vintage-race
[Top] [All Lists]

Re: accusumps

To: "Jim Hayes" <hayes@mediaone.net>,
Subject: Re: accusumps
From: "Ron Schonscheck" <schonny@y2consult.com>
Date: Tue, 7 Nov 2000 20:08:00 -0700
anybody have the web address for accusump?

----- Original Message -----
From: "Jim Hayes" <hayes@mediaone.net>
To: "Sadek Charles H DLVA" <SadekCH@nswc.navy.mil>
Cc: "'Phil Trenholme'" <dim1@home.com>; <vintage-race@autox.team.net>
Sent: Tuesday, November 07, 2000 6:32 PM
Subject: Re: accusumps


> But were accusumps available when the car was raced originally? Is an
> accusump "vintage?"
> (Oh, sh*t, did I really say that...)
> J
>
> Sadek Charles H DLVA wrote:
> >
> > Thanks to all who offered advice.
> > Chuck Sadek
> >
> > > -----Original Message-----
> > > From: Phil Trenholme [SMTP:dim1@home.com]
> > > Sent: Monday, November 06, 2000 10:55 PM
> > > To:   Sadek Charles H DLVA
> > > Cc:   vintage-race@autox.team.net
> > > Subject:      Re: accusumps
> > >
> > > The Accusump literature says to send it back to the factory. I would
> > > call their tech dept and see if you can get a more practical answer. I
> > > have had some good advice from their tech dept.
> > >
> > > Phil
> > >
> > > Sadek Charles H DLVA wrote:
> > > >
> > > >           Hi Folks,
> > > >                 What is the correct way to clean the accusump of
> > > possibly
> > > > contaminated oil (after an engine grenaded).
> > > >         Thanks,
> > > >         Chuck Sadek
> > > >         YS 73
>
> --
> Jim Hayes                  Fotec/Cable U
> hayes@mediaone.net         http://www.CableU.net
> jeh@fotec.com              http://www.fotec.com/
> All generalizations, with the possible exception of this one, are false!
>


<Prev in Thread] Current Thread [Next in Thread>