There was recently a long thread on this subject.
Assuming that you are talking about an electric fan,
I'd say my conclusion is that the optimum is a puller
fan mounted on the engine side. However, a pusher fan
on the front side of the radiator will work for most
applications, but with some lower efficiency, all
things being equal.
--- Mark Vaden <markvaden@gmail.com> wrote:
... someone mentioned that my fan
was bolted on backwards.
... which is the proper way for the fan to be mounted?
Is the fan supposed to
push or pull?
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|