> On Wed, 6 Jan 1999, Ronald A. Dowty wrote:
> > >
> > > How can I determine if I have a bad coil (TR6)?
> > >
>
> The suggestion to replace and see what happens is probably the easiest
> way but there are also dianostic procedures (too lengthy to describe
> here) to verify the continuity and function of the primary and secondary
> windings. I'm thinking of the Lucas Fault Diagnosis Manual, but there
> must be many manuals that contain the procedure since it is probably
> universal in its general approach.
>
> The condensor on the other hand, so far as I know, can only be diagnosed
> by replacing with a new one.
Geo Hahn
59 TR3A
|