Chuck Ackerman wrote:
>
> Chuck here
>
> Help!
> I bought a carb sync instrument for my 70TR6
> How do I get the little float to move
> (It's not stuck!)
> I removed the air filter Warmed up engine Choke off
> Disconnected the carbs Turn the screws in 1 and a half
> Idled about 1200 plus or minus
> Held it on a carb and messed with what I thought was the adjusting screw
> (maybe just holds the tube upright)
> Then tried turning the center of the tool in and out
> No luck :-(
> Do I need to go higher on the idle speed
> Do I have to hold it against the carb with superhuman force
> (So no vacuum leaks)
> Can somebody bale me out
> Much appreciated
>
> Chuck Ackerman 70TR6 Seattle, WA
Chuck, chuck it away and use a piece of hose to listen to the suction.
Been there, done that with synchronisers-total waste of money IMHO
Stu
|