Re: [Mg-t] 54 TF engine timing

[Dave and Liz DuBois <ddubois@sinclair.net>]

Since the XPAG/XPEG engines only have a single timing point, one either 
adjusts them statically or uses a dial back timing light to set the 
timing.  Since i have a dial back timing light, I use that to set the 
timing at about 50 - 60 BTDC at idle and a total of  350 BTDC at around 
2800 rpm - 3000 rpm.

Cheers,
Dave
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive