shop-talk
[Top] [All Lists]

[Shop-talk] technical question about force applied to mount

Subject: [Shop-talk] technical question about force applied to mount
From: ejrussell at mebtel.net (Eric J Russell)
Date: Thu, 10 Feb 2011 21:59:29 -0500
References: <OFF90A6187.6DD44618-ON85257834.0008699C-85257834.000B718F@mail.megageek.com>
I have a HF tire changer like that. I put some tee nuts in a piece of 3/4"
plywood (~ 4'X4' but mounted slightly off-center). To use the tire changer I
put the plywood down, attach the tire changer and have at it. As long as I
am standing on the plywood, any torque applied goes toward changing the
tire.

Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message ----- 

> Or, does anyone else have any ideas on how to mount this changer so it is
> movable?

<Prev in Thread] Current Thread [Next in Thread>