shop-talk
[Top] [All Lists]

Re: [Shop-talk] technical question about force applied to mount

To: eric@megageek.com
Subject: Re: [Shop-talk] technical question about force applied to mount
From: "David C." <cavanadd@frontier.com>
Date: Thu, 10 Feb 2011 18:34:39 -0800
I have one, and always bolted it to the floor into anchors when I needed 
it, and put it away when I didn't.  I know of some people that bolted 
theirs to a sheet of plywood and then used it that way, standing on the 
plywood. But this was all for motorcycle tires...

eric@megageek.com wrote:
> OK, here is my question...
>
> I have this tire changer...
>
> <http://www.harborfreight.com/portable-tire-changer-34542.html>
>
> I can't mount it in my floor (I have radiant heat floor with pipes running
> in it.)
>
> I want to mount it to a metal 'arm' like mount that I can clamp to my
> welding table (at 3 tons, the table isn't going anywhere.)
>
> My question is, what kind of force is put on the base of that tire
> changer?  I'll be about 5' away from the mounting point, so I'm trying to
> figure out how big of an arm I need to make.
>
> Or, does anyone else have any ideas on how to mount this changer so it is
> movable?
>
> Thanks in advance.
>
> Moose
> "Be as beneficent as the sun or the sea, but if your rights as a rational
> being are trenched on, die on the first inch of your territory." Ralph
> Waldo Emerson
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>