spridgets
[Top] [All Lists]

Re: windshield

To: "Peter Samaroo" <mrbugeye@hotmail.com>
Subject: Re: windshield
From: "carolien coulter" <carolien@coastalnet.com>
Date: Thu, 21 May 1998 15:41:20 -0700
Cc: <spridgets@Autox.Team.Net>
Reply-to: "carolien coulter" <carolien@coastalnet.com>
Sender: owner-spridgets@Autox.Team.Net
-----Original Message-----
From: Peter Samaroo <mrbugeye@hotmail.com>
To: carolien@coastalnet.com <carolien@coastalnet.com>
Date: Thursday, May 21, 1998 12:08 PM
Subject: Re: windshield


>Is this a bugeye(one piece frame) or a later spridget(four piece frame). 
>
Bugeye, one piece frame. Sorry I forgot to add my " '59 Bugeye" at the end

>>From: "carolien coulter" <carolien@coastalnet.com>
>>To: <spridgets@Autox.Team.Net>
>>Subject: windshield
>>Date: Thu, 21 May 1998 14:49:59 -0700
>>Reply-To: "carolien coulter" <carolien@coastalnet.com>
>>
>>Hi everyone,
>>I need a 101 on windshield installation. Everything is out. the frame 
>etc. I
>>s it necessary to use silicone sealant between the frame and rubber 
>seal and
>>between rubber seal and glass? Do you put the rubber seal around the 
>glass
>>first and then install the whole thing in the frame or do you put the 
>seal
>>in the frame and the try to install the glass? ( not that either way 
>has
>>worked for me all day!).Or do you install the fram on the car and then 
>try
>>to put glass and seal in ? Any tips are greatly appreciated. because 
>right
>>now I'm awful close to heading for the glass shop.
>>Thanks Carol.
>>
>>
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>


<Prev in Thread] Current Thread [Next in Thread>