It's a bummer that a windshield repairer won't take responsibility for
breaking your windshield. But is it much of a risk? Are our windshields
especially tricky to install?
Daryl
----------
> From: Larry and Sandi Miller <millerls@msn.com>
> To: David Ramsey <dwramsey@worldnet.att.net>; carolien coulter
<carolien@coastalnet.com>
> Cc: spridgets@autox.team.net
> Subject: Re: windshield
> Date: Thursday, May 21, 1998 6:41 PM
>
> What Crash says is true. All the shops in this area have that same
policy.
>
> Larry
> -----Original Message-----
> From: David Ramsey <dwramsey@worldnet.att.net>
> To: carolien coulter <carolien@coastalnet.com>
> Cc: spridgets@Autox.Team.Net <spridgets@Autox.Team.Net>
> Date: Thursday, May 21, 1998 6:23 PM
> Subject: Re: windshield
>
>
> Hi Carolien,
> Well Larry and never seem to to things the same way. What I did was to
> install the rubber in the frame with a little silicon and the glazing
rubber
> to the inside. Then with my cotter pin removal tool (kind of a bent
> screwdriver with a pointed tip that you can get at sears) working from
the
> inside very carefully and slowly worked the rubber around the windshield
> with no silicon. Then I installed the rubber strip with my pizza cutter.
> Crash
> p.s. If you take it to a shop as I tried to do they are not responsible
for
> breaking the glass unless you bought it from them. Something you need to
be
> sure of before you have them do it.
>
>
>
|