To: | itswonderful@attbi.com, CoolVT@aol.com |
---|---|
Subject: | Re: heater hose adaptors |
From: | DJoh797014@aol.com |
Date: | Wed, 18 Jun 2003 23:31:15 EDT |
Before I switched back to stock, I ran into the same problem. Finally a plumber friend took same scrap 1/2 and 5/8 copper pipes, inserted the 1/2 into the 5/8 and then soldered it well. Left about 4 inches on each end. I cut to what I needed and then clamped it well. Never leaked a drop. You can push the hoses together so that the union almost disappears. Dave Johnson |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: heater hose adaptors, itswonderful |
---|---|
Next by Date: | Re: heater hose adaptors, itswonderful |
Previous by Thread: | Re: heater hose adaptors, itswonderful |
Next by Thread: | Re: heater hose adaptors, itswonderful |
Indexes: | [Date] [Thread] [Top] [All Lists] |