In a message dated 7/20/01 12:46:06 PM Eastern Daylight Time,
anabil@caltel.com writes:
> >So, what is the collective wisdom say about taking 4 SU HS4 carbs (or maybe
> >some other?) and setting them up on a TR4A engine?
>
> Don't know about TRs, but the Honda 600 Coupe I had used 4 Mikuni
> (siq) Carbs on a beautiful twin cam all aluminum, roller bearing
> engine that happily turned 8000 rpm. Of course this was still only
> 80 mph in fourth, but it was a real fun car, had independant rear
> swing axles that were chain driven!! At the local Hawaii autocrosses
> it was a Spridget killer :-)
>
My current 91 Honda Nighthawk 750 has four Mikuni carbs mated to a 16-valve
four-cylinder that puts out 67 smooth hp to a chain-driven rear wheel. With
a top speed of 130 mph in fifth at 8500, it, too, is a Spridget killer ;-)
Chris Eck
91 Honda CB 750
59 Bugeye
59 TR3A
93 Audi S4 TQ
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|