--- Dave Fain <kc3565l@sprintmail.com> wrote:
> . . . The
> shorter axles measure 11" between the U joint yoke
> and the dust shield, the longer ones are 12". . . .
I don't doubt you (and I don't have any here to
measure), but if the difference in axle length is
between the u-joint and dust shield and the uprights
are the same (I think they are), then it seems longer
axles would require a longer rear spring. Is there
enough slop in the spring bushings that you can
mismatch axles and springs without negative
consequences?
M D "Doc" Nugent
Renton, WA
_______________________________
Win 1 of 4,000 free domain names from Yahoo! Enter now.
|