| To: | Bob Danielson <rdaniels@snet.net>, Triumph <triumphs@autox.team.net>, "'Trevor Jordan'" <tjordan@vic.bigpond.net.au> |
|---|---|
| Subject: | RE: Bumper Removal |
| From: | Gernot Vonhoegen <gernot.vonhoegen@stir.ac.uk> |
| Date: | Sun, 17 Jan 1999 13:58:08 -0000 |
<<If you put the bumper back without the overriders, you will need
some
> spacers between the body and the bumper. I found oversize 10mm washers
> (50
> mm OD) to be suitable. You need about 6 to 8 mm of spacer or 3to 4
> washers
> on each side.
>
> Trevor Jordan
> 74 TR6 CF29281U>>
>
<Snipped an otherwise fine description out>
Just wonder if there are different tolerances, I didn't need any
washers between body and bumper after removal of the overriders, anyone else
care to comment?
Gernot
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | TR6 wood fascia, Frank & Carol Bandre |
|---|---|
| Next by Date: | RE: Bumper-ettes, Over-riders, T**'s, Gernot Vonhoegen |
| Previous by Thread: | Re: Bumper Removal, Frank & Carol Bandre |
| Next by Thread: | Re: Bumper-ettes, Over-riders, T**'s, Radley, Jack |
| Indexes: | [Date] [Thread] [Top] [All Lists] |