Re: Distributor Clamps (was Lights- head lamps)

["Peter Green" <p.green@mgk3.co.uk>]

Lew,

I have an original PB parts list and it also does not list the vernier type 
clamp, I am not sure of its date but I did look at it to see if one was 
listed at the beginning of this debate.

Peter.


----- Original Message ----- 
From: "Lew Palmer" <lpalmer@roundaboutmanor.com>
To: "'tom metcalf'" <mgtom@bright.net>; "'Jack Hardy'" 
<jnshardy@earthlink.net>; "'MMM'" <mg-mmm@Autox.Team.Net>
Sent: Saturday, November 13, 2004 1:26 AM
Subject: RE: Distributor Clamps (was Lights- head lamps)


> Apparently, the mystery continues.
>
> Does anyone have a PB parts list that might show the different clamp might
> have been used on PB production at some time? My copy is late enough 
> (1945)
> but doesn't list the part separately.
>
> For people joinging this thread late, see
> http://www.roundaboutmanor.com/airline/distclamps.htm
> And tell us the source of the clamp marked "?"
>
> Cheers,
> Lew Palmer
>
> -----Original Message-----
> From: owner-mg-mmm@Autox.Team.Net [mailto:owner-mg-mmm@Autox.Team.Net] On
> Behalf Of tom metcalf
> Sent: Friday, November 12, 2004 7:19 AM
> To: Jack Hardy; MMM; Lew Palmer
> Subject: Re: Distributor Clamps (was Lights- head lamps)
>
> Jack , that's exactly the same clamp my PB has, too.
>
> tommm
>
>
>
> ----- Original Message ----- 
> From: "Jack Hardy" <jnshardy@earthlink.net>
> To: "MMM" <mg-mmm@Autox.Team.Net>; "Lew Palmer"
> <lpalmer@roundaboutmanor.com>
> Sent: Thursday, November 11, 2004 5:31 PM
> Subject: Re: Distributor Clamps (was Lights- head lamps)
>
>
> > All MMMers,
> >
> > My PA1875 came to me with it's engine modified to PB spec. and a
> > microadjuster on the distributor the same as marked, "?" in the photos.
> > The
> > adjuster is very worn and allowed the timing to change +- several 
> > degrees.
> > I
> > do not have a non-vernier adjusting type, I locked it in place with a
> > modified large area washer under the mounting bolt & clamping the 
> > moveable
> > part. I realize that this does not help determine the source of this 
> > part,
> > but, for what it's worth, I wanted to report another P type with this
> > microadjuster.
> >
> >
> > Jack Hardy
> ///  unsubscribe/change address requests to majordomo@autox.team.net  or 
> try
> ///  http://www.team.net/cgi-bin/majorcool
> ///  http://www.team.net/mailman/listinfo
> ///  Archives at http://www.team.net/archive/mg-mmm
> ///  Send list postings to mg-mmm@autox.team.net
///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net