At 23:34 8/24/2003 -0400, ZoboHerald@aol.com wrote:
>Assuming this is a three-rail gearbox, sounds to me as if one or more of the
>various bushings in the linkage has gone away. Odds are that a rebushing kit
>(Triumph p/n 519770; around $34 from all the usual suspects) will take care of
>the problem.
>
>--Andy Mace
I had the same thing happen to me. Bought the kit and found when I put it
in that a small plate that you push against to go to reverse had come
unscrewed. Screwed it back on and everything was good. Rebushed the
gearbox anyway, I had the parts and I was already in there.
Andy L.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|