It can't hurt much to try, but don't hammer the ez-out in, just push it
in by hand. Make sure it has good sharp corners. A left hand drill bit
might also work.
Please let us know how you do.
Peace,
Pat
Thusly spake BJNoSHOV8, On 2/25/2011 8:10 PM:
> Well I didn't know, and EZ-outs are tapered a bit so they might grab
> just the coil at the top and unscrew the coil just like if you could
> grab the end of the coil at the top.
>
>
>>> Bend the end of the coil more and unscrew
>>> it with a needle
>>> nose pliers?
>> That has worked for me in the past, but as Pat said it needs to be
>> the top
>> of the Helicoil (so it tends to shrink while you unscrew it). IMO
>> anything
>> that tends to spread it (like an easy-out) will just lock it in place
>> tighter.
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/pat at hornesystemstx.com
>
>
>
--
Pat Horne, Owner, Horne Systems
(512) 797-7501 Voice 5026 FM 2001
Pat at HorneSystemsTx.com Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --
|