Just plug the injection ports. You can use standard pipe plugs, though
flat brass with a hex opening look a bit neater.
On the 9:1 1500 autocross motor I built I ran regular gas on the street,
no problem. For events I advanced the timing about 4 degrees and used
a mix of about 1 gallon of 110 octane leaded race gas mixed with 5 - 6
gallons of regular unleaded.
For street use you should be fine with an 87 octane fuel in a 9 to 1
engine.
mjb.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|