triumphs
[Top] [All Lists]

Re: Oxygen sensor setup-

To: triumphs@Autox.Team.Net
Subject: Re: Oxygen sensor setup-
From: Egil Kvaleberg <egil@kvaleberg.no>
Date: Fri, 13 Feb 1998 15:57:13 GMT
Organization: Siving Egil Kvaleberg AS
References: <34D90406.2F4DF5BD@brit.ca> <Pine.OSF.3.95.980204171254.5213B-100000@ccins.camosun.bc.ca>
On 5 Feb 1998, Malcolm Walker wrote:

> My cheap-o meter (the REAL reason why I
> bought an analog) only goes down to 5V DC and 10V AC.  That means I have
> 1/5 of the scale to watch for 1 volt.

Worse than that. It will load the sensor so much that yoo will get a far 
too low reading anyway.
 
> When I'm rich and famous I'll buy a Fluke or similar beast.  For now it's
> the Radio Shack Special. :-(

A $20 digital meter will work just fine.

Egil
-- 
Email: egil@kvaleberg.no  Voice: +47 22523641, 92022780 Fax: +47 22525899
Snail: Egil Kvaleberg, Husebybakken 14A, 0379 Oslo, Norway
URL:   http://www.kvaleberg.com/           PGP: finger:egil@kvaleberg.com


<Prev in Thread] Current Thread [Next in Thread>