shop-talk
[Top] [All Lists]

Re: [Shop-talk] Epoxy/JB Weld on auto a/c line?

To: Randall <tr3driver@ca.rr.com>, shop-talk@autox.team.net
Subject: Re: [Shop-talk] Epoxy/JB Weld on auto a/c line?
From: Steven Trovato <strovato@optonline.net>
Date: Mon, 06 Jun 2011 16:39:17 -0400
Well, they filled mine with refrigerant, because it is cooling fine now.

-Steve

At 04:26 PM 6/6/2011, Randall wrote:
> > I think you're right, but then the only way they find the leak is by
> > filling it.
>
>But they don't necessarily fill it with Freon.  When I went through this a
>few years ago, I believe it was nitrogen they used for leak checking.
>(Turned out to be the compressor leaking through a joint in the housing,
>only at high pressure.)
>
>-- Randall
>_______________________________________________
>
>Shop-talk@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.96
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/shop-talk/strovato@optonline.net
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>