In a message dated 7/21/2003 9:30:11 PM Mountain Standard Time,
RSpontelli@aol.com writes:
> If you do take some pictures, it's the corners that I'm having trouble
> visualizing how it might have been--No way that I pull or fold the material
> seems to
> make any sense to me.
>
Ramon,
It's very simple as to how it goes in. The edge of the headliner is held in
place along the edge by the furflex over the door (and glue) and held in place
in the back by the rear window rubber (and glue) The top and front are help
tight by the wire cross bows (hope you still have these)
Very simple if you are a pro at upholstery! Very difficult to get tight if
you are not. The guy I use take a heat gun and 25 years of custom rod
upholstery experience to the table with him. Somehow, they come out great!
Paul
|