Chuck here
Help!
I bought a carb sync instrument for my 70TR6
How do I get the little float to move
(It's not stuck!)
I removed the air filter Warmed up engine Choke off
Disconnected the carbs Turn the screws in 1 and a half
Idled about 1200 plus or minus
Held it on a carb and messed with what I thought was the adjusting screw
(maybe just holds the tube upright)
Then tried turning the center of the tool in and out
No luck :-(
Do I need to go higher on the idle speed
Do I have to hold it against the carb with superhuman force
(So no vacuum leaks)
Can somebody bale me out
Much appreciated
Chuck Ackerman 70TR6 Seattle, WA
|