[Top] [All Lists]

Re: Problem bolts-nuts

Subject: Re: Problem bolts-nuts
Date: Sat, 25 Jun 2005 13:05:40 EDT
In a message dated 6/25/2005 9:31:39 AM Pacific Standard Time, 

> <<<snip>>>
> GM sells a product in their parts dept
> <<<snip>>>
> Years ago, mid 70's, my brother worked for a GM dealership.  This had to be 
> pre O2 sensor days.  He used some sort of spray gunk to loosen frozen
> bolts.  It was VERY good.  As I recall had mostly a white label with black 
> or blue printing.  No eye candy pictures or graphics.  Just a plain label. 
> If the O2 sensor stuff is the same, it might even be better than PB Blaster 
> I've used.  Never tried Busty or Kroil as it's hard to find here.  In fact
> PB Blaster just showed up in the last few years.

Hi Blake, folks were raving about Kroil some years ago so I ordered some and 
its ok but not much better than WD40.....PB Blaster is better.  I got up off 
my butt and pulled out my can of Mr. Goodwrench "Rust Penetrant and inhibitor, 
Heat valve Lube"  Part no. 1052627.  Besides a bunch of other deadly stuff, he 
has Oleic acid, ammonium salt.   It has worked in cases where I could not get 
heat on the part.

///  unsubscribe/change address requests to  or try
///  Archives at

<Prev in Thread] Current Thread [Next in Thread>