TA,
Yup. That's the conclusion I'm coming to.
Cheers,
Lew
-----Original Message-----
From: owner-mg-mmm@Autox.Team.Net [mailto:owner-mg-mmm@Autox.Team.Net] On
Behalf Of TATERRY@aol.com
Sent: Monday, November 01, 2004 8:25 AM
To: lpalmer@roundaboutmanor.com; mg-mmm@Autox.Team.Net
Subject: Re: Distributor Clamps (was Lights- head lamps)
In a message dated 10/31/2004 9:56:40 PM Pacific Standard Time,
lpalmer@roundaboutmanor.com writes:
> Is it possible that the late PBs used the micro-adjuster? What about an
> N-type?
>
> TATerry, you have both a TA and an NA, what is your take on all of this?
>
Lew, My TA did not have its original engine so no help there. My NA has its
original dizzy but no micro-adjuster...just the clamp with one hold down
countersunk bolt to hold it in place. Our SA has one which should be
similar to
the TA. It is like what you call a TC. I don't seem to have any other
reference photo's showing a microadjuster on an N type.
It looks to me like what you have labeled as TA would only work on a MMM
engine as it has the countersunk hole that would line up with the hold in
the
block adaptor...as in your PA/B.
Cheers
Terry
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|