datsun-roadsters
[Top] [All Lists]

Re: POR 15

To: datsunmike <datsunmike@nyc.rr.com>
Subject: Re: POR 15
From: Pamela Pepoy <gppepoy@cybertrails.com>
Date: Fri, 16 Mar 2001 22:45:43 -0800
Mike,
Thank you. That is a great suggestion.  The most aggravating part of using this
paint is getting it out of the container.  When I tried to open the new can the
sucker was welded shut (by the paint).
I completely destroyed the can when I opened it.  Went to Home Depot and bought
a new can for 99 cents.  Have used seran wrap on the lid and have had little
trouble.  Good grief is it messy!!! Your suggestion is a beautiful thing.  I
love this list!!!!!!
Guy

datsunmike wrote:

> Punch some holes in the top and use tape over the holes when finished. It
> will stay liquid for a long time I opened and have been using the same quart
> for over a year. It's much better than trying to take the top on and off,
> that is, if you can. I pour small amounts into double plastic cups. It will
> eat through most plastics.
>
> Mike
>
> ----- Original Message -----
> From: "John F Sandhoff" <sandhoff@csus.edu>
> To: "Victor Laury" <vlaury@earthlink.net>
> Cc: <datsun-roadsters@autox.team.net>
> Sent: Friday, March 16, 2001 1:48 PM
> Subject: Re: POR 15
>
> > POR15. Good stuff. http://www.por15.com
> >
> > As a side comment:
> > > It can't stand UV exposure so it can't be applied where direct sunlight
> will hit it.
> >
> > UV exposure causes it to change color, but according to the company this
> > does not affect its other properties. I painted my roll bar black; it used
> to be
> > very shiny but now it's got a dark grey mottling. Only paint failure is
> where I've
> > scraped it off by dragging the hardtop across it.
> >
> > They make a few 'colors' - black, silver, and chassis black (which isn't
> quite
> > as shiny). I agree with buying the 6-packs - it's expensive per ounce that
> way,
> > but once you open a jar it'll harden up on you pretty quickly. After
> opening,
> > store them upside down to buy a little more shelf life.
> >
> > It is impervious to gasoline, too. I've had some in contact with gasoline
> for
> > three continuous years - no failure.
> >
> > DO NOT BREATHE THE FUMES. This stuff reacts with moisture. You do
> > NOT want it in your lungs!
> >
> >  -- John
> >      John F Sandhoff   sandhoff@csus.edu   Sacramento, CA

<Prev in Thread] Current Thread [Next in Thread>