RE: Toyota caliper upgrade

["Philip E. Barnes" <peb3@cornell.edu>]

Thanks, Hugh! This is exactly what I wanted to know.

--Phil

At 12:47 PM -0700 9/26/03, Hugh Barber wrote:
>Phil,
>
>Irrespective of whether the late TR6 caliper has metric hydraulic threads,
>the caliper-end fitting on the hard pipe is not compatible with the Toyota
>caliper.  One must either use a longer flex hose with appropriate ends or
>fabricate a new hard line with the TR fitting on one end (the end that goes
>to the flex hose) and an ISO metric bubble flare on the other end (the end
>that goes to the Toyota caliper).
>
>Hugh