The small piece of metal patch might be a good idea to try.
I suspect the hole is larger than 0.002", but lets just assume that it is
0.031" which is about 1/32" (still pretty darned small). At 200 psi that is a
net pressure on the patch of about 2.5 ounces.
> *JB weld, a small square of beer can and a good hose clamp . . think this
> way: the pressure may be high but you're dealing with a .002" hole so the
> effective pressure will only be*
> *.002 of high pressure Per Square Inch. .002ths of 500 PSI is only about a
> pound!
> *
> *(Ducking for cover)*
>
> *Tony*
> *
>
> *
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|