B@icloud.com>
Greg,

You're not using the excellent article on the A type overdrive found on the 
Buckeye Triumphs technical site. 

Ed Woods
> On December 23, 2017 at 10:50 PM Greg Blake via Fot <fot at autox.team.net> 
> wrote:
> 
> 
> I am attempting to rebuild an A type OD over the holiday weekend. I tried to 
> separate the rear OD housing from the main OD housing after removing the rear 
> output flange and speedo drive. Once i removed the 6 nuts and washers, I had 
> to tap the studs with a brass drift to get the rear housing to separate from 
> the main housing. But now i can't get the rear OD housing to come completely 
> off. I can get about a 1/4" gap between the rear and main housing but it 
> won't come all the way off. What am I doing wrong?
> 
> Thanks. Greg
> 
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fogbro1 at 
> comcast.net
> 
>

<Prev in Thread] Current Thread [Next in Thread>