shop-talk
[Top] [All Lists]

Re: [Shop-talk] Replacing a damaged helicoil

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] Replacing a damaged helicoil
From: Pat Horne <pat@hornesystemstx.com>
Date: Fri, 25 Feb 2011 20:57:47 -0600
It can't hurt much to try, but don't hammer the ez-out in, just push it 
in by hand. Make sure it has good sharp corners. A left hand drill bit 
might also work.

Please let us know how you do.

Peace,
Pat


Thusly spake BJNoSHOV8, On 2/25/2011 8:10 PM:
> Well I didn't know, and EZ-outs are tapered a bit so they might grab 
> just the coil at the top and unscrew the coil just like if you could 
> grab the end of the coil at the top.
>
>
>>> Bend the end of the coil more and unscrew
>>> it with a needle
>>> nose pliers?
>> That has worked for me in the past, but as Pat said it needs to be 
>> the top
>> of the Helicoil (so it tends to shrink while you unscrew it).  IMO 
>> anything
>> that tends to spread it (like an easy-out) will just lock it in place
>> tighter.
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/pat@hornesystemstx.com
>
>
>

-- 
Pat Horne, Owner, Horne Systems
(512) 797-7501 Voice            5026 FM 2001
Pat@HorneSystemsTx.com  Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>